Reef Angel Forum

Oh, now thing are getting interesting... If I turn off expansion relay #2, water leak alarm will go on, stay on and never clear until the rope is unplugged. I'll try with #1 turned off and see if it does the same. We were on a run of 4 days without a bus lock but to be fair it triggered after I plug...

They are both blue.

I'm letting it run with only one module connected now to see if either one of those relays boxes are the issue.

Seems like the RA* controller to me since the relay boxes havent had anything plugged into them to draw power.

We are just talking about the relay box, not the controller?

And this is during the bus lock alarm?

I'm waiting on it to bus lock again, its been about 30 hours so it shouldl happen again today

I'm getting bus lock alarms every 12 to 36 hours and nothing is plugged into the unit. I tried reprogramming it with the webwizard but it still happens randomly. After reboot, I get another 12 to 36 hours before it does it again. These units are brand new and have only had power to them for 3 weeks ...

So I purchased the RA* and a rope leak detector that plugs into the RA* unit. Upon plugging it in, I noticed some very strange behavior. I have included videos. - I can submerge a loop of the rope in my aquarium and it may trigger the alarm after 1 minute or more. - I can also submerge it in my skim...

As for the labels, yes, I did that and nothing shows up. I guess I'll keep trying over time bc whatever bugs we are having with the RA* is preventing me from really using this like I did the RA+. I'll document what I did so far so people who buy it next can follow along. Good to know about the iphon...

So it connects to the web based Uapp - but the labels do not come over and it logs me out every time it gets closed.

The iPhone App does not connect at all. It is the latest version.

Why won't the app see it?

Not sure how to find the port & IP of the RA* but it still sees my local RA+

Yes lol I just don't dont know what to do to make the wizard push code to it & to get my app to see it. My app doesn't seem to see the new controller (still sees the RA+ on the local network). Maybe my port & ip are wrong? Where do I verify? Any setup instructions?? Is always says: Progress:...

Yes via a PC

OK, got the client router and it works BUT I can't find the documentation on how I get my connected Reef Angel Star to take code remotely or stream my settings.

Is there another manual I'm not seeing? What is the process?

Thanks!

D

Thanks for the info! I ordered and will let you know how it works!

please do

Would this work?

https://www.amazon.com/GL-iNet-GL-MT300 ... merReviews

What else do I need to buy to make this cloud compatible?

OK - I can try again with updates. If I set it up via the cloud, can I push code that way, rather than disconnecting my tank and plugging it into my computer? I want to do more with defining functions for "Modes" - like auto water changes, etc. Wonder if a cloud setup would be the most pra...

So I connected to the webwizard from a PC and the com port showed up COM3. When I connect from my mac (to the webwizard) I get this as my com: /dev/cu.usbserial-A90K3CTF Did I miss a step in the setup to make my Mac's com port to recognize? Will I need to buy a PC to make updates to the code? Thanks...

OK - I'll find one. The com port no longer shows on the web wizard.

We'll see if I can get a PC to use over the weekend.

I'll check back.

I have a few questions because I wasn't able to figure this out. My unit only has a constant beeeeeeep w/ red light when plugged in with a black screen. - I use a MAC. Is this OK? - What COM port does the RA* use? - When we talk about uploading it locally, we are talking about using the Arduino App,...

I've been trying on and off over the last few months to get this new RA* running and I may be at my end. I go through the wizard, easy. I compile code, easy. Upload - timeout. Cancel upload, disconnect and reconnect - the thing beeeeeeeeps at me until I unplug it again. Plug it in again and the webw...

Has anyone figured out why the .pkg file will not install on a mac?

download/file.php?id=1588

Just ordered my Star to replace my Plus. Does the new controller allows me to plug an expansion relay box into it without the old expansion hub? Was going to buy the hub to convert my old Plus relay box into an expansion but if its only a $70 difference to get an expansion box, I can sell my old Plu...

I couldn't find an answer anywhere on this but if I buy the Star, would I be able to use my standard relay box from the Plus as an expansion? So rather than the standard 8 I get with both systems, I could upgrade to the star and get 16. May be shooting for the stars here but after this last hurrican...