Sacohen's Current code

Share you PDE file with our community
User avatar
Posts: 1830
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL
PostPosted: Fri Sep 27, 2013 9:22 am
This is a copy of my current code basically as a backup, but feel free to look over it and use what you may feel fits your needs.

The system includes...
RA +
Relay(original included)'
PH Probe
Standard ATO High and Low
Expansion Hub
Dimming Expansion
RANet and Relay
Water Level Expansion
Multi Water Level Expansion
Salinity Expansion
ATO Pump
WiFi module
Bluetooth module
3 Jebao Cables (WP-25, WP-40, DC-12000pump)
3 Temp Sensors
Dimmable Lunar Hub & 2 Moonlights

Basic control of the following.
Daylight
Actinic
Moonlight
Pumps
2 Jebao pumps (WP40 & WP25)
Control of my NatuReef DeNitrification chamber.
(Thanks to lnevo for help with this coding)

Random Jebao modes that lnevo did for PaulTurner911.

12/21/13
Changed the Speed for the Jebao pumps from 30% to 0% during feeding.

3/22/14
Added AutoFeeder triggered by Reef Angel.
How to modify the Eheim 3581 are here. http://wamas.org/forums/blog/13/entry-4 ... ontroller/

Added Dimmable Lunar Hub. Right now I'm just using the MoonPhase with an on and off time that coincide with my lighting. I added a slope to it so it seems like a moonrise and set

4/8/14 Added some code to turn a pump on every 8 hours for 15 min to stir my Kalkwasser.

5/26/14 Removed code to mix Kalkwasser.

8/1/14 Modified the Denitrification code to use variables instead of hard times. (Thanks to lnevo again for this)

8/4/14 Added Kalk Mixing Code. When the ATO reservoir is at 100% or above the pump in the reservoir turns on for 1 hr to mix the Kalkwasser in the reservoir and then turns off to let the unsaturated Kalk settle to bottom before use as ATO water.

9/11 Updated code for 1.1.1 Libraries. Added DNS server name and Server Authentication. Removed the Else Mode wave function code since it is now incorporated in to the libraries and added the Gyre Wave mode to the choice of Random Waves. Made some slight changes to the ATO code that had to be done because of the new libraries.

1/26/15 Added RA Net and Relay.

2/27/15 Added code to auto flush my RO/DI unit Monday, Wednesday and Friday using a 12V DC 1/2" Normally Closed Pneumatic Plastic Air Water Electric Solenoid Valve.

7/05/15 Added 2 Evergreen D120 LED lights. Modded for RA Dimming control and set up and East to West Sunrise/Sunet code.

Code: Select all
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>
#include <SoftwareSerial.h>

// Define Relay Ports by Name
#define Actinic_Lights     1
#define Day_Lights         2
#define Kalkwasser         3
#define Pumps              4
#define Unused             5
#define DeNit_Doser        6
#define DeNit_Pump         7
#define ATO_Pump           8

#define Unused             Box1_Port1
#define Feeder             Box1_Port2
#define Unused             Box1_Port3
#define Unused             Box1_Port4
#define Unused             Box1_Port5
#define Flush_Bypass       Box1_Port6
#define Main_RODI          Box1_Port7
#define Dummy              Box1_Port8


////// Place global variable code below here

// Does not need to be global.
// unsigned long ATOUpdate=0;

static time_t LastATO=millis();    // For de-bounced ATO

////// Place global variable code above here


void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = 0;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port4Bit;
ReefAngel.WaterChangePortsE[0] = Port1Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = 0;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = 0;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Set the Overheat temperature setting
InternalMemory.OverheatTemp_write( 825 );
//Set Standard Menu
ReefAngel.AddStandardMenu();
//Water Level
ReefAngel.AddMultiChannelWaterLevelExpansion();
//Webserver Authentication
ReefAngel.Network.WifiAuthentication("Sacohen:xxxxxxxx");
//DDNS Server
ReefAngel.DDNS("myreeftank");
ReefAngel.AddRANet();

// Feeeding and Water Change mode speed
ReefAngel.DCPump.FeedingSpeed=0;
ReefAngel.DCPump.WaterChangeSpeed=0;
ReefAngel.DCPump.ActinicChannel=Sync; // Now you're pump will be affected by the portal settings.
//ReefAngel.DCPump.DaylightChannel=AntiSync; // Now you're pump will be affected by the portal settings.
//ReefAngel.DCPump.AntiSyncOffset=85;

