Search found 19 matches
- Sun May 06, 2012 5:26 pm
- Forum: Standard
- Topic: LED Drivers question
- Replies: 9
- Views: 5722
Re: LED Drivers question
You are absolultelly right, thanks Steve!
- Sun May 06, 2012 4:26 pm
- Forum: Standard
- Topic: LED Drivers question
- Replies: 9
- Views: 5722
Re: LED Drivers question
Hi Steve, thank you for your help on this .. I´m planning to have 2 units with a total of 96 LEDs as follows (in 2 heat sinks about 18" each): 30 XP-G cool white 48 XT-E Royal blue 16 XP-E Blue 2 Violet UV I was thinking using Meanwell ELN 60-48P, which can have between 8 and 12 leds per driver...
- Sun May 06, 2012 12:32 pm
- Forum: Standard
- Topic: LED Drivers question
- Replies: 9
- Views: 5722
Re: LED Drivers question
Roberto, is there any info (curves perhaps) of how much non-linearity one could expect using a 0-10 analog with the PWM output? I asume that 100% input on the driver vía de PWM signal gives 100% output for the leds (is that right?), what about 50% or 15%? The reason for all this is because the selle...
- Sun May 06, 2012 11:44 am
- Forum: Standard
- Topic: LED Drivers question
- Replies: 9
- Views: 5722
Re: LED Drivers question
Hi Roberto the driver is a 700mA Hyperon from ReefLEDLights, is there a way to have a linear response with these?
Thanks!
Thanks!
- Sun May 06, 2012 11:05 am
- Forum: Standard
- Topic: LED Drivers question
- Replies: 9
- Views: 5722
LED Drivers question
I have the PWM version of RA, is there any way to control a 0-10 V ANALOG driver? Just to be sure before buying a DIY kit.
Thanks !!
Thanks !!
- Wed Apr 11, 2012 4:22 pm
- Forum: Standard
- Topic: Temperature effect on pH readings
- Replies: 2
- Views: 2818
Re: Temperature effect on pH readings
Hi Steve, thank you for your answer...
Daniel
Daniel
- Sun Apr 08, 2012 5:38 pm
- Forum: Standard
- Topic: Temperature effect on pH readings
- Replies: 2
- Views: 2818
Temperature effect on pH readings
Hi, I was looking at the temperature and pH graphs and was wondering if there is some temperature effect on the pH readiongs. From the graphs it seems that there is some correlation
- Fri Apr 06, 2012 8:45 am
- Forum: For New Members
- Topic: How to setup your wifi attachment
- Replies: 216
- Views: 474196
Re: How to setup your wifi attachment
Hi Roberto/Dave
I disabled the router Security Mode, and then I was able to set the IP to the wifi attachment and get it working (Client 2.2, and Reef Angel Controller Web Server).
I will try to reset the Security mode again and reset the wifi
Thanks
I disabled the router Security Mode, and then I was able to set the IP to the wifi attachment and get it working (Client 2.2, and Reef Angel Controller Web Server).
I will try to reset the Security mode again and reset the wifi
Thanks
- Thu Apr 05, 2012 1:28 pm
- Forum: For New Members
- Topic: How to setup your wifi attachment
- Replies: 216
- Views: 474196
Re: How to setup your wifi attachment
Hi, reinstalled all but I get the same (now the COM6 port was assigned) *Wifi* Status Associated: true Authenticated: false DHCP: false Mode: WPA2 IP adress and port: 0.0.0.0:2000 (remember that I used the "Restore Factory Settings" before, and since then the IP changed to this) and the bl...
- Thu Apr 05, 2012 12:34 pm
- Forum: For New Members
- Topic: How to setup your wifi attachment
- Replies: 216
- Views: 474196
Re: How to setup your wifi attachment
Hi, I have uninstalled all the software and starting to reinstall all again, lets see what happens ...
- Thu Apr 05, 2012 10:55 am
- Forum: For New Members
- Topic: How to setup your wifi attachment
- Replies: 216
- Views: 474196
Re: How to setup your wifi attachment
Hi Dave, there is a tab in the router with this info: MAC adress control Enable MAC filtering: disable Access Rule for registered MAC adress: allow MAC filtering table (up to 32 stations) (a table with ID, MAC address with six positions each row, all in 00) In the LAN settings of the Router it says:...
