Reef Angel Forum

that did it! all good now, thanks Roberto

thank Roberto, but just to be clear: The three probes are aligned like this: Left (room temp) Middle (Display tank temp-broken) Right (Frag tank temp) from left to right as I look down on the controller. The one that has broken was in the middle. So when I reboot, which one becomes T1 and which one ...

So my temperature probe that goes into the display tank has stopped working, the wires in the part that connects to the controller have broken off. How do I switch the heater control to one of the two other probes? I tried just switching them over but that doesn't work. Do I have to upload new code ...

I want to know this too...why no responses??

old thread, but just this week, this problem fixed itself. Now it works fine, no more flashing of screens. Works just like the day I bought it

no, I can't desolder it. I have never done that before

I have been coping by leaving the screen on the "version" choice off the menu, but other than that the screens flash over and over. Is the only option to by a new head unit or is there some way to fix the joystick?
Thanks

Just last night, my screen on the Reefangel plus is flashing through all the different screens at the speed of light or close to it. No matter what I do, it just keeps cycling through the different screens. The joystick isn't stuck, and I can get the the list of menu options if I push in the joystic...

I removed the line, uploaded the code again. The iphone app connected once and I had all data and labels, then in five minutes I tried to refresh and it keeps saying "unable to process controller data" and all fields are zeros. Same with web uapp. The portal still works, although it shows ...

I did not enter anything in the cloud settings. Are you sure I have it coded correctly at the end of my code, the DDNS line?

the uapp doesn't work either. I can connect thru the portal, and I am using the same ip address in the portal that I am in my iphone app and the uapp. The portal connects, but both my iphone app and the uapp keep saying, "Unable to process controller data". I am using the external ip addre...

My ios app has not worked for months. Months. I have deleted it, reloaded it, reinstalled my code, made sure ip address is correct, and my port is definitely open. Why wont this freaking thing work? I load my name from the forums, add the ip address and the port and do not enter my username or passw...

umm, does this work on a mac? Can't load it on my 2015 macbook air

thanks for resurrecting this> I wound up just not using the tablet for this as I got no replies. I should have thought about this issue before I bought the windows 10 tablet, but live and learn. Doesn't seem that there will be an app made to take care of this. Do you have the cloud attachment? Is th...

No, no bus locks. It's like there was a siphon going on, but the return hose was above the water level of the sump, it wasn't in the water. I am going to check the Tom's aqua lift pump I was using, maybe the diaphram was stuck open?

Well, it happened again, poured two gallons of kalkwasser into the tank before I caught it. Put the whole tank in shock, had to run to the local fish store, buy 25 gallons of water and do an emergency water change. Nothing dead so far, but this ATO will go in the trash.

My ATO is not the expansion, its the the one that came with the RA unit. The valve goes up and down and I do hear the click when the valve is at the prescribed water level. However, the pump isn't shutting off. and then the time out trips, the red light comes on the RA unit, the pump still is runnin...

I use the UApp. thanks I will enter that into my code

How do I shorten feeding mode? It's too long with the code generated from the wizard for me. Sorry if this is obvious, but not for me.. thanks #include <ReefAngel_Features.h> #include <Globals.h> #include <RA_Wifi.h> #include <Wire.h> #include <OneWire.h> #include <Time.h> #include <DS1307RTC.h> #in...

I just got a tablet running windows 10 home. Trying to load the reefangel app, and the microsoft store says the app will not work on this machine, that it is supported for Windows 10 mobile. Is there a way to run the tablet in the mobile operating system or to get the windows app to run on windows 1...

Well, now when I restart Aurdino, Ii see it is updating the libraries to version 1.1. Does that version have else mode in the libraries? I didn't see a change log that said so...

When were the libraries last updated? The change log looks over a year old...I have version 1.1, and when I just tried to update using the library update utility, I restarted Audrino and now it says I have NO libraries. I tried using the library utility again and now it has blanks in the fields for ...

ok, pulled the usb cable out and the controller is still working. wifi isn't tho, the blue light blinks like eight times, pauses then blinks at the same rate.

yes, the screen is back up and running when I use the usb power cable...next step?

When I got home from work I found that power had gone out and then came back on in my fish room. Now, my controller screen is dark, I have a solid green and red light on the controller and nothing is working that is plugged into the box. Did this fry a fuse or is my unit dead? Any ideas on how to tr...

Thanks Drew, but I have set up a static id already and have port forwarding and have confirmed the port is open...

My wifi keeps losing connection...the blue light always blinks the proper slow blink, but it keeps not sending info to the internet. I will be able to use the portal and my iPhone for about a day to control my controller, then I will not be able to until I unplug the wifi unit and plug it back in. T...

You mean when I switch modes on the portal? I think so...I tried reef rest, which I thought didn't use duration, I set speed at 65, I tried long pulse, set speed at 65, duration at 8...

Now this uploads, but I can't control it from the portal... When I first upload it, the jebao sets to "0", it isn't running. Then I pick "custom" from the drop down menu in internal memory on the portal, and it runs in else mode, but then if I change to anything else (long pulse,...

Thank you Roberto...that was driving me crazy ...