// Ports that are always on
ReefAngel.Relay.On( Pumps );
ReefAngel.Relay.On( Dummy );

////// Place additional initialization code below here


////// Place additional initialization code above here
}

void loop()
{
  ReefAngel.StandardLights( Actinic_Lights,12,0,22,0 );
  ReefAngel.StandardLights( Day_Lights,12,30,21,0 );
 
  //East to West Sunrise/Sunset Dimming
    ReefAngel.PWM.SetChannel( 0, PWMSlope(12,30,20,30,0,100,60,0) );
    ReefAngel.PWM.SetChannel( 1, PWMSlope(12,0,21,30,0,100,60,0) );
    ReefAngel.PWM.SetChannel( 2, PWMSlope(13,0,21,0,0,100,60,0) );
    ReefAngel.PWM.SetChannel( 3, PWMSlope(12,30,22,0,0,100,60,0) );
 
  // *******************  Debounced ATO code. Activate ATO no more than every 30 seconds.  *******************
//if (ReefAngel.WaterLevel.GetLevel(0) < 34) LastATO=millis();    // Start a timer
//if (millis()-LastATO<30000 && millis()-LastATO>10)     // Has it been less than 30,000 ms? (30 secs)
//  ReefAngel.Relay.Off(ATO_Pump);                         // If so, make sure the topoff pump is off
//  else
    ReefAngel.WaterLevelATO(0,ATO_Pump,720,34,36);                     // Otherwise, use the normal topoff routine.
 
  if ( hour()>=13 && hour()<21 )
  ReefAngel.PWM.SetChannel( 5, 0 );
  else
  ReefAngel.PWM.SetChannel( 5, PWMSlope(21,0,13,0,0,MoonPhase() ,60,0) );
 
  ////// Place your custom code below here

  //Flush RO/DI Membrane Monday, Wednseday and Friday times a week @ 9pm.

ReefAngel.Relay.Off(Main_RODI);
if (weekday()==dowMonday && hour()==21 && minute()<5)
  ReefAngel.Relay.On(Main_RODI);

if (weekday()==dowWednesday && hour()==21 && minute()<5)
  ReefAngel.Relay.On(Main_RODI);

if (weekday()==dowFriday && hour()==21 && minute()<10)
  ReefAngel.Relay.On(Main_RODI); 
 
ReefAngel.Relay.Off(Flush_Bypass);
if (weekday()==dowFriday && hour()==21 && minute()>=05 && minute()<10)
  ReefAngel.Relay.On(Flush_Bypass);
 
 
  //Mix Kalkwasser
static unsigned long Kalk_Mixing = 0;

static unsigned long stopTime = 0;
static byte prevWL=0;

if (ReefAngel.WaterLevel.GetLevel(1)==100 && prevWL<100) {
  stopTime=now()+7200; // Get time one hour from now.
}
prevWL = ReefAngel.WaterLevel.GetLevel(1); // Store the water level

if (now() < stopTime) { ReefAngel.Relay.On(Kalkwasser); } else { ReefAngel.Relay.Off(Kalkwasser); }
 
  //AutoFeeder
static unsigned long autofeeding = 0;

if ((now()%SECS_PER_DAY==64800)) //if it is 6 pm
{
ReefAngel.FeedingModeStart(); //START FEEDING MODE
}

if (ReefAngel.DisplayedMenu==FEEDING_MODE)
{
if ( autofeeding == 0 ) {
autofeeding = now(); //set the time of the start of feeding to variable feeding
}

if ((now()-autofeeding>=60) && (now()-autofeeding<=61)) //if between 60 and 61 seconds has past
{
ReefAngel.Relay.On(Feeder); //TURN FEEDER RELAY ON
}
else
{
ReefAngel.Relay.Off(Feeder); //TURN FEEDER RELAY OFF
}
} else {
if ( autofeeding > 0 ) {
autofeeding = 0;
}
}
  // DeNitrate Routine
int DeNit_Offset=3600;
int DeNit_Repeat=21600;
int DeNit_Doser_Offset=1200;
int DeNit_Doser_Runtime=600;
int DeNit_Pump_Runtime=1200;
int DeNit_ATO_Offtime=1500;

