Reef Angel Forum

roberto are you talking about the onyx? if so it doesnt look like that is dimmable........unless you have some intel about whats to come thats great to know about the appollo i had ruled that out last night but its back in the running since it will work with my system

i have a aquastyle kit with pots on my wifes 20 gallon zoa tank and the steves kit on my tank i really wanna switch to a already built fixture. they have a cleaner look i just wish since i just bought the pwm expansion to utilize it. the 3 im considering are in the $300 price range right now im betw...

sorry if this is a dumb question but i currently have a steves led diy kit and i hate it i have been trying to make it better by constantly tweaking it but it never is even or consistent in color or brightness. so i have been considering buying a cheaper led fixture buy 90% of them have potentiomete...

This is like what happens to mine we are trying something now do you have the wifi attachment

ok well its still connected and relays are still working the correct way(still not alot hooked up to it. with the rf it has a green light on it which is (im pretty sure) how i programed it on the wizard. if i change the mode on the mp10 controller the light on the ra module stays the same is that co...

ok i have the rf module on (not 100% sure its connected to the mp10), but its plugged into the hub and lit up yellow

war pig thats what i thought when i first got the rf module thats why i just disconnected it and said no biggie but when i got the dimming expansion and it did the same thing i ruled it down to the wifi i still need to buy the cable to hook up the rf module i will make that happen......

it happens if i have more than to addons plugged into to usb hub and wifi is trying to connect first i had usb with salinty and wifi everything was fine then i added th rf and salinity with wifi it would go crazy i assumed it was the rf module so just left it disconnect then i did a full spectrum le...

any update for me... i havent hooked up rf because i would be able to control my mp10w without wifi and if i hook wifi module in with 30 mins its offline and my tank is going crazy

i dont have the rf hooked(need to go buy a new usb-miniusb wire) but i have the salinty and dimming expansions hooked up for a few days without wifi and its hasnt cycled off i know if i hook up wifi it will happen within a couple hours

Any update on a fix with wifi unhooked its still running

Ran allday without wifi tomorrow I'm going to hook up rf and see if I can get it to work

Ok I re hooked up wii not an hour later it started doing it I does look like its constantly rebooting the communication light blinks the screen is white then off and it just continues to do this. I unplugged wifi from head unit it continued to do it I unplugged the hub from relay box and everything ...

i had wifi disconnected all day and it has not done it i checked the version on headunit and it is 1.0.3 and the code on there now was created on the wizard yesterday so im assuming its the same

if i unplug the vga from head unit it does not reboot

if i un plug the power to everything it does reboot

i think im having a similar issue to war pigs with the screen going white... if just the salinty exp is into the usb hub its fine but when one of the other two expansions are on there its does the white screen.... as far as moving the head unit i have a 30wx18d stand....right now i have the relay bo...

im in the office now but last time i checked it was 1.0.3 i believe

#include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include <Wire.h> #include <OneWire.h> #include <Time.h> #include <DS1307RTC.h> #include <InternalEEPROM.h> #include <RA_NokiaLCD.h> #include <RA_ATO.h> #include <RA_Joystick.h> #include <LED.h> #include <RA_TempSensor.h> #inc...

ok today i received the dimming expansion kit..... yesterday my led stuff came in so all wiring was done yesterday and ran for 24 hours to insure no issues.... if you remeber when i hooked up the rf module my r/a would stop working screen blank white and status on head unit blinking,,,no wifi connec...

it would be really cool if through the touch display you could adjust relay and adjust the dimming expansion yet another expansion i will be buying if i can get my current ones to work

i just went over the whole system i think when i was measuring the dcv on the terminal my meter leads touch and shorted out because when i have all 3 drivers hooked up to the one channel and all working properly so i guess im going to order the dimming expansion along with a new driver from steves t...

disconnect the leds from where?
when i disconnect the pwm wire all the leds go out except for one string that i think the half of that driver is stuck on i literally just rewired my whole led fixture making sure and stiched out drivers and i switched it from white to blues and now the blue is doing it

i just re hooked up leds and there is like no display i musted have F up something while trying to test them :/

ok im at a lost the pwm port closest to the video cable is showing pretty close to display 7.9v for like 83% during the test mode the other port is showing voltage as .3 volts for 30% .8 for 80% .9 for 90% then reset back to

Is the test code just going to send a certain voltage out of pwm ports? Or will it prompt me as what to do? I'm assuming download the test code disconnect wire read voltage post up here

ok im going to have to do that tomorrow right now i just checked voltage at driver the display says i should be at 18% actintic but the voltage is 6.9 vdc and the brightness looks like its at 69% again as a gustimate i will check the voltage out of relay box under controllertester code tomorrow afte...

i disconnected the neg from my psu and measure from the pwm- to pwm+ while it was tied into the boards

i took the cable off of my laptop-> office computer and it seems to be working. i did not have a much time as anticipated(i sell heating and air conditioning and its 20 degrees here in nj which is a rarity) but im happy thats working. i did look into the pwm and is the pwm signal/dcv linear? the hea...

im going to look into the pwm in a little bit as far as relay box goes i just hooked up a couple things to verify operation and i think port 2 and 4 are not working but give me a couple hours and ill have a everything detailed as i should have some time early after noon to play with it but i know th...

My relays are still acting up is there a certain wire tht I need to get from relay box to head unit?