Page 1 of 1

Re: jaebo code not working,

Posted: Thu Apr 03, 2014 9:12 pm
by rimai
Did you open the box to check?

Re: jaebo code not working,

Posted: Fri Apr 04, 2014 6:50 am
by Ademster
No, I just tested for voltage on the dimming port pins. with it commanding both actinic and daylight channel 100% no voltage..

Re: jaebo code not working,

Posted: Fri Apr 04, 2014 8:16 am
by rimai
I meant open the box to see if you have old style box or not.
If it is one of the old style boxes, you will need a PWM booster add-on.
Check the revision of the board or take a photo.

Re: jaebo code not working,

Posted: Fri Apr 04, 2014 9:57 am
by Ademster
I'll open it up tonight

Re: jaebo code not working,

Posted: Fri Apr 04, 2014 7:06 pm
by Ademster
Revision 8.0 looks like the IC chip fried. burn marks all around the ic chip and also you can see it got hot around the legs.

Guess I have to order one and replace it

Re: jaebo code not working,

Posted: Fri Apr 04, 2014 7:17 pm
by Ademster
Image

Image

Image

Image

Re: jaebo code not working,

Posted: Fri Apr 04, 2014 8:02 pm
by rimai
Looks like saltwater damage.