// Pump comes on first
ReefAngel.Relay.Set(DeNit_Pump,(now()-DeNit_Offset)%DeNit_Repeat<DeNit_Pump_Runtime);  // Runs denitrator pump
// Doser comes on second
ReefAngel.Relay.Set(DeNit_Doser,((now()-DeNit_Offset)-DeNit_Doser_Offset)%DeNit_Repeat<DeNit_Doser_Runtime); // Runs denitrator doser
   
  // Disable ATO
if ( (now()-3600)%21600<DeNit_ATO_Offtime) ReefAngel.WaterLevelATO(0,ATO_Pump,720,0,1);

  // Delay WL ATO after water change and DeNit_Dosing
  static time_t wcTimer=0;
  if (ReefAngel.DisplayedMenu == WATERCHANGE_MODE) wcTimer=now();

  // First 10 minutes after WC disable ATO
  if (now()-wcTimer >= 0 && now()-wcTimer < 600)
    ReefAngel.WaterLevelATO(0,ATO_Pump,720,0,1);

    // Track Salinity low duration
    static unsigned long lastGoodSal;
    static boolean lowSalFlag;
   
    // Salinity is good, update counter
    if (ReefAngel.Params.Salinity>=335) lastGoodSal=now();
   
    // Counter hasn't been updating in 300 seconds..
    if (now()-lastGoodSal>300) {
      lowSalFlag=true; // Salinity is definitely below 33.5
    } else {
      lowSalFlag=false; // Salinity back to normal
    }
   
    // Disable ATO if lowSalFlag is true
   //if (lowSalFlag) ReefAngel.WaterLevelATO(0,ATO_Pump,720,0,1);
   
  // Disable ATO if ATO High IsActive()
  if (ReefAngel.HighATO.IsActive())
    ReefAngel.WaterLevelATO(0,ATO_Pump,720,0,1);
   

// Add random mode if we set to Mode to Custom in portal
static int rmode;
static boolean changeMode=true;


// These are the modes we can cycle through. You can add more and even repeat...
byte modes[] = { ReefCrest, Gyre, Lagoon, Constant, TidalSwell, ShortPulse, LongPulse, Else, };

if (now()%SECS_PER_DAY==0 || changeMode==true) { // Change at midnight or if controller rebooted
rmode=random(100)%sizeof(modes); // Change the mode once per day to pick from our array
changeMode=false;
}

// Set timer when in feeding mode
static unsigned long feeding;
if (ReefAngel.DisplayedMenu==FEEDING_MODE) feeding=now();

if (now()-feeding<3600) {
  // Continue NTM for the 60 minutes
  ReefAngel.DCPump.UseMemory=false;
  ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
  ReefAngel.DCPump.Mode=NutrientTransport;
} else if (now()%SECS_PER_DAY<43200 || now()%SECS_PER_DAY>=79200) { // 12pm / 10pm
  // Night mode (go to 30%)
  ReefAngel.DCPump.UseMemory=false;
  ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
  ReefAngel.DCPump.Mode=Constant;
  ReefAngel.DCPump.Speed=30;
} else if (InternalMemory.DCPumpMode_read()==11) {
  // Custom Mode and nothing else going on
  ReefAngel.DCPump.UseMemory=false;
  ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
  ReefAngel.DCPump.Mode=modes[rmode];  // Put the mode to the random mode :)
  ReefAngel.DCPump.Speed=InternalMemory.DCPumpSpeed_read(); // Set speed from portal
} else {
  ReefAngel.DCPump.UseMemory=true; // Will reset all values from memory
}

  ////// Place your custom code above here

  // This should always be the last line
  ReefAngel.Portal( "Sacohen","xxxxxxxx" );
  ReefAngel.ShowInterface();
}

void DrawCustomMain()
{
int x,y;
char text[10];
// Parameters
#if defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 20, ReefAngel.Params,
ReefAngel.PWM.GetDaylightValue(), ReefAngel.PWM.GetActinicValue() );
#else // defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 20, ReefAngel.Params );
#endif // defined DisplayLEDPWM && ! defined RemoveAllLights
pingSerial();

// Water Level
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,75,57, "WL:" );
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,99,57, ReefAngel.WaterLevel.GetLevel() );

ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,66,66, "WL 1:" );
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,99,66, ReefAngel.WaterLevel.GetLevel(1) );

//Salinity 
  ConvertNumToString(text, ReefAngel.Params.Salinity, 10);
  strcat(text,"  ");
  ReefAngel.LCD.DrawText(DefaultFGColor,DefaultBGColor,39,75,"Salinity:");
  ReefAngel.LCD.DrawText(DefaultFGColor,DefaultBGColor,99,75,text);
pingSerial();

