Reef Angel Forum

sump wall,

it is touching my sump glass and i got compact flursent bulb wich i think in hot wather now and evaporation can conduct stray current to my water

the problem gone after i removed the reflector and isolate it well

i figured the problem

stray current from my reflector

would u confirm ???

Can you override the port? Have you tried the ControllerTester code? i add turn off on feeding mode skimmer were off even when i was using old libraries i watched the controller and i found it was restarting alone and set the delay time to 5 minutest then wotrk for about few second and some times f...

can stray current make the controller restart and cause this problem
i am not sure

would some body answer please

after insatlling fresh new reef angel client suite
i cannot enter the memmory tab

i got the latest online version of libraries Controller is running dev libraries v.1.0.9

i dont know whats happen to my skimmer is shutdown alone i notice that happens alone every two or three days i plug it to port 2 always on mode dontknow what is the problem #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include <Wire.h> #include <OneWire.h> #include <Time...

would you give me the code for that Roberto please

but it is ignoring my internal memory settings for % of starting parabola

CODE: SELECT ALL ReefAngel.PWM.StandardActinic(InternalMemory.ActinicOffset_read()+60); // Parabola using actinic offset When i use this code the relay start at the time of the actinic offset and shut down at the end in the same time the ap pwm signals still works for additional hour while the relay...

rimai wrote:Ahh..
So, you want mh on the standardlights and both actinic and daylight on the standardlights + offset?
Is that it?
Both AP and DP will dim together, right? Or you also want offset for AP and DP?

This is what i need
Offset for ap and offset for dp

I try it doesnt work and both white and blue channels ignored my pwm settings

ReefAngel.ActinicLights( Port7 ); // turn port 7 with actinic offset over standard lights schedule ReefAngel.DelayedStartLights( Port8 ); // turn port 8 using standard lights schedule ReefAngel.PWM.ActinicPWMParabola(120); // Parabola using actinic offset ReefAngel.PWM.DaylightPWMParabola(InternalMe...

Here is my light system so u can imqgine what i am talking about
I have blue and white led and metal halide i need blue first then white then metal halide

Why 120 i just need it to start before white led with 60 minutes

I tried it but it didnt work

CODE: SELECT ALL
ReefAngel.PWM.StandardActinic(InternalMemory.ActinicOffset_read()+60); // Parabola using actinic offset

So do i have to add+60 to the code as i showed before

what i am running now on the actinic offset it bothe white and blue led

and the metal halide on standard day light schedule

and what i am trying to modify i having different offset for white and blue led

i hope you understand what i mean

but i still need to start the white led before the metal halide

so

actinic start first
then white led

then metalhalide

hi roberto i need the actinic to start before daylight with 60 minutes note : that i have both blue led and white led working on acticin offset i need to make blue led start before white with 60 minutes this is the original code #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi....

plug your wifi attachment to the cable be sure the cable is in the right direction as mentioned in the manual start the wifi setup wizard wait until it communicate with your wifi attachment enter the local name you add to your router ... ex " my home router " myname " ...dlink ...etc ...

would you please review my code and confirm it thank you #include <avr/pgmspace.h> prog_char menu0_label[] PROGMEM = "feedmode- waterchg"; prog_char menu1_label[] PROGMEM = "ATO - Overheat"; prog_char menu2_label[] PROGMEM = "calibrate ph - sal"; prog_char menu3_label[]...

thank you roberto
it worked now well

How can I run jar file on vista thank you

I set both to start at 13% and end 50 %

also the client suite is stucked to on mode and i cannot change it to auto


would you please define the problem roberto as i am getting bored

thank you

It ignoring my internal memory setting now and it started from zero although I adjust the start on 13% and it is in auto mode

Yes, single offset for both. Replace what you have with the code above sorry this is the first time i replace code would you help me here is my code would you replace it for me so i learn #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include <Wire.h> #include <OneWire.h...

is this code IS AN offset for each AP and DP OR for both of them together?

and should i place it in the custome code area?

aslo dont forget that i will be connecting

blue and white led on relay 7
metalhalide on relay 8