Reef Angel Forum

Every Time my RA* reboots, all my relays are set to On for a second, making my lights to blink, turning my fans on.. and so on. I dont know if it is some kind of self test... The problem is that my water solenoid is also turned on, allowing some (not desired) water to enter in the system. How can we...

tngo wrote:That's a pretty cool feature Roberto. Thanks for implementing it in advance.

tim

Let's test It and post here

Enviado de meu Moto G (5S) Plus usando Tapatalk

Ok.. tks

Understood... No webwizard for me..

Roberto

I cant use the webwizard. I customized the library, modifying the waterlevel gain. Can I download the Dev library and use It?

BTW.. any chance implementing a custom waterlevel parameter to pass the gain? Would be awesome to use the webwizard.

Tngo tks for sharing.
In my case, rebooting had no effect. Let's wait for more ideas. If It happens when I am not home, I don't know what to do...

Hi In the last few days I've faced a bus lock issue in my RA*....twice... All the suddenly, my RA* stopped working, and turning it off and on seems to have no effect. My lights port is locked On, even if it is showing as Off both on Uapp or in the RA* screen. My concern is if any other port is turne...

Hi Roberto

I mean check by the program.. not by the user

hi

is there any way to check if the RA*:

a - has a local IP
b - is connected to the clound

?

Anyone?

Not using internal memory settings.

I am going to migrate from 100-199 to 200-299, and test it

Ps.: "c0:1" command stopped working again. Uapp got back using "cvar0,1". Maybe a rollback version?

Tks!

Tks Roberto it worked!! Another quick one: "mb:100:1" --> sets memory location 100 to 1 "mr" --> gets memory location from 200 to 379 (internal memory used by default functions) How do I get memory location values from 100 to 199? I used to use the old "/mr100,199", but...

Roberto May be nothing, but publishing the message "c2:1" to username/in does not take any effect. In fact, looking the messages using google chrome console log, when we try to change any variable it's sending the command "cvar2,1", and than the "out" channel responds w...

I use cheap float switchs in case of failure for both Auto Water Change and RobertoFlow system. The problem is that, from time to time, the floats tends to fail itself... well you may see the irony here.. the anti-failure system tends to fail. Any suggestions on a more reliable float switch? Is ther...

The incoming channel is always lowercase and the outgoing channel is always uppercase. So, to publish in the incoming channel to change variables or parameters on RA*. So, for what you are trying to do, you need to publish to username/in channel, the message "c2:1" Tks Roberto!!!!!!!!!!! ...

Tks Roberto Already modifying my python code. With RA+ I was getting the R99 from time to time. Now I can subscribe using mqtt and just wait for it :) Roberto Making progress with mqtt client and xmpp server to send push messages to celfone in real time. Two main features: Real Time push messages, ...

20" long and 1/2' diameter.

I think 25" won't be a problem.

Roberto

Both the patch and RA_CustomSettings.h configuration worked!!!!

Thank you again!!

Rafa

Tks Roberto

Already modifying my python code.

With RA+ I was getting the R99 from time to time. Now I can subscribe using mqtt and just wait for it

If I sniff the network I am able to get the commands. Just trying to avoid such work.

Hi there

The same way we have the "wifi commands" (http://forum.reefangel.com/viewtopic.ph ... i+commands, do we have a list of "mqqt publish commands"?

Somenthing like: user/outRON1:1 to turn on Relay01?

Best regards
Rafa

Hi I calibrated my ORP module according to the manual. I used the BNC Terminator and the 470mv buffer (purchased locally). After calibration, I rinsed the probe at RO water and put it back to the 470mv buffer... just to be sure. The ORP measurement was very very very close to 470mv - as expected. Bu...

Roberto Glad I could help. As soon as I get home from work, I give it a shot. Another question just to clear my mind: Using the arduino IDE to upload the code, my RA* seems not be able to connect to the cloud, even putting the comment's strings with user/pass created by the webwizard. Is that so? I ...

Ok Roberto I did some testing. For all tests, I used only RA * with Multi-Water Level directly connected through an Expansion Port. Everything else was disconnected. I used the same lean code: #include <Salinity.h> #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_TS.h> #include <RA_...

Roberto

I dont think It is the sensor limit. I was using the same pipe and the same sensor (attachment) before, but different controller (RA+ tô RA*).

Roberto

I am already using a 1/2" instead of a 3/4" pipe.

I Will have to try that... But I think It does since I was using Just Fine with RA+

Ok.. will be a littel difficlt do make myself clear since english is not my mother language... but let's try. - Download and install IDE v1.6.8 - done! - Download the latest dev branch of the libraries = done! - Changed addr+=0x03; to addr+=0x01; in waterlevel.cpp - done! - Code compiled and uploade...

Sure thing....

No.. Just the Arduino software from the Download section. Gonna try and get back..

Roberto

Just to register, I calibrated using ph7 and ph10 buffers and after that I tested measuring ph4 buffer and worked Just Fine!!!

No need for any library edition....