// Main Relay Box
byte TempRelay = ReefAngel.Relay.RelayData;
TempRelay &= ReefAngel.Relay.RelayMaskOff;
TempRelay |= ReefAngel.Relay.RelayMaskOn;
ReefAngel.LCD.DrawOutletBox( 12, 92, TempRelay );
pingSerial();
TempRelay = ReefAngel.Relay.RelayDataE[0];
TempRelay &= ReefAngel.Relay.RelayMaskOffE[0];
TempRelay |= ReefAngel.Relay.RelayMaskOnE[0];
ReefAngel.LCD.DrawOutletBox(12, 104, TempRelay);

// Date and Time
ReefAngel.LCD.DrawDate( 6, 122 );
pingSerial();
}

void DrawCustomGraph()
{
}
Last edited by Sacohen on Tue Dec 08, 2015 6:00 pm, edited 24 times in total.

Posts: 9
Joined: Fri Mar 07, 2014 5:39 pm
PostPosted: Fri Mar 07, 2014 5:46 pm
Hey Steve,

If i paste your entire code in the arduino and connect my RA and upload. WIll it just effect my jebaos? or will it make all my outlets the same as yours? sorry, very new here and haven't figured much out yet but want to get pumps going.

Thanks

Nick
User avatar
Posts: 1830
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL
PostPosted: Fri Mar 07, 2014 5:53 pm
It will make all your outlets the same as mine. Not only the outlets, but the WiFi, portal, everyting

Sent from my HTC One VX using Tapatalk
User avatar
Posts: 1830
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL
PostPosted: Sat Mar 08, 2014 6:06 pm
Nick;
If you want to use the random code you will need the following parts in red.

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>

// Define Relay Ports by Name
#define Actinic_Lights 1
#define Day_Lights 2
#define Unused 3
#define Pumps 4
#define Sump_Fan 5
#define DeNit_Doser 6
#define DeNit_Pump 7
#define Unused 8

#define ATO_Pump Box1_Port1
#define Moon_Lights Box1_Port2
#define Unused Box1_Port3
#define Unused Box1_Port4
#define Unused Box1_Port5
#define Unused Box1_Port6
#define Unused Box1_Port7
#define Dummy Box1_Port8


////// Place global variable code below here

// Does not need to be global.
// unsigned long ATOUpdate=0;

////// Place global variable code above here


void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = 0;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port4Bit;
ReefAngel.WaterChangePortsE[0] = Port1Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = Port1Bit | Port2Bit;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit;
// Use T2 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Set the Overheat temperature setting
InternalMemory.OverheatTemp_write( 825 );
//Set Standard Menu
ReefAngel.AddStandardMenu();

// Feeeding and Water Change mode speed
ReefAngel.DCPump.FeedingSpeed=0;
ReefAngel.DCPump.WaterChangeSpeed=0;
ReefAngel.DCPump.ActinicChannel=Sync; // Now you're pump will be affected by the portal settings.
ReefAngel.DCPump.DaylightChannel=AntiSync; // Now you're pump will be affected by the portal settings.


// Ports that are always on
ReefAngel.Relay.On( Pumps );
ReefAngel.Relay.On( Dummy );

////// Place additional initialization code below here


////// Place additional initialization code above here
}

void loop()
{
ReefAngel.StandardLights( Actinic_Lights,12,0,22,0 );
ReefAngel.StandardLights( Day_Lights,13,0,21,0 );
ReefAngel.StandardLights( Sump_Fan,13,0,21,0 );
ReefAngel.WaterLevelATO(ATO_Pump,720,31,34);

////// Place your custom code below here
ReefAngel.Relay.Set( Moon_Lights, !ReefAngel.Relay.Status( Actinic_Lights ) );

// DeNitrate Routine
int DeNit_Offset=3600;
int DeNit_Repeat=21600;
int DeNit_Doser_Offset=1200;
int DeNit_Doser_Runtime=1200;
int DeNit_Pump_Runtime=1200;
int DeNit_ATO_Offtime=1500;

// Pump comes on first
ReefAngel.Relay.Set(DeNit_Pump,(now()-3600)%21600<1200); // Runs for 1200s every 21600 seconds
// Doser comes on second
ReefAngel.Relay.Set(DeNit_Doser,((now()-3600)-1200)%21600<1200); // Runs for 1200s every 21600 seconds with 1200s offset

