Temp 0.0 and timeout on first line of code

Share you PDE file with our community
Post Reply
imfortney
Posts: 15
Joined: Sat Jun 14, 2014 8:30 pm
Location: Key Largo, FL

Re: Temp 0.0 and timeout on first line of code

Post by imfortney »

now all i get is

Code: Select all

Rebooting Reef Angel Controller
avrdude: Send: . [1b] . [01] . [00] . [01] . [0e] . [01] . [14] 
avrdude: Recv: 
avrdude: stk500v2_ReceiveMessage(): timeout
avrdude: stk500v2_getsync(): timeout communicating with programmer
I know that the unit was rebooting on its own through out the day, because my skimmer is set to 60 min delay and when i got home the skimmer was off. not to mention the skimmate cup was empty.

this is frustrating. i had to send it back once before only to be told there is nothing wrong with it. When i received it back the unit functioned perfectly and i was able to program it.

i am leaving it unpowered over night maybe i will be able to reprogram it in the am.

what is the button inside on the main board to the right of the screen? Is there someway to reset the unit and start with blank memory?
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Temp 0.0 and timeout on first line of code

Post by rimai »

Everytime you program the unit, it will erase the previous one. So, it's like having a fresh memory everytime.
There seems to be something definitely wrong with this unit. It is not supposed to be doing all that.
PM me for RMA.
Roberto.
Post Reply