Reef Angel Forum

Okay... So after a bit of a cool down period I tried again. Using Wifi utility: After selecting serial port and clicking Connect I get this message: **ERROR- Please disconnect and reconnect the Reef Angel Wifi Attachment from the USB-TTL cable and try again. Then Using the macro: At first I ran 9600...

This is the macro file. Are you sure you ran it? Did you get the messageboxes at the start and end? Yes. Got the message boxes at the beginning and then again at the end. If I run the macro, The Wifi attachment then has a green and blue light blinking. If I run the Wifi utility, I have a Slow blink...

Do you happen to have a space? If so, you need to use $ instead of space. This is what I get. P.S. Passphrase edited x=0 while x<>121 messagebox 'Start WiFly module configuration' 'Webscan Config Program' ;this macro all sent with 5 msec character delay timeout=10 send '$$$' wait 'CMD' sendln 'fact...

rimai wrote:Do you happen to have a space?
If so, you need to use $ instead of space.

I have an underscore "_" in my SSID

rimai wrote:Did you change the ssid and password?
It is case sensitive.

Yes. SSID and Passphrase changed

Try this: https://forum.reefangel.com/viewtopic.php?f=3&t=4601 Okay.... I installed teraterm, downloaded the zip file, made changes as nessasary, Changed baud rate to 57600, and ran the macro. Macro ran Fine... Everything read “AOK” But now my WiFi attachment has a blinking Blue and Green Light...

Thanks! Will givecit a go....

Just one think... I says trying to connect to router
But I have a slow flashing green LED. That means its
Connected Right? But is trying to connect to router.
Strange

When setting up my Wifi attachment, The Wifi wizard goes thru everything
Everything is true getting IP adress ect. but the bottom line reads....

Trying to connect to your router..........

Okay. Thanks. But Still struggling

Hi Guys

How do I change my Reef Angel wifi address in the Portal

IOS 9 Is heavily flawed!!!! Causes a lot of apps to crash.


Sent from my iPhone using Tapatalk

Cool!!


Sent from my iPhone using Tapatalk

binder wrote:sometimes my wifi module gets "stuck". i just unplug it from my controller and plug it back in and it works fine. doesn't happen all the time, but happens from time to time.

Yip!! Happens to me too!! Just unplug and plug it back in!!


Sent from my iPhone using Tapatalk

Hi Guys!! Love the new App!! Great Work!!! Just one think how does the Graphs work? Mine does not seem to work! Keeps saying connecting to Portal..!


Sent from my iPhone using Tapatalk

Thanks Guys! Will let you know after I connected something!


Sent from my iPhone using Tapatalk

Okay...........! Then what is the retailer going to say when I tell him after 2 months! Hay the HUB does not work....?


Sent from my iPhone using Tapatalk

??????????


Sent from my iPhone using Tapatalk

No! Not yet!


Sent from my iPhone using Tapatalk

Hi guys

I Bought myself an Expansion HUB only for now! Just to soften the hit on the bank balance when I Bye other stuff!

The think is when I plug it in the Little light does not shine! Is this normal?


Sent from my iPhone using Tapatalk

[THUMBS UP SIGN]


Sent from my iPhone using Tapatalk

Nope! Checked that already!


Sent from my iPhone using Tapatalk

Inverted? Meaning?


Sent from my iPhone using Tapatalk

Its connected to the 2 Ports left of the pH probe!


Sent from my iPhone using Tapatalk

It does not work! It works kinda viceversa! When the level is low the relay switches off, when high it switches on! The ATO also keeps Timming out!


Sent from my iPhone using Tapatalk

Okay! But do you make sense of my description?


Sent from my iPhone using Tapatalk

How about now?






Sent from my iPhone using Tapatalk

They are Installed next to each other! The one higher than the other! With the wires pointing upwards! Hope that makes sense!


Sent from my iPhone using Tapatalk

Why?


Sent from my iPhone using Tapatalk

Hi Guys! Still Strugling here! Here is a PIC of how my floats are installed http://img.tapatalk.com/d/14/06/03/uretumeh.jpg http://img.tapatalk.com/d/14/06/03/gubu4y7y.jpg So I want the lower one (ATOLow) to Control the level and the higher one (ATOHigh) for fail safe if something should happen to t...

Thanx Roberto!


Sent from my iPhone using Tapatalk