// Disable ATO
if ( (now()-3600)%21600<1500) ReefAngel.WaterLevelATO(ATO_Pump,720,0,1);

// Delay WL ATO after water change and DeNit_Dosing
static time_t wcTimer=0;
if (ReefAngel.DisplayedMenu == WATERCHANGE_MODE) wcTimer=now();

// First 10 minutes after WC disable ATO
if (now()-wcTimer >= 0 && now()-wcTimer < 600)
ReefAngel.WaterLevelATO(ATO_Pump,720,0,1);

// Track Salinity low duration
static unsigned long lastGoodSal;
static boolean lowSalFlag;

// Salinity is good, update counter
if (ReefAngel.Params.Salinity>=335) lastGoodSal=now();

// Counter hasn't been updating in 300 seconds..
if (now()-lastGoodSal>300) {
lowSalFlag=true; // Salinity is definitely below 33.5
} else {
lowSalFlag=false; // Salinity back to normal
}

// Disable ATO if lowSalFlag is true
if (lowSalFlag) ReefAngel.WaterLevelATO(ATO_Pump,720,0,1);

// Disable ATO if ATO High IsActive()
if (ReefAngel.HighATO.IsActive())
ReefAngel.WaterLevelATO(ATO_Pump,720,0,1);


// Add random mode if we set to Mode to Custom in portal
static int rmode;
static boolean changeMode=true;

// Add Else Mode definition..
const int Else=16;

// These are the modes we can cycle through. You can add more and even repeat...
byte modes[] = { ReefCrest, Lagoon, Constant, TidalSwell, ShortPulse, LongPulse, Else };

if (now()%SECS_PER_DAY==0 || changeMode==true) { // Change at midnight or if controller rebooted
rmode=random(100)%sizeof(modes); // Change the mode once per day to pick from our array
changeMode=false;
}

// Set timer when in feeding mode
static unsigned long feeding;
if (ReefAngel.DisplayedMenu==FEEDING_MODE) feeding=now();

if (now()-feeding<3600) {
// Continue NTM for the 60 minutes
ReefAngel.DCPump.UseMemory=false;
ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
ReefAngel.DCPump.Mode=NutrientTransport;
} else if (now()%SECS_PER_DAY<43200 || now()%SECS_PER_DAY>=79200) { // 12pm / 10pm
// Night mode (go to 30%)
ReefAngel.DCPump.UseMemory=false;
ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
ReefAngel.DCPump.Mode=Constant;
ReefAngel.DCPump.Speed=30;
} else if (InternalMemory.DCPumpMode_read()==11) {
// Custom Mode and nothing else going on
ReefAngel.DCPump.UseMemory=false;
ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
if (rmode==Else) {
ReefAngel.DCPump.UseMemory=false;
ReefAngel.DCPump.Mode=Constant;
ReefAngel.DCPump.Speed=ElseMode(InternalMemory.DCPumpSpeed_read(),20,true ); // ElseMode on sync mode, Portal Speed Setting +/- 20%
} else {
ReefAngel.DCPump.Mode=modes[rmode]; // Put the mode to the random mode :)
ReefAngel.DCPump.Speed=InternalMemory.DCPumpSpeed_read(); // Set speed from portal
}
} else {
ReefAngel.DCPump.UseMemory=true; // Will reset all values from memory
}

////// Place your custom code above here

// This should always be the last line
ReefAngel.Portal( "Sacohen","********" );
ReefAngel.ShowInterface();
}

void DrawCustomMain()
{
int x,y;
char text[10];
// Parameters
#if defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 20, ReefAngel.Params,
ReefAngel.PWM.GetDaylightValue(), ReefAngel.PWM.GetActinicValue() );
#else // defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 20, ReefAngel.Params );
#endif // defined DisplayLEDPWM && ! defined RemoveAllLights
pingSerial();

// Water Level
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,75,66, "WL:" );
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,99,66, ReefAngel.WaterLevel.GetLevel() );
ConvertNumToString(text, ReefAngel.Params.Salinity, 10);
strcat(text," ");
ReefAngel.LCD.DrawText(DefaultFGColor,DefaultBGColor,39,75,"Salinity:");
ReefAngel.LCD.DrawText(DefaultFGColor,DefaultBGColor,99,75,text);
pingSerial();

