Search found 68 matches
- Wed Jan 10, 2018 11:49 am
- Forum: You and your tank
- Topic: Items for sale
- Replies: 9
- Views: 8774
Re: Items for sale
Everything is updated
- Wed Dec 27, 2017 1:15 pm
- Forum: You and your tank
- Topic: Items for sale
- Replies: 9
- Views: 8774
Re: Items for sale
Thank you binder, hope all the items worked out for your needs.
I do have the dimming module using it currently until a new part arrives for my current setup I can PM you when it comes in.
I do have the dimming module using it currently until a new part arrives for my current setup I can PM you when it comes in.
- Thu Nov 16, 2017 11:49 pm
- Forum: How do I code ...
- Topic: Dimming channel 3 on 3 times in 1 day?
- Replies: 4
- Views: 5797
Re: Dimming channel 3 on 3 times in 1 day?
didn't work, ended up getting it to work with this if (hour()>=12 && hour()<=21) ReefAngel.PWM.SetChannel( 4, PWMSlope(12,0,21,0,0,100,60,0) ); else if (hour()>=6 && hour()<=12) ReefAngel.PWM.SetChannel( 4, 3); else if (hour()>=21 && hour()<24) ReefAngel.PWM.SetChannel( 4, 3)...
- Tue Nov 14, 2017 2:29 pm
- Forum: How do I code ...
- Topic: Dimming channel 3 on 3 times in 1 day?
- Replies: 4
- Views: 5797
Re: Dimming channel 3 on 3 times in 1 day?
#include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include <Wire.h> #include <OneWire.h> #include <Time.h> #include <DS1307RTC.h> #include <InternalEEPROM.h> #include <RA_NokiaLCD.h> #include <RA_ATO.h> #include <RA_Joystick.h> #include <LED.h> #include <RA_TempSensor.h> #in...
- Tue Nov 14, 2017 1:59 pm
- Forum: How do I code ...
- Topic: Dimming channel 3 on 3 times in 1 day?
- Replies: 4
- Views: 5797
Dimming channel 3 on 3 times in 1 day?
I have my DIY rapid LEDs connected to my dimming module on channel 3.
Currently it goes on at 12pm - 9pm and does it's dimming cycle. from 0%-90%
I'd like it to also go on at 1% from 9pm to Midnight, and from 6am-12pm.
This way I can check on my frag tank in the morning. Is this possible?
Currently it goes on at 12pm - 9pm and does it's dimming cycle. from 0%-90%
I'd like it to also go on at 1% from 9pm to Midnight, and from 6am-12pm.
This way I can check on my frag tank in the morning. Is this possible?
- Wed Jul 26, 2017 8:23 am
- Forum: You and your tank
- Topic: Items for sale
- Replies: 9
- Views: 8774
Items for sale
I upgraded and down graded some of my equipment and am selling off a few items I'm not using. My LFS will give me a store credit for these items but figured I'd see if anyone needs them. I will ship if buyer pays shipping cost. 93 Gallon Cube Stand $50 Rapid LED SOLDERLESS 75G TANK DIMMABLE KIT with...
- Wed Apr 12, 2017 10:48 am
- Forum: My PDE/INO file
- Topic: GugsJr Code
- Replies: 1
- Views: 4315
Re: GugsJr Code
ReefAngel.StandardLights( Port1,14,55,1,5 ); //LED Power Supply ReefAngel.StandardLights( Port2,14,55,3,10 ); //LED Fans ReefAngel.StandardLights( Port3,22,55,2,15 ); //Front Moonlights ReefAngel.StandardLights( Port4,23,25,2,30 ); //Rear Moonlights ReefAngel.StandardLights( Box1_Port7,22,0,17,0 );...
- Mon Mar 27, 2017 4:34 pm
- Forum: Standard
- Topic: Litany of strange goings on...
- Replies: 24
- Views: 15131
Re: Litany of strange goings on...
Oh I see that, honestly I'm not sure. Roberto probably would be the person you need help from.
- Mon Mar 27, 2017 12:57 pm
- Forum: Standard
- Topic: Litany of strange goings on...
- Replies: 24
- Views: 15131
Re: Litany of strange goings on...
The labels? Or you mean you can't access the relays from the portal.
If it's the labels you have to change the names in the portal and download them to the app.
If you can't access the relays from the portals. Probably means your port forwarding isn't set up correctly.
If it's the labels you have to change the names in the portal and download them to the app.
If you can't access the relays from the portals. Probably means your port forwarding isn't set up correctly.
