Reef Angel Forum

I am having constant ATO timeouts This does not seem to be working for me: ReefAngel.WaterLevelATO(1,Topoff,15,85,95); Translated to me, this means if waterlevel(1) hits 85% turn on turn on (Topoff) until 95% for a max of 15 seconds. I put the below code in instead. Any thoughts? Why isn't it workin...

'Lo all. I put this buzzer code in buzz the buzzer rings constantly. Can anyone advise where I went wrong? And also, how do I get this to NOT trigger my ATO Timeout? Should I be using analogWrite or digitalWrite? I have an analog RA (not PWM). // Buzzer if temp is too high or low, or waterlevel 1 is...

Hi All. Can I get some thoughts on this ATO routine and tell me if there are conflicts? // Main Top Off ReefAngel.WaterLevelATO(1,Topoff,15,85,95); // just to be safe if the water level gets to 135 or greater, turn off the topoff. if ( ReefAngel.WaterLevel.GetLevel(1) >= 135 ) ReefAngel.Relay.Off (T...

Smotz wrote:'lo all - I just opened a brand new RA I bought from Reef Radiance and I can't get the temp probes to work.
I have all 3 connected and they all say Error. For the record, I already the the power cycle.

What do I have to do to get these going?

Found it - one bad probe spoils the bunch!

'lo all - I just opened a brand new RA I bought from Reef Radiance and I can't get the temp probes to work.
I have all 3 connected and they all say Error. For the record, I already the the power cycle.

What do I have to do to get these going?

Sorry - found it!

http://www.reefangel.com/productview.aspx?p=usbpower

I just unboxed a new RA plus analog and there is a cable I do not recognize -

A USB to 3 pin connector (Female) - the type that plugs in to the temp port.

Can someone tell me what this is for?

Any way to get the Apex WAV system to work on the RA ?

Hi all.

My MultiLevel water sensor readings fluctuate by 1 or 2 in either direction constantly. Is that normal or should it be rock solid?

Thanks, Lee.

It seems to of stabilized now.

I did all the basics - swapped harnesses, swapped ports, swapped Jebaos. I think the RA had a brain fart. I rebooted it a dozen times & re-uploaded the code.

Was weird.

Hi All, I have my 2 Jebao wavemakers connected via actinic and daylight ports using the wiring harness. The actinic port (right wave) doesn't seem to be responding correctly. It is not turning off when supposed to, and the power level is incorrect. I woke up to a sandstorm this morning. How can I tr...

It was the firewall I put in - Sophos UTM 9 - it blocks everything! Couldn't figure out how to enable things. I put Untangle back in - all is well in the world.

Roberto - thank you for everything!

rimai wrote:Also, make sure you have the Portal function in your code.
The Portal is only updating in live mode, but it is not receiving data for some reason.

I thinking it's the Sophos UTM9 firewall I put it. Gonna switch back to Untangle tonight and see how that goes.

Scratch that - I am not getting notifications :( Roberto - I got a few yesterday while you were testing but nothing since. The portal looks like it's updating...kinda.. I'll try the wifi thing you suggested but anything you can think about on your end.. It's not updating some things - for instance, ...

Hello all,

If the first number in the ReefCrest mode is WaveSpeed - % for average speed, what can I expect the range to be ?

I am getting them now. Looks like a DNS thing. I use NO-IP to resolve http://www.meanbiak.com to my dynamic IP. When I put http://www.meanbiak.com as my wifi address it automatically translates that to my current IP and doesn't keep the hostname. in any case, thank you for your help - it looks good ...

Thats really bizarre - I see that too, now. On the portal I am able to toggle my devices - I turned my fuge light on and off..

rimai wrote:Can you go ahead and edit every one of your triggers and save them again?
Let me know if that helps.

Did it twice. Still not working. What am I doing wrong?

thanks lee!

I don't think my notifications are working..

Can anyone else confirm ?

Can someone tell me how to accomplish this?

My bad. All fixed. Looks like I had an IP in my user config instead of my DNS hostname. Not sure why I would do that but all fixed.

I think I got some IP Masquerading rule issues..

Man, this place cleared out..

I am also able to get to my water lever chart @
http://forum.reefangel.com/status/chart ... filter=WL1

But still the portal doesn't work.
Does it work for anyone or is it just me?

Odd problem here. I recently changed firewalls. I added the rules to do my port forwarding to my RA - which I know are working 'cause the android app works from both internally and externally. However, my Portal is not working. When I look at the RA Portal, the wifi IP address is wrong. I use No-IP ...

Yes I do. Didn't think it was that much information.

How do you have your configured? Is there another way?

'Lo all.

I just put on some parental controls on my internet and I discovered lots of traffic from my RA WiFi - in a day it accumulated 640MB of traffic.

I haven't figured out how much of that is up vs. down.

Can someone advise why this is?

Gotcha. I can do that.

This is a second RA for another tank.

Any concerns using 2 ? Do I need 2 portal user names?

That did it - Else is working correctly, now. Thank you!