// Main Relay Box
byte TempRelay = ReefAngel.Relay.RelayData;
TempRelay &= ReefAngel.Relay.RelayMaskOff;
TempRelay |= ReefAngel.Relay.RelayMaskOn;
ReefAngel.LCD.DrawOutletBox( 12, 92, TempRelay );
pingSerial();
TempRelay = ReefAngel.Relay.RelayDataE[0];
TempRelay &= ReefAngel.Relay.RelayMaskOffE[0];
TempRelay |= ReefAngel.Relay.RelayMaskOnE[0];
ReefAngel.LCD.DrawOutletBox(12, 104, TempRelay);

// Date and Time
ReefAngel.LCD.DrawDate( 6, 122 );
pingSerial();
}

void DrawCustomGraph()
{
}
byte ElseMode( byte MidPoint, byte Offset, boolean WaveSync )
{
// Static's only initialize the first time they are called
static unsigned long LastChange=millis(); // Set the inital time that the last change occurred
static int Delay = random( 500, 3000); // Set the initial delay
static int NewSpeed = MidPoint; // Set the initial speed
static int AntiSpeed = MidPoint; // Set the initial anti sync speed
if ((millis()-LastChange) > Delay) // Check if the delay has elapsed
{
Delay=random(500,5000); // If so, come up with a new delay
int ChangeUp = random(Offset); // Amount to go up or down
if (random(100)<50) // 50/50 chance of speed going up or going down
{
NewSpeed = MidPoint - ChangeUp;
AntiSpeed = MidPoint + ChangeUp;
}
else
{
NewSpeed = MidPoint + ChangeUp;
AntiSpeed = MidPoint - ChangeUp;
}
LastChange=millis(); // Reset the time of the last change
}
if (WaveSync)
{
return NewSpeed;
}
else
{
return AntiSpeed;
}
}

Posts: 144
Joined: Tue Aug 14, 2012 1:11 pm
PostPosted: Mon Dec 01, 2014 1:03 pm
How do I use the code you have provided for the jaebo pumps but only for 1 pump?

so it would alternate and be random through out the day, but go to min setting for feeding, and off for water changes,
Adam
58 Gal
Image
User avatar
Posts: 1830
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL
PostPosted: Mon Dec 01, 2014 1:06 pm
Actually that code is for the old libraries that do not have Else mode built into them.
I'll need a little time to go through my current code and highlight what you need and what to remove for a single pump.
I'll try to get it put up today.

Posts: 144
Joined: Tue Aug 14, 2012 1:11 pm
PostPosted: Mon Dec 01, 2014 1:09 pm
That be awesome!!! Thanks

do you want me to pm you my current code?
Adam
58 Gal
Image
User avatar
Posts: 1830
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL
PostPosted: Mon Dec 01, 2014 1:12 pm
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>fF
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>f
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>

// Define Relay Ports by Name
#define Actinic_Lights 1
#define Day_Lights 2
#define Kalkwasser 3
#define Pumps 4
#define Sump_Fan 5
#define DeNit_Doser 6
#define DeNit_Pump 7
#define ATO_Pump 8

#define Unused Box1_Port1
#define Feeder Box1_Port2
#define Unused Box1_Port3
#define Unused Box1_Port4
#define Unused Box1_Port5
#define Unused Box1_Port6
#define Unused Box1_Port7
#define Dummy Box1_Port8


////// Place global variable code below here

// Does not need to be global.
// unsigned long ATOUpdate=0;

////// Place global variable code above here


void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = 0;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port4Bit;
ReefAngel.WaterChangePortsE[0] = Port1Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = Port1Bit | Port2Bit;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Set the Overheat temperature setting
InternalMemory.OverheatTemp_write( 825 );
//Set Standard Menu
ReefAngel.AddStandardMenu();
//Water Level
ReefAngel.AddMultiChannelWaterLevelExpansion();
//Webserver Authentication
//ReefAngel.Network.WifiAuthentication("Sacohen:S3tho31o");
//DDNS Server
ReefAngel.DDNS("myreeftank");

// Feeeding and Water Change mode speed
ReefAngel.DCPump.FeedingSpeed=0;
ReefAngel.DCPump.WaterChangeSpeed=0;
ReefAngel.DCPump.ActinicChannel=Sync; // Now you're pump will be affected by the portal settings.
//Remove this part for single pump
ReefAngel.DCPump.DaylightChannel=AntiSync; // Now you're pump will be affected by the portal settings.
ReefAngel.DCPump.AntiSyncOffset=100;


