Reef Angel Forum

What values for AP and DP does the screen show when you override port5 on? When the lights are on, if I override (toggle ports on my app) they shut down the lights and in the screen, they show the 00% in the lights. But I needs to get the lights on when they're off, then I tried to override (app or...

Sorry, I didn't understand what you meant. Did you try using the wizard? When I start with this controller I used the wizard but now I modify the same code. My LEDs ares hooked to the pwm channels but they are preprogrammed to gets on at 3pm to 1am, I want to get the alternative to get the lights o...

bump

I do that but the ports only shuts off when they are on but when are off, they dont turns on back.   #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include <Wire.h> #include <OneWire.h> #include <Time.h> #include <DS1307RTC.h> #include <InternalEEPROM.h> #include <RA_Noki...

I got a port in my relay box without use and i need to know if i can do something in the code to get lights on when i turns on the port in the portal or my iphone app. My Leds are hooked and programed in the code but if i need to verify something in the tank, i needs to get the lights on or somethin...

The complete instructions for the update and if the update to the wifi adapters needs to reconfigure again?

If I update the wifi firmware I need to configure again? The complete instructions its just adding that to the code?

Im in the same boat. I will subscribe this topic to get alert to solve this problem that's let me going crazy finding why it's occurs. For now, the only option it's wait for rimai find the problem.

Im in the same boat. I will subscribe this topic to get alert to solve this problem that's let me going crazy finding why it's occurs. For now, the only option it's wait for rimai find the problem.

What's the difference? I need the code to start my lights at 5pm

Still have this problem! The white ports gets on randomly and if I disconnect the VGA cable, gets the actinic a lights on too. The method to resolve the problem it's unplug the VGA cable, disconnect from the wall the relay box, connected again the relay box and then connect the VGA cable and then th...

In The HU menu i don't have that lights setup. Can I make a code I don't using to make if x port on, pwn on at 100% or something?

Thanks Steve

How do I downgrade the libs? Or where I found the 1.0.7 libs to change it in the pc

What can I do now? My sketch its too big after update. Can I reuse the older libraries? 1.0.7?

the VGA cable disconnected its the only method i found to get the relay box to normal activity. Like a reboot. Here its my code     #include <ReefAngel_Features.h>     #include <Globals.h>     #include <RA_Wifi.h>     #include < Wire .h>     #include < OneWire .h>     #include <Time.h>     #include ...

I got my lights hooked in my pwm ports buts if I need to get the lights on for maintenance of something, how do I can gets on? I got my wifi attatchment and iPhone app working but I don't know how to do it. Another thing it's when the lights are on, if I get other ports of like moonlights or wavemak...

Hi to all. Just curious about what happens inside the relay box because in 3 times randomly in 2 weeks my pwm ports gets on at 100% both. My lights are hooked to the ports and when I awake in the night, I saw the tank with the lights on at 4:30am. When that's happens, I unplug the relay box from the...

Great service!!!

Here's the same code without the changing temperature colors: #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include <Wire.h> #include <OneWire.h> #include <Time.h> #include <DS1307RTC.h> #include <InternalEEPROM.h> #include <RA_NokiaLCD.h> #include <RA_ATO.h> #include <...

cosmith71 wrote:I can't help with the code, but consider an upgrade to the RA+ board. I did, and it's saved me a lot of headaches.

--Colin

thanks Colin. I will need to do this soon when i add some gadgets to my system like an Wp40 or when the wp25 gets to the market.

binder wrote:Just compiled the code I posted using libraries 1.0.7 and it compiled in at 30,228. I'm using an older version of Arduino (1.0.1) and on Linux, so you should be good.

thanks Binder, i will check this.

I want to remove the colors because i dont need them. just i dont know what im doing worng editing the colors that shows me an error. i will try to upload this code because im at work now. what do i need to erase in the temperature colors to make it work?

Can you help me with that! I just know the basics and most of time I erase something give me an error. I'm a noob in coding or mosofyins a clde

I removed the custom screen and still too big when I compiled the sketch.

If you can live without custom colors that will save you a ton of space. Yes, I can live without that! The custom screen it's from another user in the screen thread but if I can make a new one with only the temp on big numbers, ph and relay box it's ok for me! The custom color just remove that line?

The 3 minutes slope is for the transition of light as natural as possible. Thanks

You should be able to do this... ReefAngel.PWM.SetDaylight(PWMSlope(17,0,0,3,0,12,3,0)); ReefAngel.PWM.SetDaylight(PWMSlope(18,30,22,33,12,45,3,ReefAngel.PWM.GetDaylightValue())); The first line sets the daylight port to start at 5:00 and end at 12:03am with a 3 minute ramp up and down from 0%-12%....

I need if someone can do a miracle in this sketch to fit in my RA. I know its too big because my ph coding its complicate but im trying to add the PWM codes and that adds 1800 bytes more than i without control my lights!!! Í think my custom screen its killing my memory too but if someone let me know...

I will make the harness to the drivers to test it! I don't understand the arduino sketch of the lamp controller to modify that controller