Reef Angel Forum

Make sure the temp probe is a DS18B20 the pinout should be (VCC), yellow(DATA) , black(GND). Wire colors will base off probe manufacture. I Will post a picture hopefully that will help!

Glad to hear, I am making an adjustment to the reconnect function for the cloud WIFI attachment once, I have tested it thoroughly I will push it to the server.

I am going through the logs to see if I can an issue. I will let you know

Yes just your normal forum password unencrypted. Case sensitive

Interesting... blinking magenta means issues with the user account. For the username you are using "tngo" all lowercase? And your forum password?

Let's try factory resetting it and see if that makes a difference. To do that you'll hold the ap Reset button while plugging in the power cable.

You are hitting it when it's connected to WiFi and blinking magenta? So it's never turning yellow?

Click on AP Reset while its connected to wifi and that will update the device

For the hub there is a pin hole by the led light, hit that button while it's connected to the Internet and it will update. The Led should turn Yellow and it should work after that. If you have any troubles let me know! The web wizard is only for very early versions of the cloud hub and cloud wifi mo...

For the hub there is a pin hole by the led light, hit that button while it's connected to the Internet and it will update. The Led should turn Yellow and it should work after that. If you have any troubles let me know! The web wizard is only for very early versions of the cloud hub and cloud wifi mo...

Also the username and password should be non encrypted. It's also case sensitive

Hello, have you updated the device yet?

Please clear you cache/cookies

Good to know the next release of the uapp does have an installable app on the android phones and windows desktops.

I believe it will only work if you are using the old wifi attachment. If you don't mind me asking, what features or capabilities do you find better in the Android app compared to the Uapp?

Can you try updating your cloud Wi-Fi attachment I just uploaded a new firmware that should fix the issue.

Hello all, the next update of the Uapp will be released March 1st. A few things have been added that I think most people will be happy with. First now on Menu you will see "Edit Dashboard" this is where you can go in and hide certain parameters on the Parameters page, IO page, and Dimming ...

Try factoring resetting it, then updating the firmware. The manual is here https://reefangel.com/wp-content/upload ... -2.0.1.pdf I'll look through the code to see if i can find the issue.

What color is it blinking? The colors should all be the same as before

I sent you an email

Did you update your code on your Reef Angel and Wifi attachment? It doesn't seem to be sending data to the server.

Yes you can paste your code into the webwizard for your screen and it should compile fine

Hello Andy, make sure you update your code using the new Webwizard on your RAPlus as well. As for the Uapp issue make sure the username and password are left blank and you use the http://forum.reefangel.com/uapp and not https:// . Make sure your public IP address didn't change, as well as your port ...

That is very odd, I had the same issue with my star, where it would download the new firmware and then reboot but never install the new firmware. My issue was the SD Card. Make sure the SD Card is formatted as FAT format.

Check your SD card in your reefangel it probably went bad. If you have a spare one try swapping it out. You can remove it and insert it into your PC and if your PC isn't able to read it then it's definitely gone bad.

It's on the to do list for sure, but I don't believe it is working since the migration happened

sorry for the delay here is the correct code for the cloud wifi attachment! #include <FS.h> #include <ESP8266WiFi.h> #include <PubSubClient.h> #include <DNSServer.h> #include <ESP8266WebServer.h> #include <ESP8266httpUpdate.h> #include <WiFiManager.h> #include <ArduinoJson.h> #include <EEPROM.h> #in...

I just checked, I do see your controller sending dater to the server so that is good, I don't see any mqtt connection from your controller so maybe your password was not encrypted correctly or wasn't updated correctly when uploading using the wizard

Did you update your controller and cloud wifi attachment or Star if you are using that controller?

I've made some progress on the uapp today, before I add the user variables tab I wanted to implement authentication for the non cloud users and add better security overall to the uapp. I'll work on implementation of the user variables next. If you want to test it and check it out it's forum.reefange...