controlling Jebao from portal

Share you PDE file with our community

Posts: 243
Joined: Thu Sep 01, 2011 8:44 pm
PostPosted: Thu Nov 27, 2014 3:20 pm
I am trying to set up controlling my jebao wp25 from the portal and it is not working. I want to be able to change the pump setting from the portal during the day and then have it be steady sine mode during the night. when I upload this, I can't change anything during the day from the portal, when I try and change modes, else mode stays on.
Any ideas? Thanks and Happy Thanksgiving...
Code: Select all
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>

////// Place global variable code below here


////// Place global variable code above here


void setup()
{
    // This must be the first line
    ReefAngel.Init();  //Initialize controller
    ReefAngel.Use2014Screen();  // Let's use 2014 Screen
    // Ports toggled in Feeding Mode
    ReefAngel.FeedingModePorts = 0;
    // Ports toggled in Water Change Mode
    ReefAngel.WaterChangePorts = Port5Bit;
    // Ports toggled when Lights On / Off menu entry selected
    ReefAngel.LightsOnPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit;
    // Ports turned off when Overheat temperature exceeded
    ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit | Port7Bit;
    // Use T1 probe as temperature and overheat functions
    ReefAngel.TempProbe = T1_PROBE;
    ReefAngel.OverheatProbe = T1_PROBE;

    // Feeeding and Water Change mode speed
    ReefAngel.DCPump.FeedingSpeed=0;
    ReefAngel.DCPump.WaterChangeSpeed=0;


    // Ports that are always on
    ReefAngel.Relay.On( Port6 );

    ////// Place additional initialization code below here
    ReefAngel.CustomLabels[0]="Frag Pump"; 
    ReefAngel.CustomLabels[1]="Actinics"; 
    ReefAngel.CustomLabels[2]="Daylights"; 
    ReefAngel.CustomLabels[3]="Frag LED"; 
    ReefAngel.CustomLabels[4]="ATO Pump"; 
    ReefAngel.CustomLabels[5]="Reactor"; 
    ReefAngel.CustomLabels[6]="Heater"; 
    ReefAngel.CustomLabels[7]="Fan"; 

    ////// Place additional initialization code above here
}

void loop()
{
    ReefAngel.ActinicLights( Port1 );
    ReefAngel.ActinicLights( Port2 );
    ReefAngel.DayLights( Port3 );
    ReefAngel.ActinicLights( Port4 );
    ReefAngel.SingleATOLow( Port5 );
    ReefAngel.StandardHeater( Port7 );
    ReefAngel.StandardFan( Port8 );
    ReefAngel.PWM.SetDaylight( MoonPhase() );
    ReefAngel.DCPump.UseMemory = true;
   
 
       if (hour()>=8 && hour()<21)
   
     {
             ReefAngel.PWM.SetDaylight(0);
        if (ReefAngel.DCPump.Mode==Custom)
          {
         ReefAngel.PWM.SetActinic(ElseMode(65, 20, true));
         
            ReefAngel.DCPump.UseMemory = false;
          }
         
          else
            {
            ReefAngel.DCPump.UseMemory = true;
            }
      }
           
          else
         {
         ReefAngel.PWM.SetActinic(SineMode(75,35, 15, true));
         }
           
   
 
    ////// Place your custom code below here
   

    ////// Place your custom code above here

    // This should always be the last line
    ReefAngel.Portal( "psyrob" );
    ReefAngel.ShowInterface();
}

byte ElseMode( byte MidPoint, byte Offset, boolean WaveSync )
{
  // Static's only initialize the first time they are called
  static unsigned long LastChange=millis();        // Set the inital time that the last change occurred
  static int Delay = random( 500, 1500);           // Set the initial delay
  static int NewSpeed = MidPoint;                  // Set the initial speed
  static int AntiSpeed = MidPoint;                 // Set the initial anti sync speed
  if ((millis()-LastChange) > Delay)               // Check if the delay has elapsed
  {
    Delay=random(500,5000);                        // If so, come up with a new delay
    int ChangeUp = random(Offset);                 // Amount to go up or down
    if (random(100)<50)                            // 50/50 chance of speed going up or going down
    {
      NewSpeed = MidPoint - ChangeUp;
      AntiSpeed = MidPoint + ChangeUp;
    }
    else
    {
      NewSpeed = MidPoint + ChangeUp;
      AntiSpeed = MidPoint - ChangeUp;
    }
    LastChange=millis();                           // Reset the time of the last change
  }
  if (WaveSync)
  {
    return NewSpeed;
  }
  else
  {
    return AntiSpeed;
  }
}

