Reef Angel Forum

Rimai, I used the wizard to create the code. Would this matter?

The issue I'm having with Android and Universal app on S4 the override function for the dimming does not work correctly. Here is an example: when I try to change the % of PWM for channel 3, it changes it for Channel 1 and when I change channel 1 nothing happens. Any ideas of what to do?

So I did the config with the wifi utility tool and the lights is just blinking green. Here is the code: Opening Serial Port... Verifying speed at 9600 baud Connected to serial port COM4 > $$$ > set u b 57600 > set s p 0 > save > reboot Opening Serial Port... Verifying speed at 9600 baud Removing con...

Ok I removed the ' in the SSID and ran the Macro fix in Tera Term; but the lights are blinking blue. Here is the code Marco that was config to my Wifi: CMD factory RESET Set Factory Defaults <4.41> reboot *Reboot*CMD set ftp address 198.175.253.161 AOK <4.41> save Storing in config <4.41> set wlan s...

I tried the Wifi setup again this is the code I get (many errors): Verifying speed at 9600 baud Connected to serial port COM4 > $$$ > set u b 57600 > set s p 0 > save > reboot Verifying speed at 57600 baud Removing connection to COM4 Connected to serial port COM4 > $$$ < CMD Wifi is communicating at...

Thanks LeoD, I was able to connect last night. Just need to have the cable connect before opening the program. I will send a copy of 'get everthing' when I get home later tonight.

I was able to use Tera Term to set my baud rate at 57600 and follow the rest of the Wifi manual set-up, but all my LED are flashing. So I try the utility set again some maybe to note: when I look at my code my SSid=WiFly-GSX-4a??? This is not what I enter? I believe it is the RA Wifi attachment SSid...

LeoD, When I attach USB cable - Wifi attachment and I enter $$$ to start to confr with Tera Term program, nothing happens, just a blank screen.
Troy

I need help troubleshooting my Wifi attachment. It was working and then it stopped and all the lights are blinking. I tried to the setup tool and and the attachment "sees" my router, by it does not connect to the internet. I try to update the firmware and I get an error (not able to connec...

Update - back up and running. Thanks for the support!

Ok - at work now but will change later tonight. Thanks everyone for the help. For my education, did I cause this? or did the RA wizard generated the error?

Here is what the RA wizard generated: #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include <Wire.h> #include <OneWire.h> #include <Time.h> #include <DS1307RTC.h> #include <InternalEEPROM.h> #include <RA_NokiaLCD.h> #include <RA_ATO.h> #include <RA_Joystick.h> #include <...

Ok, I just went ahead and ran the RA wizard again. Now I'm getting error when I try to upload to the controller I copied what was at the bottom of the RA wizard: The following features were detected: Wifi Attachment 2014 Main Screen Extra Font - Medium Size (8x8 pixels) pH Expansion Module Water Lev...

I will check the code in a few hours, when I get home. One thing I did notice during the Wifi device set-up is that I never receive the message – Now forwarding to IP XXX.XXX.XXX.XXX. I remember that I received this message during the set-up last year. Does this mean anything?

Ok if I check IP 65.30.20.XXX:2000 that is on my portal page, the port is closed. When I type in my internet provider IP address, it is open.... Boy I do not have a strong grasp on port forwarding. Ok, I used a router detector and it only one is listed. How can I check if my modem (Motorola) is as a...

Not at home right now, so I can not check code. But will later today.

I did not change the the code. When I open the portal this is what comes up: Reef Angel wifi address: 65.30.20.XXX:2000 (I hid the address) My reefangelid: HodagReef Connection Status: Unreachable Address Last Update: 8/15/2014 3:52:21 AM Displaying data from:Webbanner databas As you see, my set up ...

yes the light was blinking green

I get this when I open the portal Connection Status: Unreachable Address. - I used the Wifi Utility to set up the Wifi device - received IP address from router - made that IP address static in the router and port forward (2000) that same IP address. - checked the port 2000 on using http://ping.eu/po...

Do not know where to start, but here it is: I have read many of the forum post and worked with my internet provider and router company to get 2000 port opened. It now open, good. I run the the Wifi set up and get an IP address (static) from the router. Open web browser and enter http://192.168.1.XXX...

juszczyk,

Did you get your set-up to work? I'm thinking of doing something similar.

Rimai - back from holiday and had a chance to look at few more things. What I found was my setup of Dynamic DNS service was not working.. My password in the router was work. It's back working.

Hello, Hoping someone can help. My Wifi worked for two month and now it stopped working. I worked through some of the fixes in the forum with little luck. I have the attachment blinking green, but I get the Port 2000 to only forwarded to 0.0.0.0 Here is the code from the WiFi Utility (miss my real S...

Roberto - good stuff... So I l can measure up to 15.7 inches of water and the pressure sensor can handle up to 64 inches. My plan should work.
Thanks.
Troy

How long can the PVC tube be or better question what is the capability of the level module to measure (min/max) inches of water? Also, I will have this set-up as an attachment to a poly vessel that will be my sump that my return pump is attached to. It is here I will maintain level, but I’m worried ...

Rimai - a reply to an old post, but trying to figure out the cabling for PWM signal. Would it be ok to run 25 ft of RJ-45 or CAT5? My plan is to control LDD drives from your PWM expansion.

rimai, thanks for your replies. It’s not hard to figure out that electrical engineering is not my background. So excuse my questions if they’re totally noobish. I do have few other questions relating to the temp probe – Have you consider making an expansion module for temp probes? How long of a cabl...

rimai, what is the maxi amount of probes one should considers splicing into a cable?

Thanks Rimai. What kind of mods would be needed? Has anybody else done this? I was thinking to use temp sensors to shut down LED (100w multichip) if the temp was too high (fan failure) by turn down the light and/or shutting off the relay outlet. Other option is to use a temp cutoff switch (12 v DC) ...

How many temperature sensors can the RA handle? I was hoping I could have 6 temperature sensors. Three are for thermal protection of my DIY LED pedants.
Thanks,
Troy