I have code in here to refill my ATO reservoir every 3 days for 2 hours (many thanks to lnevo for the help).
I really am just throwing this up here to help with BACKUP!! I lost a previous version of my code when a hard drive crashed on my back drive (ironic) .
I also want to thank everyone who has helped me develop this code. Not being a coder, this forum has greatly helped me in the care of my beloved fish. Thank you so very much!!
So here it is:
Code: Select all
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <PAR.h>
#include <ReefAngel.h>
////// Place global variable code below here
////// Place global variable code above here
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.Use2014Screen(); // Let's use 2014 Screen
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = Port1Bit | Port5Bit | Port6Bit | Port7Bit | Port8Bit;
ReefAngel.FeedingModePortsE[0] = Port3Bit;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port1Bit | Port3Bit | Port5Bit | Port6Bit | Port7Bit | Port8Bit;
ReefAngel.WaterChangePortsE[0] = Port3Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = 0;
ReefAngel.LightsOnPortsE[0] = Port1Bit;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port3Bit | Port4Bit | Port5Bit | Port6Bit | Port7Bit | Port8Bit;
ReefAngel.OverheatShutoffPortsE[0] = 0;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Feeeding and Water Change mode speed
ReefAngel.DCPump.FeedingSpeed=0;
ReefAngel.DCPump.WaterChangeSpeed=0;
// Ports that are always on
ReefAngel.Relay.On( Port3 ); //Sump Powerhead. Main Relay Port 3
ReefAngel.Relay.On( Port4 );//Display Lights
ReefAngel.Relay.On( Port5 ); //Display Tank Power Heads MaiRelay Port 5
ReefAngel.Relay.On( Port8 ); //Return Pump Relay 1 Port 8
ReefAngel.Relay.On( Box1_Port1 ); //ATS Air Pump. Relay 2 Port 1
ReefAngel.Relay.On( Box1_Port2 ); //Media Reactor. Relay 2 Port 2
ReefAngel.Relay.On( Box1_Port3 ); //Aqualifter. Relay 2 Port 3
ReefAngel.Relay.Off( Box2_Port8 );//Referencing Relay 3
////// Place additional initialization code below here
////// Place additional initialization code above here
}
void loop()
{
ReefAngel.SingleATOLow( Port1 );
ReefAngel.Relay.DelayedOn( Port7 ); //Skimmer Relay 1 Port 7
ReefAngel.MHLights( Box1_Port4 ); //ATS Light Relay 2 Port 4
ReefAngel.DCPump.UseMemory = true; //ignore programming and use memory locations
ReefAngel.DCPump.DaylightChannel = Sync;
ReefAngel.DCPump.ActinicChannel = AntiSync;
////// Place your custom code below here
if ((now()%SECS_PER_DAY==31320)) //if it is 8:42 AM
{ReefAngel.FeedingModeStart();} //START FEEDING MODE
if ((now()%SECS_PER_DAY==67320)) //if it is 6:42 PM
{ReefAngel.FeedingModeStart();} //START FEEDING MODE
if (hour()>=22 || hour()<9)
{ // Sleep mode - slow things down
ReefAngel.DCPump.SetMode( ReefCrest,25,10 );
}
else
{
// Normal power
ReefAngel.DCPump.SetMode( ReefCrest,50,10 );
}
RefillATO();
////// Place your custom code above here
// This should always be the last line
ReefAngel.Portal( "spotted" );
ReefAngel.DDNS( "7730.homeip.net:2000" ); // Your DDNS is spotted-7730.homeip.net:2000.myreefangel.com
ReefAngel.ShowInterface();
}
// Set this to the port your solenoid is on.
#define ROSolenoid Box2_Port1
void RefillATO() {
static boolean refillActive=false; // Flag to determine if we've initiated the refill.
static time_t startedAt=0;
byte startAt=23;
byte runFor=2;
byte runEvery=3;
if ( now()+(startAt*SECS_PER_HOUR) % (runEvery*SECS_PER_DAY)==0 ) {
ReefAngel.Relay.Override(ROSolenoid,1); // We turn on the solenoid port.
startedAt=now();
refillActive=true;
}
if ( now()-startedAt == runFor*SECS_PER_HOUR && refillActive) {
ReefAngel.Relay.Override(ROSolenoid,0); // Back to automatic mode
refillActive=true;
startedAt=0;
}
}