I am trying to set up controlling my jebao wp25 from the portal and it is not working. I want to be able to change the pump setting from the portal during the day and then have it be steady sine mode during the night. when I upload this, I can't change anything during the day from the portal, when I try and change modes, else mode stays on.
Any ideas? Thanks and Happy Thanksgiving...
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>
////// Place global variable code below here
////// Place global variable code above here
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.Use2014Screen(); // Let's use 2014 Screen
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = 0;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port5Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit | Port7Bit;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Feeeding and Water Change mode speed
ReefAngel.DCPump.FeedingSpeed=0;
ReefAngel.DCPump.WaterChangeSpeed=0;
// Ports that are always on
ReefAngel.Relay.On( Port6 );
////// Place additional initialization code below here
ReefAngel.CustomLabels[0]="Frag Pump";
ReefAngel.CustomLabels[1]="Actinics";
ReefAngel.CustomLabels[2]="Daylights";
ReefAngel.CustomLabels[3]="Frag LED";
ReefAngel.CustomLabels[4]="ATO Pump";
ReefAngel.CustomLabels[5]="Reactor";
ReefAngel.CustomLabels[6]="Heater";
ReefAngel.CustomLabels[7]="Fan";
////// Place additional initialization code above here
}
void loop()
{
ReefAngel.ActinicLights( Port1 );
ReefAngel.ActinicLights( Port2 );
ReefAngel.DayLights( Port3 );
ReefAngel.ActinicLights( Port4 );
ReefAngel.SingleATOLow( Port5 );
ReefAngel.StandardHeater( Port7 );
ReefAngel.StandardFan( Port8 );
ReefAngel.PWM.SetDaylight( MoonPhase() );
ReefAngel.DCPump.UseMemory = true;
if (hour()>=8 && hour()<21)
{
ReefAngel.PWM.SetDaylight(0);
if (ReefAngel.DCPump.Mode==Custom)
{
ReefAngel.PWM.SetActinic(ElseMode(65, 20, true));
ReefAngel.DCPump.UseMemory = false;
}
else
{
ReefAngel.DCPump.UseMemory = true;
}
}
else
{
ReefAngel.PWM.SetActinic(SineMode(75,35, 15, true));
}
////// Place your custom code below here
////// Place your custom code above here
// This should always be the last line
ReefAngel.Portal( "psyrob" );
ReefAngel.ShowInterface();
}
byte ElseMode( byte MidPoint, byte Offset, boolean WaveSync )
{
// Static's only initialize the first time they are called
static unsigned long LastChange=millis(); // Set the inital time that the last change occurred
static int Delay = random( 500, 1500); // Set the initial delay
static int NewSpeed = MidPoint; // Set the initial speed
static int AntiSpeed = MidPoint; // Set the initial anti sync speed
if ((millis()-LastChange) > Delay) // Check if the delay has elapsed
{
Delay=random(500,5000); // If so, come up with a new delay
int ChangeUp = random(Offset); // Amount to go up or down
if (random(100)<50) // 50/50 chance of speed going up or going down
{
NewSpeed = MidPoint - ChangeUp;
AntiSpeed = MidPoint + ChangeUp;
}
else
{
NewSpeed = MidPoint + ChangeUp;
AntiSpeed = MidPoint - ChangeUp;
}
LastChange=millis(); // Reset the time of the last change
}
if (WaveSync)
{
return NewSpeed;
}
else
{
return AntiSpeed;
}
}
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>
////// Place global variable code below here
////// Place global variable code above here
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.Use2014Screen(); // Let's use 2014 Screen
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = 0;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port5Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit | Port7Bit;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Feeeding and Water Change mode speed
ReefAngel.DCPump.FeedingSpeed=0;
ReefAngel.DCPump.WaterChangeSpeed=0;
// Ports that are always on
ReefAngel.Relay.On( Port6 );
////// Place additional initialization code below here
ReefAngel.CustomLabels[0]="Frag Pump";
ReefAngel.CustomLabels[1]="Actinics";
ReefAngel.CustomLabels[2]="Daylights";
ReefAngel.CustomLabels[3]="Frag LED";
ReefAngel.CustomLabels[4]="ATO Pump";
ReefAngel.CustomLabels[5]="Reactor";
ReefAngel.CustomLabels[6]="Heater";
ReefAngel.CustomLabels[7]="Fan";
////// Place additional initialization code above here
}
void loop()
{
ReefAngel.ActinicLights( Port1 );
ReefAngel.ActinicLights( Port2 );
ReefAngel.DayLights( Port3 );
ReefAngel.ActinicLights( Port4 );
ReefAngel.SingleATOLow( Port5 );
ReefAngel.StandardHeater( Port7 );
ReefAngel.StandardFan( Port8 );
ReefAngel.PWM.SetDaylight( MoonPhase() );
ReefAngel.PWM.SetActinic(SineMode(75,35,15,true)); // This will run unless something changes it