Image
User avatar
Posts: 1426
Joined: Fri Mar 29, 2013 3:51 pm
Location: Oklahoma City
PostPosted: Thu Nov 27, 2014 6:08 pm
OK, so you want Portal control from 8 AM to 8 PM, with "Custom" being Else mode, and then Sine after 8 PM?
User avatar
Posts: 1426
Joined: Fri Mar 29, 2013 3:51 pm
Location: Oklahoma City
PostPosted: Thu Nov 27, 2014 6:21 pm
Try this:

Code: Select all
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>

////// Place global variable code below here


////// Place global variable code above here


void setup()
{
  // This must be the first line
  ReefAngel.Init();  //Initialize controller
  ReefAngel.Use2014Screen();  // Let's use 2014 Screen
  // Ports toggled in Feeding Mode
  ReefAngel.FeedingModePorts = 0;
  // Ports toggled in Water Change Mode
  ReefAngel.WaterChangePorts = Port5Bit;
  // Ports toggled when Lights On / Off menu entry selected
  ReefAngel.LightsOnPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit;
  // Ports turned off when Overheat temperature exceeded
  ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit | Port7Bit;
  // Use T1 probe as temperature and overheat functions
  ReefAngel.TempProbe = T1_PROBE;
  ReefAngel.OverheatProbe = T1_PROBE;

  // Feeeding and Water Change mode speed
  ReefAngel.DCPump.FeedingSpeed=0;
  ReefAngel.DCPump.WaterChangeSpeed=0;


  // Ports that are always on
  ReefAngel.Relay.On( Port6 );

  ////// Place additional initialization code below here
  ReefAngel.CustomLabels[0]="Frag Pump"; 
  ReefAngel.CustomLabels[1]="Actinics"; 
  ReefAngel.CustomLabels[2]="Daylights"; 
  ReefAngel.CustomLabels[3]="Frag LED"; 
  ReefAngel.CustomLabels[4]="ATO Pump"; 
  ReefAngel.CustomLabels[5]="Reactor"; 
  ReefAngel.CustomLabels[6]="Heater"; 
  ReefAngel.CustomLabels[7]="Fan"; 

  ////// Place additional initialization code above here
}

void loop()
{
  ReefAngel.ActinicLights( Port1 );
  ReefAngel.ActinicLights( Port2 );
  ReefAngel.DayLights( Port3 );
  ReefAngel.ActinicLights( Port4 );
  ReefAngel.SingleATOLow( Port5 );
  ReefAngel.StandardHeater( Port7 );
  ReefAngel.StandardFan( Port8 );
  ReefAngel.PWM.SetDaylight( MoonPhase() );

  ReefAngel.PWM.SetActinic(SineMode(75,35,15,true));    // This will run unless something changes it

  if (hour()>=8 && hour()<21)    //runs from 8 am to 2000 (8 PM)
  {
    ReefAngel.DCPump.UseMemory = true;

    if (ReefAngel.DCPump.Mode == Custom)
    {
      ReefAngel.DCPump.UseMemory = false;
      ReefAngel.PWM.SetActinic(ElseMode(65,20,true));
    }
  }



