Can we do something about that? I know on the cloud hub I have a TempProbeIDs[]={ 5, 4 }; I don't know why I re-ordered them but what can we do to make this more static or override when needed.
I just had to replace my probes and the 10' one which was my Display is now T3. Quite annoying
Search found 4253 matches
- Thu Mar 25, 2021 3:15 pm
- Forum: Standard
- Topic: temperature probe problem
- Replies: 6
- Views: 5127
- Tue Feb 04, 2020 8:46 am
- Forum: Apps
- Topic: macOS Catalina (10.15) and Arduino
- Replies: 1
- Views: 3162
Re: macOS Catalina (10.15) and Arduino
Interesting problem. I've been able to use mostly the web wizard lately, but also because all my contribs have been merged. I would definitely need to maintain compatibility if I were to do any Library changes in the future. You're talking about just managing the ReefAngelFeatures.h ? That could be ...
- Fri Oct 25, 2019 6:39 pm
- Forum: Development Libraries
- Topic: Star and multi-water level support
- Replies: 2
- Views: 9208
Re: Star and multi-water level support
ReefAngel.AddMultiChannelWaterLevelExpansion(); // MultiChannelWaterLevelExpansion
That should take care of it
That should take care of it
- Fri Jul 12, 2019 4:37 pm
- Forum: Standard
- Topic: Unexpected end of stream
- Replies: 25
- Views: 19964
Re: Unexpected end of stream
There is no forwarding in the "Home" network. Forwarding is to get you from your router to the RA inside your network. The portal gets updated because the RA makes an *outgoing* connection to the portal every 5 minutes, but you cannot connect internally to a device (RA) behind your firewal...
- Thu Jul 11, 2019 5:25 pm
- Forum: Standard
- Topic: Unexpected end of stream
- Replies: 25
- Views: 19964
Re: Unexpected end of stream
I agree 100%
- Mon Jun 24, 2019 5:54 pm
- Forum: Standard
- Topic: Unexpected end of stream
- Replies: 25
- Views: 19964
Re: Unexpected end of stream
Ok well at least you know that it's working now. So the app is working properly now?
Did you re-setup the port forwarding? It sounded like you went from .2 to .8 or vice-versa. The port-forwarding needs to match that.
Apologies for any miscommunication.
Did you re-setup the port forwarding? It sounded like you went from .2 to .8 or vice-versa. The port-forwarding needs to match that.
Apologies for any miscommunication.
- Sat Jun 22, 2019 5:42 pm
- Forum: Standard
- Topic: Unexpected end of stream
- Replies: 25
- Views: 19964
Re: Unexpected end of stream
You need to set it static on your router. If you aren't using cloud wifi or star then it's not going to work with your port forwarding..
- Mon May 20, 2019 6:21 pm
- Forum: Apps
- Topic: U-App Repo
- Replies: 32
- Views: 24424
Re: U-App Repo
Thanks that helped. I had to delete and recreate the bookmark (I think) on my phone. Will try a different way next time.
- Mon May 20, 2019 4:07 pm
- Forum: Apps
- Topic: U-App Repo
- Replies: 32
- Views: 24424
Re: U-App Repo
Is there an easy way to confirm if I have your version @sbidny?
- Thu May 16, 2019 6:47 pm
- Forum: Apps
- Topic: U-App Repo
- Replies: 32
- Views: 24424
Re: U-App Repo
Trickling in more updates: Plan to target the timeout issues when you try to update values to their same value next. Similar issue with the relays if they reset. For instance, If i override a port on and my code put's it back to auto but then starts a timer or calls another function, you'll get the...
- Thu Apr 11, 2019 8:58 pm
- Forum: Apps
- Topic: U-App Repo
- Replies: 32
- Views: 24424
Re: U-App Repo
Great to see some work going on to improve the U-App. Nice updates, I hope to see them merged soon! For the retry, it's super-frustrating that if my screen locks and I open the phone back right to the u-app, it loses the connection to the cloud and issuing any relay commands time-out. I then have to...
- Fri Apr 05, 2019 7:09 pm
- Forum: How do I code ...
- Topic: Can i turn on/off a port based on water level?
- Replies: 17
- Views: 12454
Re: Can i turn on/off a port based on water level?
= is an assignment not a comparison. So here you are trying to set a function to equal 0. = by itself is used to set the value of a variable int i = 4; for example. What you want is to use a comparison, is it equal to which is represented by == alternatively if you ever need, you can use != along wi...
- Fri Apr 05, 2019 7:07 pm
- Forum: How do I code ...
- Topic: How do i code in a 2nd ph probe
- Replies: 4
- Views: 4980
Re: How do i code in a 2nd ph probe
CO2Control uses the regular PH probe as a default, but you can also use the expansion by passing an extra argument.
ReefAngel.CO2Control( Box1_Port7,750,770, true );
ReefAngel.CO2Control( Box1_Port7,750,770, true );
- Wed Apr 03, 2019 4:47 pm
- Forum: Addons
- Topic: 2nd PH probe?
- Replies: 3
- Views: 4758
Re: 2nd PH probe?
Yes, should be fine with the phExpansion.
- Wed Apr 03, 2019 4:46 pm
- Forum: Standard
- Topic: New temp probe not working
- Replies: 5
- Views: 5699
Re: New temp probe now working
Did you reboot after installing it? You could try it in a different port if any difference. Also the temp probes have a digital serial number and the order the probes appear is determined by that. So the new one wont' necessary be T2... You may also need to try one at a time. Either way, it isn't re...
- Wed Apr 03, 2019 4:45 pm
- Forum: How do I code ...
- Topic: Can i turn on/off a port based on water level?
- Replies: 17
- Views: 12454
Re: Can i turn on/off a port based on water level?