if (hour()>=8 && hour()<21) //runs from 8 am to 2000 (8 PM)
{
ReefAngel.DCPump.UseMemory = true;
if (ReefAngel.DCPump.Mode == Custom)
{
ReefAngel.DCPump.UseMemory = false;
ReefAngel.PWM.SetActinic(ElseMode(65,20,true));
}
}
////// Place your custom code below here
////// Place your custom code above here
// This should always be the last line
ReefAngel.Portal( "psyrob" );
ReefAngel.ShowInterface();
}
byte ElseMode( byte MidPoint, byte Offset, boolean WaveSync )
{
// Static's only initialize the first time they are called
static unsigned long LastChange=millis(); // Set the inital time that the last change occurred
static int Delay = random( 500, 1500); // Set the initial delay
static int NewSpeed = MidPoint; // Set the initial speed
static int AntiSpeed = MidPoint; // Set the initial anti sync speed
if ((millis()-LastChange) > Delay) // Check if the delay has elapsed
{
Delay=random(500,5000); // If so, come up with a new delay
int ChangeUp = random(Offset); // Amount to go up or down
if (random(100)<50) // 50/50 chance of speed going up or going down
{
NewSpeed = MidPoint - ChangeUp;
AntiSpeed = MidPoint + ChangeUp;
}
else
{
NewSpeed = MidPoint + ChangeUp;
AntiSpeed = MidPoint - ChangeUp;
}
LastChange=millis(); // Reset the time of the last change
}
if (WaveSync)
{
return NewSpeed;
}
else
{
return AntiSpeed;
}
}
Thanks: I uploaded this new code, but still can't change the pump from the portal. I switch to long pulse, for example, and it stays in custom, running else mode...
correction:
when I upload the code, it is in sine mode. I go to the portal or my ipad app, and if I change it to custom (which is else), I can't change it back to anything else...
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>
////// Place global variable code below here
////// Place global variable code above here
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.Use2014Screen(); // Let's use 2014 Screen
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = 0;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port5Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit | Port7Bit;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Feeeding and Water Change mode speed
ReefAngel.DCPump.FeedingSpeed=0;
ReefAngel.DCPump.WaterChangeSpeed=0;
// Ports that are always on
ReefAngel.Relay.On( Port6 );
////// Place additional initialization code below here
ReefAngel.CustomLabels[0]="Frag Pump";
ReefAngel.CustomLabels[1]="Actinics";
ReefAngel.CustomLabels[2]="Daylights";
ReefAngel.CustomLabels[3]="Frag LED";
ReefAngel.CustomLabels[4]="ATO Pump";
ReefAngel.CustomLabels[5]="Reactor";
ReefAngel.CustomLabels[6]="Heater";
ReefAngel.CustomLabels[7]="Fan";
////// Place additional initialization code above here
}
void loop()
{
ReefAngel.ActinicLights( Port1 );
ReefAngel.ActinicLights( Port2 );
ReefAngel.DayLights( Port3 );
ReefAngel.ActinicLights( Port4 );
ReefAngel.SingleATOLow( Port5 );
ReefAngel.StandardHeater( Port7 );
ReefAngel.StandardFan( Port8 );
ReefAngel.PWM.SetDaylight( MoonPhase() );
ReefAngel.DCPump.UseMemory = false;
ReefAngel.PWM.SetActinic(SineMode(75,35,15,true)); // This will run unless something changes it
if (hour()>=8 && hour()<21) //runs from 8 am to 2000 (8 PM)
{
if (ReefAngel.DCPump.Mode == Custom)
{
ReefAngel.DCPump.UseMemory = false;
ReefAngel.PWM.SetActinic(ElseMode(65,20,true));
}
else ReefAngel.DCPump.UseMemory = true;
}
////// Place your custom code below here
////// Place your custom code above here
// This should always be the last line
ReefAngel.Portal( "psyrob" );
ReefAngel.ShowInterface();
}
byte ElseMode( byte MidPoint, byte Offset, boolean WaveSync )
{
// Static's only initialize the first time they are called
static unsigned long LastChange=millis(); // Set the inital time that the last change occurred
static int Delay = random( 500, 1500); // Set the initial delay
static int NewSpeed = MidPoint; // Set the initial speed
static int AntiSpeed = MidPoint; // Set the initial anti sync speed
if ((millis()-LastChange) > Delay) // Check if the delay has elapsed
{
Delay=random(500,5000); // If so, come up with a new delay
int ChangeUp = random(Offset); // Amount to go up or down
if (random(100)<50) // 50/50 chance of speed going up or going down
{
NewSpeed = MidPoint - ChangeUp;
AntiSpeed = MidPoint + ChangeUp;
}
else
{
NewSpeed = MidPoint + ChangeUp;
AntiSpeed = MidPoint - ChangeUp;
}
LastChange=millis(); // Reset the time of the last change
}
if (WaveSync)
{
return NewSpeed;
}
else
{
return AntiSpeed;
}
}
psyrob wrote:Still cant control jebao pump from portal or ipad app. It stays on custom (else) no matter what I change it to...