- Thu Apr 05, 2012 10:23 am
- Forum: For New Members
- Topic: How to setup your wifi attachment
- Replies: 216
- Views: 474196
Re: How to setup your wifi attachment
Hi Roberto, I tried that again (was the first soft I used before the newer one).
I still cant avoid teh green/blue blinking and the 0.0.0.:2000
There is another number instead of 2000 (I saw someone else used one different )?
I also tried at another pc , downloaded daves app, same result
Thanks!
I still cant avoid teh green/blue blinking and the 0.0.0.:2000
There is another number instead of 2000 (I saw someone else used one different )?
I also tried at another pc , downloaded daves app, same result
Thanks!
- Thu Apr 05, 2012 9:07 am
- Forum: For New Members
- Topic: How to setup your wifi attachment
- Replies: 216
- Views: 474196
Re: How to setup your wifi attachment
I get the same result if use:
SSID: XXXXXXX
PHASPHRASE/PASSKEY: yyyyyyyyyy (the other pass refered as Guest Password(PSK) above 10 letters and numbers)
SSID: XXXXXXX
PHASPHRASE/PASSKEY: yyyyyyyyyy (the other pass refered as Guest Password(PSK) above 10 letters and numbers)
- Thu Apr 05, 2012 9:01 am
- Forum: For New Members
- Topic: How to setup your wifi attachment
- Replies: 216
- Views: 474196
Re: How to setup your wifi attachment
Hi Roberto this is what I have , like is readed from the Belkin Router I´m using: In the Channel and SSID tab: SSID > XXXXXXX (7 letters) SSID Broadcast> Enable (other options : Disabled) Wireless Mode> Mixed (11b+11g) (other options 11g only, 11b only, off) Extend range> Disable (other option: enab...
- Wed Apr 04, 2012 12:25 pm
- Forum: For New Members
- Topic: How to setup your wifi attachment
- Replies: 216
- Views: 474196
Re: How to setup your wifi attachment
Hi, also having some problems here..
I could not get "true" values at Associated, auenticated and DHCP, so after many tries pushed teh option "restore factory settings" . Same problem , but also the IP shown now is 0.0.0.0:2000
Any advice much appreciated!
Thanks!!
I could not get "true" values at Associated, auenticated and DHCP, so after many tries pushed teh option "restore factory settings" . Same problem , but also the IP shown now is 0.0.0.0:2000
Any advice much appreciated!
Thanks!!
- Wed Apr 04, 2012 10:37 am
- Forum: Apps
- Topic: RAGen v1.2.2 - MUST READ for all RAGen Users
- Replies: 27
- Views: 20296
Re: RAGen v1.2.2 - MUST READ for all RAGen Users
Going there..
Thanks!!
Thanks!!
- Wed Apr 04, 2012 10:11 am
- Forum: Apps
- Topic: RAGen v1.2.2 - MUST READ for all RAGen Users
- Replies: 27
- Views: 20296
Re: RAGen v1.2.2 - MUST READ for all RAGen Users
It worked, thanks!!
What should I do next? (I want to install the wifi adapter and teh Client 2.2)
thanks again
What should I do next? (I want to install the wifi adapter and teh Client 2.2)
thanks again
- Wed Apr 04, 2012 9:59 am
- Forum: Apps
- Topic: RAGen v1.2.2 - MUST READ for all RAGen Users
- Replies: 27
- Views: 20296
Re: RAGen v1.2.2 - MUST READ for all RAGen Users
Hi Roberto,
I stayed with the ones that were already selected by default (wifi, date, simple menu, display images, version menu, display LED PWM)
Thanks!
I stayed with the ones that were already selected by default (wifi, date, simple menu, display images, version menu, display LED PWM)
Thanks!
- Wed Apr 04, 2012 9:42 am
- Forum: Apps
- Topic: RAGen v1.2.2 - MUST READ for all RAGen Users
- Replies: 27
- Views: 20296
Re: RAGen v1.2.2 - MUST READ for all RAGen Users
Hi, I need some advice here... I´m a new user, the controller was received yesterday and conected to two termocouples just to have some readings. i downloaded the recent files from the portal, including this version of RAGen. and also the libraries. The controller ys working and is comunicated with ...