  ////// Place your custom code below here


    ////// Place your custom code above here

    // This should always be the last line
  ReefAngel.Portal( "psyrob" );
  ReefAngel.ShowInterface();
}

byte ElseMode( byte MidPoint, byte Offset, boolean WaveSync )
{
  // Static's only initialize the first time they are called
  static unsigned long LastChange=millis();        // Set the inital time that the last change occurred
  static int Delay = random( 500, 1500);           // Set the initial delay
  static int NewSpeed = MidPoint;                  // Set the initial speed
  static int AntiSpeed = MidPoint;                 // Set the initial anti sync speed
  if ((millis()-LastChange) > Delay)               // Check if the delay has elapsed
  {
    Delay=random(500,5000);                        // If so, come up with a new delay
    int ChangeUp = random(Offset);                 // Amount to go up or down
    if (random(100)<50)                            // 50/50 chance of speed going up or going down
    {
      NewSpeed = MidPoint - ChangeUp;
      AntiSpeed = MidPoint + ChangeUp;
    }
    else
    {
      NewSpeed = MidPoint + ChangeUp;
      AntiSpeed = MidPoint - ChangeUp;
    }
    LastChange=millis();                           // Reset the time of the last change
  }
  if (WaveSync)
  {
    return NewSpeed;
  }
  else
  {
    return AntiSpeed;
  }
}



--Colin

Posts: 243
Joined: Thu Sep 01, 2011 8:44 pm
PostPosted: Fri Nov 28, 2014 3:42 pm
Thanks: I uploaded this new code, but still can't change the pump from the portal. I switch to long pulse, for example, and it stays in custom, running else mode...
Image

Posts: 243
Joined: Thu Sep 01, 2011 8:44 pm
PostPosted: Fri Nov 28, 2014 4:05 pm
correction:
when I upload the code, it is in sine mode. I go to the portal or my ipad app, and if I change it to custom (which is else), I can't change it back to anything else...
Image
User avatar
Posts: 1426
Joined: Fri Mar 29, 2013 3:51 pm
Location: Oklahoma City
PostPosted: Fri Nov 28, 2014 4:23 pm
Huh.

Try this.

Code: Select all
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>

////// Place global variable code below here


////// Place global variable code above here


void setup()
{
  // This must be the first line
  ReefAngel.Init();  //Initialize controller
  ReefAngel.Use2014Screen();  // Let's use 2014 Screen
  // Ports toggled in Feeding Mode
  ReefAngel.FeedingModePorts = 0;
  // Ports toggled in Water Change Mode
  ReefAngel.WaterChangePorts = Port5Bit;
  // Ports toggled when Lights On / Off menu entry selected
  ReefAngel.LightsOnPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit;
  // Ports turned off when Overheat temperature exceeded
  ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit | Port7Bit;
  // Use T1 probe as temperature and overheat functions
  ReefAngel.TempProbe = T1_PROBE;
  ReefAngel.OverheatProbe = T1_PROBE;

  // Feeeding and Water Change mode speed
  ReefAngel.DCPump.FeedingSpeed=0;
  ReefAngel.DCPump.WaterChangeSpeed=0;


  // Ports that are always on
  ReefAngel.Relay.On( Port6 );

  ////// Place additional initialization code below here
  ReefAngel.CustomLabels[0]="Frag Pump"; 
  ReefAngel.CustomLabels[1]="Actinics"; 
  ReefAngel.CustomLabels[2]="Daylights"; 
  ReefAngel.CustomLabels[3]="Frag LED"; 
  ReefAngel.CustomLabels[4]="ATO Pump"; 
  ReefAngel.CustomLabels[5]="Reactor"; 
  ReefAngel.CustomLabels[6]="Heater"; 
  ReefAngel.CustomLabels[7]="Fan"; 

  ////// Place additional initialization code above here
}

void loop()
{
  ReefAngel.ActinicLights( Port1 );
  ReefAngel.ActinicLights( Port2 );
  ReefAngel.DayLights( Port3 );
  ReefAngel.ActinicLights( Port4 );
  ReefAngel.SingleATOLow( Port5 );
  ReefAngel.StandardHeater( Port7 );
  ReefAngel.StandardFan( Port8 );
  ReefAngel.PWM.SetDaylight( MoonPhase() );