I appreciate your help, tho...
OK, this works (kind of). We forgot to set the sync channel to Actinic for the DC pumps.
The main problem is that when we use ReefAngel.SetActinic to set our pumps, it doesn't reflect on the pump section of the portal. It would be much better if you were using the dev libraries which has Else built in and selectable from the Portal.
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>
////// Place global variable code below here
////// Place global variable code above here
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.Use2014Screen(); // Let's use 2014 Screen
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = 0;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port5Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit | Port7Bit;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Feeeding and Water Change mode speed
ReefAngel.DCPump.FeedingSpeed=0;
ReefAngel.DCPump.WaterChangeSpeed=0;
// Ports that are always on
ReefAngel.Relay.On( Port6 );
////// Place additional initialization code below here
ReefAngel.CustomLabels[0]="Frag Pump";
ReefAngel.CustomLabels[1]="Actinics";
ReefAngel.CustomLabels[2]="Daylights";
ReefAngel.CustomLabels[3]="Frag LED";
ReefAngel.CustomLabels[4]="ATO Pump";
ReefAngel.CustomLabels[5]="Reactor";
ReefAngel.CustomLabels[6]="Heater";
ReefAngel.CustomLabels[7]="Fan";
////// Place additional initialization code above here
}
void loop()
{
ReefAngel.ActinicLights( Port1 );
ReefAngel.ActinicLights( Port2 );
ReefAngel.DayLights( Port3 );
ReefAngel.ActinicLights( Port4 );
ReefAngel.SingleATOLow( Port5 );
ReefAngel.StandardHeater( Port7 );
ReefAngel.StandardFan( Port8 );
ReefAngel.PWM.SetDaylight( MoonPhase() );
ReefAngel.DCPump.ActinicChannel = Sync;
ReefAngel.DCPump.UseMemory = false;
ReefAngel.PWM.SetActinic(SineMode(75,35,15,true)); // This will run unless something changes it
if (hour()>=8 && hour()<21) //runs from 8 am to 2000 (8 PM)
{
if (InternalMemory.DCPumpMode_read()==11) // Custom mode on Portal
{
ReefAngel.DCPump.UseMemory = false;
ReefAngel.PWM.SetActinic(ElseMode2(65,20,true));
}
else ReefAngel.DCPump.UseMemory = true;
}
////// Place your custom code below here
////// Place your custom code above here
// This should always be the last line
ReefAngel.Portal( "psyrob" );
ReefAngel.ShowInterface();
}
byte ElseMode( byte MidPoint, byte Offset, boolean WaveSync )
{
// Static's only initialize the first time they are called
static unsigned long LastChange=millis(); // Set the inital time that the last change occurred
static int Delay = random( 500, 1500); // Set the initial delay
static int NewSpeed = MidPoint; // Set the initial speed
static int AntiSpeed = MidPoint; // Set the initial anti sync speed
if ((millis()-LastChange) > Delay) // Check if the delay has elapsed
{
Delay=random(500,5000); // If so, come up with a new delay
int ChangeUp = random(Offset); // Amount to go up or down
if (random(100)<50) // 50/50 chance of speed going up or going down
{
NewSpeed = MidPoint - ChangeUp;
AntiSpeed = MidPoint + ChangeUp;
}
else
{
NewSpeed = MidPoint + ChangeUp;
AntiSpeed = MidPoint - ChangeUp;
}
LastChange=millis(); // Reset the time of the last change
}
if (WaveSync)
{
return NewSpeed;
}
else
{
return AntiSpeed;
}
}
ReefAngel.DCPump.ActinicChannel = Sync;
ReefAngel.DCPump.UseMemory = false;
ReefAngel.DCPump.SetMode(Sine,75,35,15); // This will run unless something changes it
if (hour()>=8 && hour()<21) //runs from 8 am to 2000 (8 PM)
{
if (InternalMemory.DCPumpMode_read()==11) // Custom mode on Portal
{
ReefAngel.DCPump.UseMemory = false;
ReefAngel.DCPump.SetMode(Else,65,20);
}
else ReefAngel.DCPump.UseMemory = true;
}
Ok, didn't realize else mode had been added to the libraries. I can update the libraries and change my code like you have here. So is custom mode not needed in my coding to do what I want? I want it to run else all day unless I change from the portal...
And thanks again