Reef Angel Forum

what is the server you are trying to connect?
Password is case sensitive.
You can also try resetting the password on the forum. Your password may have been created before the cloud server was brought online.

Looks like some sort of stray voltage coming from somewhere.

It is probably missing from before the code you posted

The overheat will still turn off the port

Try moving the power cables away from the USB cables and sensor cables

No. I don't think that would work.

Correct

Your controller is not sending data to the portal server.
You may need to do this: https://forum.reefangel.com/viewtopic.php?f=3&t=4601

You may need to get a new relay box.

You can't use the cloud server then.
Create a new profile and make sure to enter only the ip address and port. Don't enter username nor password.

Ahh. Ok.
Does it say cloud connected on the screen of your RA*?
With RA*, you should create a profile with both ip address and port left blank and just enter your forum username and password. They are both case sensitive.

Do you have the cloud wifi attachment?
If not, you can't use the cloud server.
Make sure to not enter the cloud username and password when creating the profile. Enter only the ip address and port

Are you using the web based UApp?
https://forum.reefangel.com/UApp/

It is not sending data to the portal...
You may need to update: https://forum.reefangel.com/viewtopic.php?f=3&t=4601

Only if the controller is communicating with the Portal, which doesn't seem to be your case. Your banner is empty.

Try moving this: To the end of the code as the last check.

Connect just one at a time to find the culprit

Not sure about that one. Does the breaker on the relay box trip?

Did you try with a different browser?
Maybe clear the cache and see if that makes any difference.

You need to update the firmware of your module:
https://forum.reefangel.com/viewtopic.php?f=3&t=4601
Then, you need to setup port forwarding on your router to be able to allow external access.

Try this: http://forum.reefangel.com/viewtopic.php?f=7&t=2844

Pretty cool.
That's basically the work I had done with the old RF module.
Reverse engineering of the messages.
Unfortunately, RA doesn't have a BLE radio

Try that again.
All products work worldwide.

Can you move one of the Kessils to RA* and connect AQLink to dimming?

How many channels for AQLink do you need?

I don't think a new cloud hub would work for you. It would replicate exactly what the first dimming module would do. The salinity and pH expansion should work fine with the cloud hub. You may need to calibrate it though. What do you have connected to the RA* dimming channels and on the dimming modul...

Do you have the 16ch dimming too?

Can you post a screenshot of the error? Are you using Chrome?

The addresses are just 8 bytes that we keep in RAM on addrT1, addrT2 and addrT3.
https://github.com/reefangel/Libraries/ ... Sensor.cpp
If you just swap them, you can manipulate the order they are going to be displayed.

There are some resources and workaround out there, but I have never tried.
Look for Arduino on Chomebook.