  ReefAngel.DCPump.UseMemory = false;
  ReefAngel.PWM.SetActinic(SineMode(75,35,15,true));    // This will run unless something changes it

  if (hour()>=8 && hour()<21)    //runs from 8 am to 2000 (8 PM)
  {

    if (ReefAngel.DCPump.Mode == Custom)
    {
      ReefAngel.DCPump.UseMemory = false;
      ReefAngel.PWM.SetActinic(ElseMode(65,20,true));
    }
    else ReefAngel.DCPump.UseMemory = true;
   }



  ////// Place your custom code below here


    ////// Place your custom code above here

    // This should always be the last line
  ReefAngel.Portal( "psyrob" );
  ReefAngel.ShowInterface();
}

byte ElseMode( byte MidPoint, byte Offset, boolean WaveSync )
{
  // Static's only initialize the first time they are called
  static unsigned long LastChange=millis();        // Set the inital time that the last change occurred
  static int Delay = random( 500, 1500);           // Set the initial delay
  static int NewSpeed = MidPoint;                  // Set the initial speed
  static int AntiSpeed = MidPoint;                 // Set the initial anti sync speed
  if ((millis()-LastChange) > Delay)               // Check if the delay has elapsed
  {
    Delay=random(500,5000);                        // If so, come up with a new delay
    int ChangeUp = random(Offset);                 // Amount to go up or down
    if (random(100)<50)                            // 50/50 chance of speed going up or going down
    {
      NewSpeed = MidPoint - ChangeUp;
      AntiSpeed = MidPoint + ChangeUp;
    }
    else
    {
      NewSpeed = MidPoint + ChangeUp;
      AntiSpeed = MidPoint - ChangeUp;
    }
    LastChange=millis();                           // Reset the time of the last change
  }
  if (WaveSync)
  {
    return NewSpeed;
  }
  else
  {
    return AntiSpeed;
  }
}


Edit: Made a minor fix.

Posts: 243
Joined: Thu Sep 01, 2011 8:44 pm
PostPosted: Sun Nov 30, 2014 1:19 pm
Still cant control jebao pump from portal or ipad app. It stays on custom (else) no matter what I change it to...
I appreciate your help, tho...
Image
User avatar
Posts: 1426
Joined: Fri Mar 29, 2013 3:51 pm
Location: Oklahoma City
PostPosted: Sun Nov 30, 2014 3:45 pm
psyrob wrote:Still cant control jebao pump from portal or ipad app. It stays on custom (else) no matter what I change it to...
I appreciate your help, tho...


OK, this works (kind of). We forgot to set the sync channel to Actinic for the DC pumps.

The main problem is that when we use ReefAngel.SetActinic to set our pumps, it doesn't reflect on the pump section of the portal. It would be much better if you were using the dev libraries which has Else built in and selectable from the Portal.

Code: Select all
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>

////// Place global variable code below here


////// Place global variable code above here


void setup()
{
  // This must be the first line
  ReefAngel.Init();  //Initialize controller
  ReefAngel.Use2014Screen();  // Let's use 2014 Screen
  // Ports toggled in Feeding Mode
  ReefAngel.FeedingModePorts = 0;
  // Ports toggled in Water Change Mode
  ReefAngel.WaterChangePorts = Port5Bit;
  // Ports toggled when Lights On / Off menu entry selected
  ReefAngel.LightsOnPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit;
  // Ports turned off when Overheat temperature exceeded
  ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit | Port7Bit;
  // Use T1 probe as temperature and overheat functions
  ReefAngel.TempProbe = T1_PROBE;
  ReefAngel.OverheatProbe = T1_PROBE;

  // Feeeding and Water Change mode speed
  ReefAngel.DCPump.FeedingSpeed=0;
  ReefAngel.DCPump.WaterChangeSpeed=0;


  // Ports that are always on
  ReefAngel.Relay.On( Port6 );

  ////// Place additional initialization code below here
  ReefAngel.CustomLabels[0]="Frag Pump"; 
  ReefAngel.CustomLabels[1]="Actinics"; 
  ReefAngel.CustomLabels[2]="Daylights"; 
  ReefAngel.CustomLabels[3]="Frag LED"; 
  ReefAngel.CustomLabels[4]="ATO Pump"; 
  ReefAngel.CustomLabels[5]="Reactor"; 
  ReefAngel.CustomLabels[6]="Heater"; 
  ReefAngel.CustomLabels[7]="Fan"; 

