Reef Angel Forum

YES YES YES YES YES YES :D :D :D :D :D :D :D It works! I had an old USB cable and 2k resistors that I used to make my own cable. Thank you very much for your patience Roberto (I know I'm an idiot programing :oops: ) and for your help it was very appreciated. You're very helpful I love the Reef Angel...

This is the cable

Ok now I understand why it does not work. After my Google search I know how to connect the UNO for use I2C protocol with pins A4 and A5 for SDA and SCL. But with the RA I dont know what pins it should be use. Can I use the USB cable supplied with the RA and plug in to the relay box? If I can use thi...

Yeah this code works in the Reef Angel and I see in the screen when the port it is opened and closed. But I think the Uno does not receive the order of ReefAngel, cause I have no signal on the UNO pin. I wonder if I correctly connect the Uno to RA. I connect the Uno with Usb port of the relay box. D...

it does not work, when I try to uploaded I got this message. expected `)' before ':' token The following features were automatically added: Watchdog Timer Version Menu The following features were detected: Dimming Expansion Module Dimming Signal Custom Main Screen Standard Menu RA_OSAKA_test_ino.cpp...

Excuse my ignorance because I do not know really anything programing and English is not my first language.

But I love this controller for its infinite possibility (I'd really like to understand the programing )

Thank
Eric

Yes it works,

Now how to repeat a command with the ''PWM module'' like a dosing pump? Ex: run 15 sec every hours

Thank you so much
Eric

I put the code of PWM module in the uno and the upload has run. :D I used the wizard for generated my RA code Here is the code #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include <Wire.h> #include <OneWire.h> #include <Time.h> #include <DS1307RTC.h> #include <InternalE...

Wow

Thank you I can not wait to try it.

I will keep you posted.

Thank you very much for your support I would not have this good service with another controller.

Eric

http://forum.reefangel.com/viewtopic.php?p=12569#p12569 thank you, :D I use this to set the uno, and I use the code pwm expansion module for RA? Then I set the Uno with the version of arduino I usually use for RA? (normally I use the arduino wizard) or should I download it directly from arduino? Th...

Hi everyone, I would like to use a arduino uno for control 4 relay to operate my dosing pumps with pin 2,4,7,8 I want that the RA talk to the arduino uno in single way, maste/slave. Unfortunately I'm not very good in programing, but I am very confident with electronic circuits. So I would like to ha...

Oh man... I feel really stupid :oops: I believed that the jumper normal position is on the far right most pins. I gave it a good position and everything works fine. :D Sorry for this stupid mistake. Thank you very much for your support Roberto, there is no controller that is after sales service as e...

Ok, this is how I set the jumper when the error began.

Thereafter I handed the jumper to the normal position and I make all test, did not work.

Having put a jumper in the wrong position, can i have damage the RA ?

I tried different connection, RA +, RA and RA with optiboot and nothing works. I really have no idea why nothing works. I'll keep trying, do you think a bad instalation jumper may have caused this problem? Here is a picture how I had installed the jumper and the unit message ImageUploadedByTapatalk1...

what is the difference for the cable connection between the RA and RA+ ?
I'll check (but I'm sure it is a standard RA)

I uninstall the software and reinstall it still not working. I even used another computer and I still have same problem.

I use the second generation of RA, I bought it new in the box from another person who had never used. I use it since February 2012 with success.

Thank

This is a uploading error The following features were automatically added: Watchdog Timer Version Menu The following features were detected: Simple Menu Taille binaire du croquis : 6 812 octets (d'un max de 32 256 octets) C:\Program Files\Reef Angel Controller\hardware/tools/avr/bin/avrdude -CC:\Pro...

rimai wrote:Ok, it's not downloading.. It's uploading... That's why I was confused.
Can you copy and paste the error log in red??

Oh sorry for that it's my error

Yes i Will copy the error log.

This is the code #include <InternalEEPROM.h> #include <ReefAngel_Features.h> #include <Globals.h> #include <Time.h> #include < OneWire .h> #include <RA_NokiaLCD.h> #include <avr/pgmspace.h> #include <InternalEEPROM.h> #include < Wire .h> #include <Memory.h> RA_NokiaLCD e; void setup () {     e. Init...

Yes i will tried when I get home
Thank for your fast answer
Eric

Yes i tried this but Arduino message is "downloading error" no code error.

Thank

Hi, I add a relay expansion box and I created a new code with the new wizard. I uploaded the new code but I had forgotten to change the jumper. When I change the jumper to pins SDA and SCL the controller unit was telling me ''no internal memory found'' After doing some research on the forum I tried ...

Ok it's work fine...the problem was my interpretation When i tested, the Ph in my tank indicate 7.8 and the Ph control is on 7.5 and off 8.0 my port is On, cause my ph is 7.8 (i was thinking is Off) i have try with different value like on 7.5 and off 7.7 and its work, my port is off cause my ph is 7...

What version of libs are you using? On v0.9.9, you can use: ReefAngel.PHControl( Port1,750,800); I try this for test and not work, I have libs v0.9.9 This is my code generate with de wizard and mod for PH control, sorry i'm very newbie to make a code ;) #include <ReefAngel_Features.h> #include <Glo...

Wow!!!

You never sleep Roberto?

Thank you very much i will try this (tup)

Hi, I would like to Know if is possible to control one port with a pH value??

Exemple: pH under 7,5 air pump On
pH 8 air pump Off

Thank for you help

CASPAR wrote:Updated to v1.04 and everything seems to be working fine now, will keep ya posted. Thanks Roberto!

Yess it's work!!

I love the new wizard it's "friendly user"

Thank you Roberto

Hi Roberto,

I use the new Wizard to generate my code (great job it's very simple) but i set port 1-2-3-4-5-6-7 always on/off in feed mode and port 8 for my dosing pump.

After transfert in my ReefAngel, i realize all port is off exept dosing pump (i'm not in feed mode)

Do you have any idea??

Thank

Sebyte thank you for the concept. In fact I need to control four aditional relay 12vdc to operate in four DiY dosing pump. In searching the net I find a USB control board that operates the relay with a PC. This is a description: sorry i cannot put this link URMC4 4 Channel USB Relay Module is great...

Sebyte thank you for the concept. In fact I need to control four aditional relay 12vdc to operate in four DiY dosing pump. In searching the net I find a USB control board that operates the relay with a PC. This is a description: sorry i cannot put this link URMC4 4 Channel USB Relay Module is great ...