// Ports that are always on
ReefAngel.Relay.On( Pumps );
ReefAngel.Relay.On( Dummy );

////// Place additional initialization code below here


////// Place additional initialization code above here
}

void loop()
{
ReefAngel.StandardLights( Actinic_Lights,12,0,22,0 );
ReefAngel.StandardLights( Day_Lights,13,0,21,0 );
ReefAngel.StandardLights( Sump_Fan,13,0,21,0 );
ReefAngel.WaterLevelATO(0,ATO_Pump,720,28,31);
if ( hour()>=13 && hour()<21 )
ReefAngel.PWM.SetChannel( 5, 0 );
else
ReefAngel.PWM.SetChannel( 5, PWMSlope(21,0,13,0,0,MoonPhase() ,60,0) );

////// Place your custom code below here

//Mix Kalkwasser
static unsigned long Kalk_Mixing = 0;

static unsigned long stopTime = 0;
static byte prevWL=0;

if (ReefAngel.WaterLevel.GetLevel(1)>=100 && prevWL<100) {
stopTime=now()+3600; // Get time one hour from now.
}
prevWL = ReefAngel.WaterLevel.GetLevel(1); // Store the water level

if (now() < stopTime) { ReefAngel.Relay.On(Kalkwasser); } else { ReefAngel.Relay.Off(Kalkwasser); }

//AutoFeeder
static unsigned long autofeeding = 0;

if ((now()%SECS_PER_DAY==64800)) //if it is 6 pm
{
ReefAngel.FeedingModeStart(); //START FEEDING MODE
}

if (ReefAngel.DisplayedMenu==FEEDING_MODE)
{
if ( autofeeding == 0 ) {
autofeeding = now(); //set the time of the start of feeding to variable feeding
}

if ((now()-autofeeding>=60) && (now()-autofeeding<=61)) //if between 60 and 61 seconds has past
{
ReefAngel.Relay.On(Feeder); //TURN FEEDER RELAY ON
}
else
{
ReefAngel.Relay.Off(Feeder); //TURN FEEDER RELAY OFF
}
} else {
if ( autofeeding > 0 ) {
autofeeding = 0;
}
}
// DeNitrate Routine
int DeNit_Offset=3600;
int DeNit_Repeat=21600;
int DeNit_Doser_Offset=1200;
int DeNit_Doser_Runtime=600;
int DeNit_Pump_Runtime=1200;
int DeNit_ATO_Offtime=1500;

// Pump comes on first
ReefAngel.Relay.Set(DeNit_Pump,(now()-DeNit_Offset)%DeNit_Repeat<DeNit_Pump_Runtime); // Runs denitrator pump
// Doser comes on second
ReefAngel.Relay.Set(DeNit_Doser,((now()-DeNit_Offset)-DeNit_Doser_Offset)%DeNit_Repeat<DeNit_Doser_Runtime); // Runs denitrator doser

// Disable ATO
if ( (now()-3600)%21600<DeNit_ATO_Offtime) ReefAngel.WaterLevelATO(0,ATO_Pump,720,0,1);

// Delay WL ATO after water change and DeNit_Dosing
static time_t wcTimer=0;
if (ReefAngel.DisplayedMenu == WATERCHANGE_MODE) wcTimer=now();

// First 10 minutes after WC disable ATO
if (now()-wcTimer >= 0 && now()-wcTimer < 600)
ReefAngel.WaterLevelATO(0,ATO_Pump,720,0,1);

// Track Salinity low duration
static unsigned long lastGoodSal;
static boolean lowSalFlag;

// Salinity is good, update counter
if (ReefAngel.Params.Salinity>=335) lastGoodSal=now();

// Counter hasn't been updating in 300 seconds..
if (now()-lastGoodSal>300) {
lowSalFlag=true; // Salinity is definitely below 33.5
} else {
lowSalFlag=false; // Salinity back to normal
}

// Disable ATO if lowSalFlag is true
if (lowSalFlag) ReefAngel.WaterLevelATO(0,ATO_Pump,720,0,1);

// Disable ATO if ATO High IsActive()
if (ReefAngel.HighATO.IsActive())
ReefAngel.WaterLevelATO(0,ATO_Pump,720,0,1);