- Sat Mar 25, 2017 7:45 pm
- Forum: Standard
- Topic: Litany of strange goings on...
- Replies: 24
- Views: 15131
Re: Litany of strange goings on...
Looks like your temps are working. They are going to fluctuate a bit because it takes time for them to go on and go off. You can set the range a bit lower then 77 if you want it to get to 77
- Sat Mar 25, 2017 12:22 pm
- Forum: Standard
- Topic: Litany of strange goings on...
- Replies: 24
- Views: 15131
Re: Litany of strange goings on...
That's good to see.
- Fri Mar 24, 2017 6:37 pm
- Forum: Standard
- Topic: Litany of strange goings on...
- Replies: 24
- Views: 15131
Re: Litany of strange goings on...
Can you copy and post your code so we can make sure it's ok? Can you access the portal on the web? Are you trying to use the App from your phone/table?
- Wed Mar 22, 2017 5:01 pm
- Forum: Addons
- Topic: Jebao Pump Antisync turning off.
- Replies: 3
- Views: 3731
Re: Jebao Pump Antisync turning off.
Well it seems that something in the code is causing it I deleted all the pump code and just put in the code below and everything is working. ReefAngel.DCPump.UseMemory = true; ReefAngel.DCPump.DaylightChannel = Sync; ReefAngel.DCPump.ActinicChannel = AntiSync; ReefAngel.DCPump.AntiSyncOffset=110; //...
- Wed Mar 22, 2017 12:06 pm
- Forum: Addons
- Topic: Bluetooth Attachment
- Replies: 199
- Views: 295151
Re: Bluetooth Attachment
How do I order one since I don't see it in the store
- Wed Mar 22, 2017 9:39 am
- Forum: Addons
- Topic: Cloud Wifi Attachment
- Replies: 53
- Views: 136252
Re: Cloud Wifi Attachment
With this attachment can I upload code with out having to tether a cable to the reef angel from my laptop?
If so can you let me know when they are in, I'd like to order this with the salinity expansion
If so can you let me know when they are in, I'd like to order this with the salinity expansion
- Wed Mar 22, 2017 9:20 am
- Forum: Addons
- Topic: Jebao Pump Antisync turning off.
- Replies: 3
- Views: 3731
Re: Jebao Pump Antisync turning off.
The other 2 are at 25% and they are running Those are set to my Daylights and are in sync mode. Ones on the daylight dimming port on the relay box, the other is on channel 0 on the dimming expansion. I've actually been able to dim the PP8s to 10% and they were still running Currently they are in nig...
- Wed Mar 22, 2017 8:10 am
- Forum: How do I code ...
- Topic: Dimming past midnight and 2 dimming codes
- Replies: 0
- Views: 4226
Dimming past midnight and 2 dimming codes
I'm trying to get my lights to do two things. 1. End dimming to stop at 10% while in the memory. Currently it goes down to 0%\ 2. After the first schedule ends to start a second dimming schedule that will go past midnight. Example: Dimming Channel 2 At 2:30 lights come at at 1%, then Dim down to 5% ...
- Wed Mar 22, 2017 7:53 am
- Forum: Addons
- Topic: Jebao Pump Antisync turning off.
- Replies: 3
- Views: 3731
Jebao Pump Antisync turning off.
My Jebao pump (on actinic) keeps turning off after about 3.5 minutes, If I unplug it and plug it back in it will go off after 3.5 minutes again. Doesn't matter what mode the pump is in, does the same thing. The LED light on the ac adapter is green, the RA display is showing that the speed is set to ...
- Wed Mar 22, 2017 7:41 am
- Forum: Tutorials
- Topic: Custom Main Screens
- Replies: 166
- Views: 155782
Re: Custom Main Screens
Got my tank going and started diving in further into my Reef Angel. Here is what Display looks like, I modified reefer's code. I added the center channel and added code to display the offset speed of the antisync pump MyRADisplay.jpg //Custom Main, Graph & Menu static unsigned long PumpSpeed = I...
- Tue Mar 21, 2017 3:11 pm
- Forum: How do I code ...
- Topic: auto feed code not working.
- Replies: 3
- Views: 3973
Re: auto feed code not working.
Would this work? I just change the code from between 60 secs and 61 secs passed to turn on. To if it's a set time? //AutoFeeder static unsigned long autofeeding = 0; if (hour()==17 && minute()==0 && second() <= 2)//if it is 5 pm { ReefAngel.FeedingModeStart(); //START FEEDING MODE } ...
- Tue Mar 21, 2017 1:43 pm
- Forum: How do I code ...
- Topic: Lights on mode isn't working.