  ////// Place additional initialization code above here
}

void loop()
{
  ReefAngel.ActinicLights( Port1 );
  ReefAngel.ActinicLights( Port2 );
  ReefAngel.DayLights( Port3 );
  ReefAngel.ActinicLights( Port4 );
  ReefAngel.SingleATOLow( Port5 );
  ReefAngel.StandardHeater( Port7 );
  ReefAngel.StandardFan( Port8 );
  ReefAngel.PWM.SetDaylight( MoonPhase() );


  ReefAngel.DCPump.ActinicChannel = Sync;
  ReefAngel.DCPump.UseMemory = false;
  ReefAngel.PWM.SetActinic(SineMode(75,35,15,true));    // This will run unless something changes it

  if (hour()>=8 && hour()<21)    //runs from 8 am to 2000 (8 PM)
  {

  if (InternalMemory.DCPumpMode_read()==11)   // Custom mode on Portal
    {
      ReefAngel.DCPump.UseMemory = false;
      ReefAngel.PWM.SetActinic(ElseMode2(65,20,true));
    }
    else ReefAngel.DCPump.UseMemory = true;
   }



  ////// Place your custom code below here


    ////// Place your custom code above here

    // This should always be the last line
  ReefAngel.Portal( "psyrob" );
  ReefAngel.ShowInterface();
}

byte ElseMode( byte MidPoint, byte Offset, boolean WaveSync )
{
  // Static's only initialize the first time they are called
  static unsigned long LastChange=millis();        // Set the inital time that the last change occurred
  static int Delay = random( 500, 1500);           // Set the initial delay
  static int NewSpeed = MidPoint;                  // Set the initial speed
  static int AntiSpeed = MidPoint;                 // Set the initial anti sync speed
  if ((millis()-LastChange) > Delay)               // Check if the delay has elapsed
  {
    Delay=random(500,5000);                        // If so, come up with a new delay
    int ChangeUp = random(Offset);                 // Amount to go up or down
    if (random(100)<50)                            // 50/50 chance of speed going up or going down
    {
      NewSpeed = MidPoint - ChangeUp;
      AntiSpeed = MidPoint + ChangeUp;
    }
    else
    {
      NewSpeed = MidPoint + ChangeUp;
      AntiSpeed = MidPoint - ChangeUp;
    }
    LastChange=millis();                           // Reset the time of the last change
  }
  if (WaveSync)
  {
    return NewSpeed;
  }
  else
  {
    return AntiSpeed;
  }
}
User avatar
Posts: 1426
Joined: Fri Mar 29, 2013 3:51 pm
Location: Oklahoma City
PostPosted: Sun Nov 30, 2014 3:52 pm
With the new libraries it would be this:

Code: Select all
ReefAngel.DCPump.ActinicChannel = Sync;
  ReefAngel.DCPump.UseMemory = false;
  ReefAngel.DCPump.SetMode(Sine,75,35,15);    // This will run unless something changes it

  if (hour()>=8 && hour()<21)    //runs from 8 am to 2000 (8 PM)
  {

  if (InternalMemory.DCPumpMode_read()==11)   // Custom mode on Portal
    {
      ReefAngel.DCPump.UseMemory = false;
      ReefAngel.DCPump.SetMode(Else,65,20);
    }
    else ReefAngel.DCPump.UseMemory = true;
   }

Posts: 243
Joined: Thu Sep 01, 2011 8:44 pm
PostPosted: Sun Nov 30, 2014 7:55 pm
Ok, didn't realize else mode had been added to the libraries. I can update the libraries and change my code like you have here. So is custom mode not needed in my coding to do what I want? I want it to run else all day unless I change from the portal...
And thanks again :)
Image
Next

Return to My PDE/INO file

Who is online

Users browsing this forum: No registered users and 4 guests