Reef Angel Forum

Ordered

I've never had an RA+. I started out with the RA*. I did purchase two RA controllers that I was planning on using for another tank. Are the power supplies the same? I've only dabbled in USB but can I build a cable and power it though the USB A ports? https://forum.reefangel.com/viewtopic.php?f=2&...

RA Star micro USB.jpg <heavy sigh> Since I've been using the Cloud Wi-Fi hub, occasionally they get out of sync and I have to cycle the power on both units to get might lights to work properly. So I didn't have to unplug power from the RA* directly, I added a right angle micro USB adapter (pointing...

Need a little electronic help. The micro USB header in my RA* came loose from the board so there no power. It's been a while since been on here and could someone point me to a schematic/pinout/advice so I can get it powered back up. My only concern right now is temperature, as I can't find my backup...

Will do. Figured it was my code and maybe I just didn't notice it before we did this salinity addition. Any thoughts on the power cycling? It's not that big a deal as I'm usually not around when it happens. And.... let me know when you might have time to program the Cloud Hub to control the lights d...

Roberto, I isolated two things with regards to the lights using the PWM16E coding. The cycling of power occurs when the lights are changing states. Whether coming on or going off ramping up is below: cloud:PWM16E05:2745 PWM16E05:2745 cloud:WL1:98 cloud:PWME4:67 PWME4:67 cloud:PWME5:67 PWME5:67 cloud...

Thanks Roberto.

Good Afternoon Roberto, The lights were on dim this morning, unfortunately I didn't have the Cloud hub connected to a computer. The 16ch lights didn't come back on with the power off/on. That said, I think there's progress with the Salinity probe. A note here: I found have to make sure I do a certai...

I uploaded my code via the wizard and and uploaded your code to the cloud Wifi Hub and tried calibrating it. Something(s) didn't go quite right though. Once I uploaded to the RA* via the wizard my lights began shutting off every couple/few minutes or so; it is shutting the power off on each outlet a...

Roberto,

Any updates?

I started from scrath with uninstalling and reinstalling Arduino.

Hub connects automatically again and from your latest code I get.

Uploaded and log: SDK:3.0.0-dev(c0f7b44)/Core:2.5.0=20500000/lwIP:STABLE-2_1_2_RELEASE/glue:1.1/BearSSL:6778687 SPIFFS Initialization...failed File System Formatting Error file open failed file open failed ip:192.168.1.16,mask:255.255.255.0,gw:192.168.1.1 file open failed pm open,type:2 0 file open ...

This is the monitor uploading the original code: SDK:3.0.0-dev(c0f7b44)/Core:2.5.0=20500000/lwIP:STABLE-2_1_2_RELEASE/glue:1.1/BearSSL:6778687 Current version: 1.0.1 0 temperature probe(s) found failed to mount FS *WM: Adding parameter *WM: Cloud Username *WM: Adding parameter *WM: Cloud Password *W...

Once I uploaded the code to it the hub produced that output via the serial monitor and then went dark. As in, the light wasn't on at all, I had to upload the previous code that you posted to get it to respond again. Side note, now the UAPP doesn't work for me now. I get 'Cloud server: Connecting...'...

Yes but I guess I need to confirm something. I uploaded that code to the Cloud Wifi Hub. Was I supposed to upload it to the RA*?

Log below: SDK:3.0.0-dev(c0f7b44)/Core:2.5.0=20500000/lwIP:STABLE-2_1_2_RELEASE/glue:1.1/BearSSL:6778687 scandone state: 0 -> 2 (b0) state: 2 -> 3 (0) state: 3 -> 5 (10) add 0 aid 1 cnt connected with K2GVR, channel 6 dhcp client start... Mounting FS... Failed to mount file system ip:192.168.1.16,ma...

Good evening Roberto, I tried doing all of the steps again and still have the two main issues. 1) Cloud wifi Hub will no longer auto-connect to cloud server if power is disconnected. I have to use a paper clip to enter setup mode. 2) Information from attached salinity module doesn't make sense. - sh...

PM sent.

Ahhh... still learning the functions too and the ReefAngel.Relay.Set() function is a logical TRUE/FALSE. But how do you accomplish the range of port ON that is desired using it? The original goal was on at or below 85 and off at 95. The first condition is met but the second isn't. I added the check ...

Thanks libertyaquarium, I do like streamlined code. Is there an equivalent function for the ReefAngel.Relay.Off?

I would suggest modifying the functions to account for a malfunction of the water level sensor/module combination. if ( ReefAngel.WaterLevel.GetLevel(2) <= 85 && ReefAngel.WaterLevel.GetLevel(2) > 0 ) ReefAngel.Relay.On( Port7 ); if ( ReefAngel.WaterLevel.GetLevel(2) >= 95 || ReefAngel.Water...

Roberto, While I had the serial monitor, I wanted to see why it wouldn't auto connect back to the cloud server when power was removed. Does the inability to open the config file for saving have something to do with it? *WM: DIRECT-6C-HP ENVY 7640 series *WM: -93 *WM: Sent config page *WM: Request re...

I think you only need: if ( ReefAngel.WaterLevel.GetLevel(2) <= 85 ) ReefAngel.Relay.On( Port7 ); if ( ReefAngel.WaterLevel.GetLevel(2) >= 95 ) ReefAngel.Relay.Off( Port7 ); The number in the ReefAngel.WaterLevel.GetLevel() statement would be the number of whatever level sensor your using for the re...

Sure thing. I did the full cal but am only posting from the start (35ppt solution) to the RODI to just putting the probe back into the 35ppt. cloud:PWMD:52 cloud:PWMD2:92 cloud:WL1:96 cloud:T3:768 cloud:PWMD:50 cloud:PWMD2:94 cloud:WL1:93 cloud:T3:766 cloud:CEXP0C:1 Custom Exp calibration CEXP0C:1 c...

This the ATO code that I use does what I think you're looking for. The time functions allow it to be active only twice a day. Hope it helps. // ATO/Water functions - Begin if ( ( hour() == 6 ) && ( minute() >= 45 ) && ( hour() == 6 ) && ( minute() < 48 ) ) { if ( ReefAngel.Wa...

Not sure if this is what you're looking for but I got them so I don't have to unplug my RA*.

https://smile.amazon.com/gp/product/B07 ... UTF8&psc=1

So, I tried calibrating Custom Expansion Module 1 about 5 times from the RA* screen. #1 - First 35ppt then RODI - Calibration value for both was 0. RA* Custom Expansion Module 1 showed 00.-29 <--- that is not a typo. ;) #2 - First RODI then 35ppt - Calibration value for both was 0. Android app showe...

Readings are odd. I put the second probe in the display tank next to the DT probe (which is stable @30.3) and am getting values from 215 to 8; currently averaging 80.

Thoughts?

RA_CustomSettings.h modified. Do I need to upload directly to the Cloud Wifi hub again or will changing the file be sufficient? "ReefAngel.CustomVar[0]=ReefAngel.CustomExpansionValue[0];" added to my loop() Now, I'm sorry but, decimal points, LOL! The old Naval aviator here can translate t...

Code has been uploaded but once finished it it did reconnect to my local Wifi but it seems to be having trouble connecting to the cloud server (Blinking Magenta). I can get it to fully connect with the reset/setup procedure (paper clip) and I can control my lights with the web uapp and the Android a...