DelayedOn only works after reboot, feeding mode or waterchange mode. What you want to do is set the relay override which you can do with ReefAngel.Relay.Override(Port7, false); That will turn the relay on definitively. However it won't go back on unless you do it manually or add additional logic to ...
- Tue Mar 19, 2019 7:05 pm
- Forum: How do I code ...
- Topic: Can i turn on/off a port based on water level?
- Replies: 17
- Views: 12454
Re: Can i turn on/off a port based on water level?
Yes. The && is a way of sending AND. So if both conditions are true (number between and inclusive 10-85) then Port 7 will get set to true which will be on. If either of those conditions is not true, (if it's 86 or higher or 9 or less) then the port will get set to false which will then be of...
- Sun Mar 10, 2019 10:24 am
- Forum: How do I code ...
- Topic: Ph Probe reading not right
- Replies: 9
- Views: 7138
Re: Ph Probe reading not right
It can also be voltage leaking from float switches. It's sometimes a very difficult issue to diagnose, but there is some component in the tank that is interfering.
- Sun Mar 10, 2019 10:14 am
- Forum: Addons
- Topic: Dimming to zero
- Replies: 5
- Views: 5549
Re: Dimming to zero
Agreed with what binder said. Many drivers do not power off at 0 and you will have to put some code to say when it's below x % cut the power to the led.
- Thu Mar 07, 2019 3:10 pm
- Forum: How do I code ...
- Topic: Ph Probe reading not right
- Replies: 9
- Views: 7138
Re: Ph Probe reading not right
Sounds like stray voltage then
- Thu Mar 07, 2019 12:41 pm
- Forum: How do I code ...
- Topic: Ph Probe reading not right
- Replies: 9
- Views: 7138
Re: Ph Probe reading not right
Do the calibration also without hitting ok but seeing what value it gives you when the probe is still in the tank. A lot of things could impact the probe readings. Proximity to other probes/heaters/etc. stray voltage, bad ground, etc.
- Tue Mar 05, 2019 8:00 pm
- Forum: Standard
- Topic: Broken knob
- Replies: 4
- Views: 6800
Re: Broken knob
Maybe try something like this? https://www.adafruit.com/product/512?gclid=CjwKCAiA2fjjBRAjEiwAuewS_fN_d2XembuFo90Ksl63E7hWxpyuu2XSxHHOgzWXqSZP4Sjcpz5jEBoCRuQQAvD_BwE or from these https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=arduino+joystick+knobs&_sacat=0&LH_Tit...
- Sat Feb 16, 2019 8:30 am
- Forum: Standard
- Topic: Unable to upload code from Mac to RA+ after using USB power
- Replies: 3
- Views: 6012
Re: Unable to upload code from Mac to RA+ after using USB po
You definitely need the right cable. The RA does not get power from that port, just serial. You should contact Roberto for a replacement. The ones I see on ebay have usb serial dongles attached which I don't think is necessary. Your other alternative is to upgrade to the RA Cloud Wifi module if they...
- Sat Feb 16, 2019 8:27 am
- Forum: How do I code ...
- Topic: Feed Mode for powerhead on 2nd Relay Box
- Replies: 3
- Views: 4197
Re: Feed Mode for powerhead on 2nd Relay Box
Yes, exactly. Each variable controls one relay box. In each one you need to set the bits you want on/off.
- Fri Feb 15, 2019 10:42 pm
- Forum: How do I code ...
- Topic: Feed Mode for powerhead on 2nd Relay Box
- Replies: 3
- Views: 4197
Re: Feed Mode for powerhead on 2nd Relay Box
Set this to whatever PortX_Bit you need // Ports toggled in Feeding Mode ReefAngel.FeedingModePorts = Port5Bit | Port6Bit | Port8Bit; ReefAngel.FeedingModePortsE[0] = Port6Bit; ReefAngel.FeedingModePortsE[1] = 0; // Ports toggled in Water Change Mode ReefAngel.WaterChangePorts = Port1Bit | Port5Bit ...
- Tue Feb 12, 2019 6:11 pm
- Forum: Addons
- Topic: DC Pumps that work with RA
- Replies: 38
- Views: 42670
Re: DC Pumps that work with RA
Did you try using the Daylight/Actinic PWM ports on the relay box if you have an older RA or a bigger stretch of a solution would be getting a STAR and using the builtin PWM on the unit and separating the lights from the pump. One on the dimming module and the other on the builtin
- Mon Jan 07, 2019 10:28 pm
- Forum: Apps
- Topic: UApp Error - Nothing to update
- Replies: 20
- Views: 16133
Re: UApp Error - Nothing to update
Odd. let's see what Roberto has to say. Sorry about the wrong numbers.
- Mon Jan 07, 2019 7:24 pm
- Forum: Apps
- Topic: UApp Error - Nothing to update
- Replies: 20
- Views: 16133
Re: UApp Error - Nothing to update
Have you tried in the portal? https://forum.reefangel.com/portal.php ?
- Mon Jan 07, 2019 7:23 pm
- Forum: Apps
- Topic: UApp Error - Nothing to update
- Replies: 20
- Views: 16133
Re: UApp Error - Nothing to update
Are you sure your Uapp is working properly? You have no portal key setup? or it's configured if you have one?
- Mon Jan 07, 2019 10:49 am
- Forum: Apps
- Topic: UApp Error - Nothing to update
- Replies: 20
- Views: 16133
Re: UApp Error - Nothing to update
Try to set them manually to something through the web interface http://your.ip.address:2000/mb244,8 // Set StdLightsOnHour to 8am http://your.ip.address:2000/mb245,30 // Set StdLightsOnMinute to 30 minutes http://your.ip.address:2000/mb246,20 // Set StdLightsOnHour to 8pm http://your.ip.address:2000...