- Replies: 0
- Views: 3846
Lights on mode isn't working.
I need help with a certain part of my code and the lights. Since my LEDs dim to 0 when I use lights on it doesn't work with my current code. I can get the lights to come on but not go back to 0 after I use lights off. Current Code #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wif...
- Tue Mar 21, 2017 1:39 pm
- Forum: How do I code ...
- Topic: Off set my Daylight and Actinics?
- Replies: 7
- Views: 5389
Re: Off set my Daylight and Actinics?
Actually it is working. I had a different part of my code that was conflicting with this one. This is the code that is actually working. I think I'll post my conflicting code into its own thread. Than you for your help. ReefAngel.PWM.Channel1PWMParabola(); //Front Whites 4:00pm-10:00pm ReefAngel.PWM...
- Tue Mar 21, 2017 11:32 am
- Forum: How do I code ...
- Topic: auto feed code not working.
- Replies: 3
- Views: 3973
Re: auto feed code not working.
Thank you
That worked great. Now a new problem arose.
I also feed the fish Mysis shrimp at 9pm. Is there a way to get port 6 to stay off at 9pm?
That worked great. Now a new problem arose.
I also feed the fish Mysis shrimp at 9pm. Is there a way to get port 6 to stay off at 9pm?
- Tue Mar 21, 2017 10:12 am
- Forum: Addons
- Topic: Bus Lock from new dimming expansion
- Replies: 6
- Views: 5780
Re: Bus Lock from new dimming expansion
I have all LEDs on LDD drivers. Roberto helped me find the problem. I was extending the VGA cables from the reef angel head unit to the main relay box, then extending the expansion relay to the secondary relay box.
This was creating interference
This was creating interference
- Mon Mar 20, 2017 9:18 pm
- Forum: How do I code ...
- Topic: Off set my Daylight and Actinics?
- Replies: 7
- Views: 5389
Re: Off set my Daylight and Actinics?
This is what I have currently. I'm trying to get it so when I change something in the portal or the app it changes the lights for all of them. That way if my work schedule changes I just can do it quickly without having to go back and upload the code. I'm assuming this is starting from the daylight ...
- Mon Mar 20, 2017 4:31 pm
- Forum: How do I code ...
- Topic: auto feed code not working.
- Replies: 3
- Views: 3973
auto feed code not working.
I'm sure I have a setting off some where in here but I can't figure it out. I thought I had it set to go into feed mode at 5pm and then cycle port 6. After feed mode to go in to Nutrient Transport Mode for 2.5 hours. Looking at the relay graph it doesn't seem like it went into feed mode. Any help wo...
- Fri Mar 17, 2017 9:49 am
- Forum: My PDE/INO file
- Topic: GugsJr Code
- Replies: 1
- Views: 4315
GugsJr Code
Update Log 3-17-17 * Added Seasonal Temp * Added Go into feed mode at 5pm * Added Run feeder at 5:01pm * Added Nutrient Transport mode for 2.5 hours after feeding mode 3-20-17 * Added custom lcd screen Current list of Equipment 2 DIY Rapid LED 3 Jebaos 3 Heaters Dimming Module Expansion Relay Expan...
- Wed Mar 15, 2017 11:07 am
- Forum: How do I code ...
- Topic: Icecap battery backup feeding mode code
- Replies: 16
- Views: 13006
Re: Icecap battery backup feeding mode code
try this. I simplified it from the previous code I typed { if (ReefAngel.DisplayedMenu==FEEDING_MODE) feeding = now(); ReefAngel.PWM.SetDaylight( 0 ); ReefAngel.PWM.SetActinic( 0 ); } else if (hour()>=7 && hour()<8) { ReefAngel.PWM.SetDaylight( LongPulseMode(40,55,10,true) ); // Long pulse h...
- Tue Mar 14, 2017 6:42 pm
- Forum: How do I code ...
- Topic: Icecap battery backup feeding mode code
- Replies: 16
- Views: 13006
Re: Icecap battery backup feeding mode code
how do you have your Jebaos hooked up? On the original switch?
- Tue Mar 14, 2017 3:23 pm
- Forum: How do I code ...
- Topic: Icecap battery backup feeding mode code
- Replies: 16
- Views: 13006
Re: Icecap battery backup feeding mode code
// Feeeding and Water Change mode speed
ReefAngel.DCPump.FeedingSpeed=0;
ReefAngel.DCPump.WaterChangeSpeed=0;
ReefAngel.DCPump.FeedingSpeed=0;
ReefAngel.DCPump.WaterChangeSpeed=0;