Reef Angel Forum

It might have something to do with the Cloud Hub. I had that plugged into the laptop earlier today. I unplugged it before uploading the most recent time and it took. I'll test that out more later this weekend.

I plugged in to the RA* via USB cable and uploaded that way and it took.

No luck there. The old card reads/writes fine on the laptop. Also tried a new card. Still sounds like it's updating but it's not taking the code.

I'm running into an odd problem this morning and can't figure out what I'm doing wrong. I've uploaded new code via Remote Upload from the Wizard. I've done this a dozen or more times this morning trying to get something working. After a little testing, I think my new code is not actually making it t...

Got it. Thank you.

Is this still supported after the server migration?

It's the same on my work computer. I'm betting it has never been there and I just didn't notice it until last night. On my work laptop, I can scroll with the mouse and never had an issue. It wasn't until last night when I was trying to use the stupid trackpad without a scrolling mouse at home. That ...

Is it just me or is the scroll bar gone on the Uapp? When I use the app on a desktop, Chrome or Edge, the scroll bar is missing. Other browser tabs have scroll bars. I have to use the arrow down or tab keys to scroll down the page. I don't know if this is something wrong on my end or not. I will hav...

It’s been 6 months or better since I tried box 2. I’ll switch box 3 back to 2 this weekend and see how it goes.

I forgot all about the cloud hub having two IO ports!

I would absolutely love to be able to log and track custom variables. i.e. water test results. That would be nice to have all in one place. Another thing I would really like is to be able to remove a relay box from view. I had a problem with Box 2 going haywire on me and not toggling the relays spor...

In theory, if you go by what's compatible with the Jebao Apex adapter, any of the Jebao WP, RP, PP, FS, SW series wavemakers *should* work. I have not testing anything other than the WP myself.

It must have been solar flares. I got home last night and all the lights were on except for the one I left unplugged. I plugged that one back in and no problems for the remainder of the night. I've been watching the camera throughout the day today and they're still all on. Very strange... ~Charlie

I think I need to recheck my lights when I get home tonight. I'm looking at my web cam right now and the lights are on. I'm pretty sure that I left one light unplugged last night. If that doesn't work I still have a couple of the old style boxes I can throw up there to test with.

I think my universal relay expansion box might be going out. Last night I got home from work and all my lights and powerheads were off on the tank. They're all plugged into the 2nd relay box on top of the canopy. I noticed the switch was off so I reset the breaker/switch on the box and everything ca...

Try using hour() instead of now(). //Fuge Light on 1 hour before sunset and off 1 hour after sunrise if (hour() >= (InternalMemory.StdLightsOnHour_read() - 1) && hour() <= (InternalMemory.StdLightsOffHour_read() + 1)) { ReefAngel.Relay.On(Port6); } else { ReefAngel.Relay.Off(Port6); } This c...

....but those that mean that the web wizard cannot be used to edit an existing program? I'm not exactly sure what you're asking here. As long as you saved your original code you can load it back into the web wizard and edit it. In the top left corner of the wizard you will see a menu button. That m...

As long as you saved your code when you originally programmed it you will be able to reload that into the Web Wizard to edit. You can’t download the code from the head unit though.

I updated/loaded my code Thursday night. I’m now able to use my expansion hug again and most of my expansions that I had to previously ditched because of the bus locks. The one exception is my dimming expansion. It continuously locks the bus on me. I have enough dimming ports on the head unit so it’...

This sounds promising! I will update my code and upload tonight and see if that helps. I sure hope this does the trick!

Thanks, Curt! I have a couple more things I want to try first but if they don't pan out for me I'll dig back into this one.

I would also recommend trying lower pull-up resistor values for people having bus lock issues with the Reef Angel itself, although refitting a Reef Angel with a different resistor would be a little bit tricky. You could maybe bodge something on to the USB port itself. You don't have to remove the e...

Any word on the code to reboot the RA*? I'm having the same issues. I have the * set up on a wifi smart plug re-booting every few hours now but would like to do it in the code if possible.

Is there a way to disable the "screen saver" or sleep mode on the RA*? I'm having a problem with relays randomly getting stuck on/off. I'll wake up in the wee hours of the morning to find that my actinics never turned off and my heater stuck on or off. The graph on my temp probe looks more...

The specs show that it's a 9v DC pump. Get yourself a 9v DC wall wart and 5.5mm x 2.1mm Adapter. Wire that together (observing polarity) and plug that into a port on your relay box. Wall Wart: https://www.amazon.com/dp/B014F7ZIEQ/ Adapter: https://www.amazon.com/dp/B011YKCK5M/ Looking at the pic in ...

Mayur wrote: For 5 and 6th probe
It will be

ReefAngel.CustomVar[0]=ReefAngel.Params.Temp[5];
ReefAngel.CustomVar[0]=ReefAngel.Params.Temp[6];

You would want to use this:

Try changing this section: if (hour()>=1000 && hour()<=2100) // Day mode between 10:00am and 9:00pm { ReefAngel.DCPump.UseMemory = false; ReefAngel.DCPump.SetMode( LongPulse,100,25 ); } else if (hour()>=2101 || hour()<=959) // Night mode between 9:01pm and 9:59am { ReefAngel.DCPump.UseMemory...

Thanks, Roberto. It's compiling fine now.

Thanks, Roberto!

I'm trying to upload new code using the Web Wizard and I keep getting this error. Everything was working fine last week. Am I doing something wrong here? Error message: Compiling code for RA_PLUS board Number of Relay Expansion Modules: 1 Relay Expansion Module Dimming Expansion Module Dimming Signa...

Bummer. Not what I was hoping to hear :/