Reef Angel Forum

Is it possible to make the ReefAngel.UseFlexiblePhCalibration(); work for the ph expansion?

I have 1.0.7 and the power control expansion is not in there under example codes. That going to be soon?

Awesome, so i'm going to hook up my lunar module and my dimming module to it. That will save a lot of space for this bulky power supply boxes.

You know what would have been really cool and I'm not sure if this is possible. If the Power Control Expansion could run all the other add-ons (PH, Lunar Lights, dimming exp, etc). But it looks like those need 1amp and this only puts out 500ma per channel.

Thanks so much guys, that did it. That code was just left from copying somebody's elses code from the forum. I'm so glad that no matter what issue I have with this reef angel it can be fixed fast.

Yeah, the PH expansion is going to my Calcium Reactor and it is showing 7.72 now

Yeah, I can turn off/on port 2 with my phone just fine. I used to have port 2 configured for C02 with the regular PH from the controller.

Well the PH is 7.22 right now and port 2 is not on.

Is there something wrong with my code. I changed it today for my PH expansion to handle my calcium reactor and I can't get it to work right off of my PH Expansion. Here is my code: #define WDT #define NUMBERS_8x16 #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include <Wi...

I used this last night and it worked great.

Is it necessary to calibrate the PH probe to 4-7 instead of the 7-10 calibration if you use the probe in a calcium reactor?

I replaced the old cable last night in panic because I needed to get stuff working before I went to bed and it all worked. Soooooo....I need to get a black cable. Do you think this would work? http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10201&cs_id=1020108&p_id=6370&...

No, I replaced it with a black one that I had. Should I put the original one back on?

To be more specific here is my results from testing each port with my mutlimeter:
Port 1 - 120
Port 2 - 1.5
Port 3 - 120
Port 4 - 1.6
Port 5 - 120
Port 6 - 0
Port 7 - 1
Port 8 - 120

Yeah, I went through all the ports and 3 of them posted really low voltage. The rest of them posted like 119 AC voltage on my tester. I opened the box to see if anything looked wrong but everything is clean and nothing looks bad at all.

I tested with the controller test code and some of them test and 119volts and some test and 1 or 5.

I noticed some of my heaters were not working on my relay box. I broke out my multimeter and I am only gett 2.5 AC from my ports. I checked the current going in to the relay box and I am getting 120 AC current. Any ideas?

I got the PH Expansion today and set it up but whether I use the probe that came with the unit that is working fine or the new probe in to the expansion unit it reads 1 point high.

I'm sorry if this is documented somewhere but I can't seem to find it no matter what I search. I have found some mentions of running leds off of the add on dimmer but I can't find out if the led's from rapidled would work. I added 4 moonlight led's to my rapidled heatsinks for moonlights and then I ...

Thanks Roberto, you are awesome.

In the code it's pulling the CWLED and RBLED values from the built on dimming circuits. I want to pull channel 0 and 1 from the add on PWM dimming controller instead.

I want to use the custom main screen that was made but I want to pull channel 0 and 1 off of the PWM add on. #define VersionMenu #define DisplayLEDPWM #define wifi #define WDT #define SIMPLE_MENU #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include <Wire.h> #include <On...

DrewPalmer I want to use the display screen you setup, but I can't figure out how to put in values from the dimming add on box. The code from the dimming add on box has this code: // Dimming Expansion x = 15; y = 2; for ( int a=0;a<6;a++ ) { if ( a>2 ) x = 75; if ( a==3 ) y = 2; ReefAngel.LCD.DrawTe...

I'll give that a shot.

All I have is this under my void loop:

ReefAngel.CO2Control( Port8,654,647 );

Is it possible to make my Co2 port turn off at 6.45 and then turn back on at 6.6? I have it set right now and everytime the PH get's down to 6.45 it keeps turning off and on constantly as it is jumping back and forth between 6.45 and 6.46.

Ok, I think I figured it out. I guess the starting of 15 also ends at 15. I thought that after the end time it would go to 0 and turn them off.

I just measured them both and they both show 1.5 DC.

What is wrong with my code. I generated this from the wizard. It's 10:45PM and My Channel 0 and Channel 1 are at full strength but the Reef Angel LCD shows them at 15%. } void loop() { ReefAngel.StandardHeater( Port1,740,770 ); ReefAngel.StandardLights( Port2,23,0,10,0 ); ReefAngel.StandardFan( Port...