// Add random mode if we set to Mode to Custom in portal
static int rmode;
static boolean changeMode=true;


// These are the modes we can cycle through. You can add more and even repeat...
byte modes[] = { ReefCrest, Lagoon, Constant, TidalSwell, ShortPulse, LongPulse, Else, Gyre };

if (now()%SECS_PER_DAY==0 || changeMode==true) { // Change at midnight or if controller rebooted
rmode=random(100)%sizeof(modes); // Change the mode once per day to pick from our array
changeMode=false;
}

// Set timer when in feeding mode
static unsigned long feeding;
if (ReefAngel.DisplayedMenu==FEEDING_MODE) feeding=now();

if (now()-feeding<3600) {
// Continue NTM for the 60 minutes
ReefAngel.DCPump.UseMemory=false;
ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
ReefAngel.DCPump.Mode=NutrientTransport;
} else if (now()%SECS_PER_DAY<43200 || now()%SECS_PER_DAY>=79200) { // 12pm / 10pm
// Night mode (go to 30%)
ReefAngel.DCPump.UseMemory=false;
ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
ReefAngel.DCPump.Mode=Constant;
ReefAngel.DCPump.Speed=30;
} else if (InternalMemory.DCPumpMode_read()==11) {
// Custom Mode and nothing else going on
ReefAngel.DCPump.UseMemory=false;
ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
ReefAngel.DCPump.Mode=modes[rmode]; // Put the mode to the random mode :)
ReefAngel.DCPump.Speed=InternalMemory.DCPumpSpeed_read(); // Set speed from portal
} else {
ReefAngel.DCPump.UseMemory=true; // Will reset all values from memory
}


////// Place your custom code above here

// This should always be the last line
ReefAngel.Portal( "Sacohen","xxxxxxx" );
ReefAngel.ShowInterface();
}

void DrawCustomMain()
{
int x,y;
char text[10];
// Parameters
#if defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 20, ReefAngel.Params,
ReefAngel.PWM.GetDaylightValue(), ReefAngel.PWM.GetActinicValue() );
#else // defined DisplayLEDPWM && ! defined RemoveAllLights
ReefAngel.LCD.DrawMonitor( 15, 20, ReefAngel.Params );
#endif // defined DisplayLEDPWM && ! defined RemoveAllLights
pingSerial();

// Water Level
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,75,57, "WL:" );
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,99,57, ReefAngel.WaterLevel.GetLevel() );

ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,66,66, "WL 1:" );
ReefAngel.LCD.DrawText( COLOR_DARKGOLDENROD,DefaultBGColor,99,66, ReefAngel.WaterLevel.GetLevel(1) );

//Salinity
ConvertNumToString(text, ReefAngel.Params.Salinity, 10);
strcat(text," ");
ReefAngel.LCD.DrawText(DefaultFGColor,DefaultBGColor,39,75,"Salinity:");
ReefAngel.LCD.DrawText(DefaultFGColor,DefaultBGColor,99,75,text);
pingSerial();

// Main Relay Box
byte TempRelay = ReefAngel.Relay.RelayData;
TempRelay &= ReefAngel.Relay.RelayMaskOff;
TempRelay |= ReefAngel.Relay.RelayMaskOn;
ReefAngel.LCD.DrawOutletBox( 12, 92, TempRelay );
pingSerial();
TempRelay = ReefAngel.Relay.RelayDataE[0];
TempRelay &= ReefAngel.Relay.RelayMaskOffE[0];
TempRelay |= ReefAngel.Relay.RelayMaskOnE[0];
ReefAngel.LCD.DrawOutletBox(12, 104, TempRelay);

// Date and Time
ReefAngel.LCD.DrawDate( 6, 122 );
pingSerial();
}

void DrawCustomGraph()
{
}

Posts: 144
Joined: Tue Aug 14, 2012 1:11 pm
PostPosted: Mon Dec 01, 2014 2:54 pm
thanks, I will test it later today
Adam
58 Gal
Image

Posts: 144
Joined: Tue Aug 14, 2012 1:11 pm
PostPosted: Mon Dec 01, 2014 3:31 pm
tried it, but it comes up with an error.
_58test.cpp: In function 'void loop()':
_58test:98: error: 'Else' was not declared in this scope
_58test:98: error: 'Gyre' was not declared in this scope
Adam
58 Gal
Image
Next

Return to My PDE/INO file

Who is online

Users browsing this forum: No registered users and 2 guests

cron