Search found 22 matches
- Fri Jun 19, 2015 6:12 am
- Forum: How do I code ...
- Topic: How to turn off an 'always on' port a few times a day?
- Replies: 5
- Views: 6461
Re: How to turn off an 'always on' port a few times a day?
You can use it like this: ReefAngel.Relay.On(Port8); if (hour()==11 && minute()<20) ReefAngel.Relay.Off(Port8); if (hour()==16 && minute()<20) ReefAngel.Relay.Off(Port8); This does it! I just tested it and works perfectly. The idea is just now to have the feedings scheduled in the m...
- Fri Jun 19, 2015 6:10 am
- Forum: How do I code ...
- Topic: How to turn off an 'always on' port a few times a day?
- Replies: 5
- Views: 6461
Re: How to turn off an 'always on' port a few times a day?
You are right. The feeder is independent from the RA. I don't use feeding mode.binder wrote: how do you trigger your auto feeder? is it separate from the ra?
do you use feeding mode on the ra?
- Wed Jun 17, 2015 8:03 pm
- Forum: How do I code ...
- Topic: How to turn off an 'always on' port a few times a day?
- Replies: 5
- Views: 6461
How to turn off an 'always on' port a few times a day?
Hi folks, I'm trying to figure out a code to help me turn off port 8 that's currently setup as an 'always on' port. I need to turn it off for 20 minutes at 2 or 3 specific times of the day. I have an automatic feeder that I will program to work at those times. Currently dealing with food getting was...
- Mon Oct 13, 2014 8:19 pm
- Forum: Standard
- Topic: Wifi module works for a few hours and then stops
- Replies: 1
- Views: 1911
Wifi module works for a few hours and then stops
I have a problem with my wifi module. The unit will configure alright via utility but will only work for a few hours before failing again. The only way to have it going again is to run the wifi utility from scratch. A bit about my configuration: I have a network that does not broadcast the SSID and ...
- Fri Oct 03, 2014 1:35 pm
- Forum: Addons
- Topic: Wifi will not connect after firmware update
- Replies: 63
- Views: 165018
Re: Wifi will not connect after firmware update
And you tried this with both 9600 (default) and 57600 baud, correct? I hadn't until now and ISSUE IS SOLVED. This was my mistake (for informational purposes): 1. I updated firmware and then was trying every method for connection with no results. 2. I tried then to revert firmware via Macro suggeste...
- Fri Oct 03, 2014 7:41 am
- Forum: Addons
- Topic: Wifi will not connect after firmware update
- Replies: 63
- Views: 165018
Re: Wifi will not connect after firmware update
I saw the window on VeraTerm before. That is the one telling me But that's the one that reads "wifi attachment no ftp.ttl:25:wait". End and Pause are the only options there. Baud rate was changed to 57600 and there is an OK button on that window. However, that's the 'Setup -> Serial Port' ...
- Thu Oct 02, 2014 6:26 pm
- Forum: Addons
- Topic: Wifi will not connect after firmware update
- Replies: 63
- Views: 165018
Re: Wifi will not connect after firmware update
It blinks blue twice per green blink. When the wifi utility connects first the pattern is altered for a bit...
- Wed Oct 01, 2014 7:40 pm
- Forum: Addons
- Topic: Wifi will not connect after firmware update
- Replies: 63
- Views: 165018
Re: Wifi will not connect after firmware update
VeraTerm is giving me a "wifi attachment no ftp.ttl:25:wait" on a dialogue box with pause and End options. This happens right after I run the macro. I tried all 3 setup forms in the manual as well as this and nothing seems to be able to configure the attachment. The wifi utility connects t...
- Mon Aug 25, 2014 3:45 pm
- Forum: Standard
- Topic: Relay #3 is stuck in the ON position.
- Replies: 5
- Views: 5269
Re: Relay #3 is stuck in the ON position.
Yes, when svga is unplugged, the relay remains ON as do the pwm dimmers...
- Mon Aug 25, 2014 1:54 pm
- Forum: Standard
- Topic: Relay #3 is stuck in the ON position.
- Replies: 5
- Views: 5269
Relay #3 is stuck in the ON position.
Relay #3 is stuck in the ON position. I rebooted the board and unplugged/plugged the system. LCD screen shows relay as if it was off. However, anything that plugs into it, powers on. I have it as a doser powering an Toms aqua lifter pump. It only turns on for one minute a day. Yesterday, it started ...
- Thu Apr 17, 2014 5:05 pm
- Forum: Development Libraries
- Topic: Error: 'class DCPumpClass' has no member named 'LowATOChann
- Replies: 13
- Views: 17562
Re: Error: 'class DCPumpClass' has no member named 'LowATOCh
Sorry to be a pain. What should I do with which of these files?
- Tue Apr 15, 2014 1:28 pm
- Forum: Development Libraries
- Topic: Error: 'class DCPumpClass' has no member named 'LowATOChann
- Replies: 13
- Views: 17562
Re: Error: 'class DCPumpClass' has no member named 'LowATOCh
Hey guys, any word on this?
I am on 1.1 and have my DC pump on the ATO port. I tried the
ReefAngel.DCPump.LowATOChannel=Sync;
And now I'm getting the DCPump has no member compilation error. Is there a way to use wizard with the DC pump on the Low ATO with libraries at 1.1?
Thanks!
I am on 1.1 and have my DC pump on the ATO port. I tried the
ReefAngel.DCPump.LowATOChannel=Sync;
And now I'm getting the DCPump has no member compilation error. Is there a way to use wizard with the DC pump on the Low ATO with libraries at 1.1?
Thanks!
- Thu Jun 27, 2013 10:17 pm
- Forum: Addons
- Topic: SpeedWave/Jebao DC pumps
- Replies: 130
- Views: 98415
Re: SpeedWave DC pumps
Just placed an order for the DC4000 @ aquarium specialty. Not sure if I'll want to use it with RA or not... Will this work on the PWMs or is it an analog signal?
- Sat Jun 22, 2013 6:16 pm
- Forum: Apps
- Topic: Android Reef Angel Status
- Replies: 974
- Views: 625997
Re: Android Reef Angel Status
Gotcha Mike. Yours is for the seniors of this forum.
- Fri Jun 21, 2013 9:29 pm
- Forum: How do I code ...
- Topic: WP40 on the ATO PWM & Custom code
- Replies: 26
- Views: 25683
Re: WP40 on the ATO PWM & Custom code
Oscar, I added ATO PWM support to the DCPump library, so you can use the wizard and you'll just have to add ReefAngel.DCPump.LowATOChannel=Sync; to activate it :) If you use the code above you can choose custom from the portal or switch through all the modes. http://forum.reefangel.com/viewtopic.ph...
- Fri Jun 21, 2013 9:23 pm
- Forum: Apps
- Topic: Android Reef Angel Status
- Replies: 974
- Views: 625997
Re: Android Reef Angel Status
I seem to have a connection issue when I'm off my home network. I'm using the same address for my away host as with the Portal. The portal updates fine but when I try to access it through Reef Angel Status on my away settings I get a Error 15: Timeout. It works fine on my home settings. Any ideas? ...
- Wed Jun 19, 2013 5:39 pm
- Forum: Standard
- Topic: JEBO WP-40
- Replies: 407
- Views: 323585
Re: JEBO WP-40
Ok tanks! :) Looking forward to that else mode. I wish I could contribute something but I am just learning what the code is doing, nevermind trying to compose something, I know zero in programmation. The else mode seem pretty random and with very short pulse at least on the wp25 controller. The pul...
- Wed Jun 19, 2013 11:52 am
- Forum: How do I code ...
- Topic: WP40 on the ATO PWM & Custom code
- Replies: 26
- Views: 25683
WP40 on the ATO PWM & Custom code
Hello all, I just wanted to share my experience in hooking up a Jebao WP40 to my RA via the ATO PWM port. Hopefully this will save someone some time in the future. So I wanted to upgrade my tank flow and started getting curious about the WP40. From different forums and reviews, I gathered that it wa...
- Thu Jun 06, 2013 4:20 pm
- Forum: Tutorials
- Topic: Controlling Jebao/Tunze/Speedwave pumps
- Replies: 66
- Views: 61951
Re: Controlling Jebao/Tunze pumps
Only one ATO port can do PWM. pinMode(lowATOPin,OUTPUT); analogWrite(lowATOPin,ReefCrestMode(60,20,true)); The cable is designed to work on 0-10VDC signals. You will need to mod the cable if you want to use 0-5VDC signal. Take one resistor and bridge the pads instead. Roberto, I am also connecting ...
- Tue Jun 04, 2013 11:08 am
- Forum: Tutorials
- Topic: ReefAngel external web access [GUIDE]
- Replies: 8
- Views: 14650
Re: ReefAngel external web access [GUIDE]
Problem is my router only offers dynamic DNS from dyndns.org. I can't use a different one :( I wish I couldve Actually if you choose the dyndns from the dropdown menu and then input the host you get from no-ip.com, it works just the same... It stumped me too for a little while and then figured it's...
- Thu May 30, 2013 6:57 pm
- Forum: Standard
- Topic: JEBO WP-40
- Replies: 407
- Views: 323585
Re: JEBO WP-40
Hey folks, not trying to hijack your thread here. I need a bit of help with my controllable pump... Still trying to figure out if it's doable and if so how... I can't post links or send private messages I'm such a noob, but if you search for 'Help to connect a certain controllable pump to my ATO DWM...
- Thu May 30, 2013 6:56 pm
- Forum: Development Libraries
- Topic: Wave patterns
- Replies: 136
- Views: 262567
Re: Wave patterns
Hey folks, not trying to hijack your thread here. I need a bit of help with my controllable pump... Still trying to figure out if it's doable and if so how... I can't post links or send private messages I'm such a noob, but if you search for 'Help to connect a certain controllable pump to my ATO DWM...