Help Getting started again.
Re: Help Getting started again.
Roberto is there a permlink to the older version? I'd send him the one I have but I can't find the archive anywhere
Re: Help Getting started again.
Yeah, the old version is the one in the download page of the website. It is the 1.0.1 IDE with 1.1.3 main branch of libraries.
It appears you got the correct IDE, just mismatched settings.
The sketchbook location should be /Users/Steves-iMac/Documents/Arduino in your case.
After you change it, you must quit Arduino and open it again though. If everything is correct, next time you open Arduino, when you click the open button, you should see the RA_Preloaded and the other codes in the drop down list.
It appears you got the correct IDE, just mismatched settings.
The sketchbook location should be /Users/Steves-iMac/Documents/Arduino in your case.
After you change it, you must quit Arduino and open it again though. If everything is correct, next time you open Arduino, when you click the open button, you should see the RA_Preloaded and the other codes in the drop down list.
Roberto.
Re: Help Getting started again.
Ok. That seems to be better.
I'm not getting the following error...
There is no line # or anything else.
The last line in the verbose readout is...
I'm not getting the following error...
Code: Select all
static time_t LastATO=millis(); // For de-bounced ATO
I'm getting a very vague "Error Compiling".'time_t' does not name a type
There is no line # or anything else.
The last line in the verbose readout is...
Code: Select all
/Users/Steves-iMac/Documents/Arduino/libraries/Globals/Globals.h:366: warning: 'RANetStatus' defined but not used
Re: Help Getting started again.
Warnings are safe to ignore. If you don't want to see them, just suppress them. For some reason, the Mac version shows suppressed but you actually need to force it to show and then suppress or it will never suppress. Bug in the IDE, I guess.
Go to File->Preferences and select All and click Ok. Then go back and select none again and click ok.
That will suppress the warnings.
If it is complaining about time_t, you can use unsigned long instead, which is actually better.
Go to File->Preferences and select All and click Ok. Then go back and select none again and click ok.
That will suppress the warnings.
If it is complaining about time_t, you can use unsigned long instead, which is actually better.
Roberto.
Re: Help Getting started again.
There is no preferences under file.
It's under Arduino and there is nothing like you are talking about in those preferences.
This is that pane...
The file section has the following options...
I don't care about the warning as long as it will compile and upload properly, but it won't' do that.
I'm still getting that very vague "Error Compiling".
There is no line # or anything else.
The last line in the verbose readout is...
and it just stops.
It doesn't upload at all.
It happens on the Bluetooth or USB-TTY port connections.
It's under Arduino and there is nothing like you are talking about in those preferences.
This is that pane...
The file section has the following options...
I don't care about the warning as long as it will compile and upload properly, but it won't' do that.
I'm still getting that very vague "Error Compiling".
There is no line # or anything else.
The last line in the verbose readout is...
Code: Select all
/Users/Steves-iMac/Documents/Arduino/libraries/Globals/Globals.h:366: warning: 'RANetStatus' defined but not used
It doesn't upload at all.
It happens on the Bluetooth or USB-TTY port connections.
Re: Help Getting started again.
Try downgrading the libraries to the last production version would be my suggestion.
Re: Help Getting started again.
One thing I notice is that your sketchbook is pointing to the wrong folder.
Try deleting the code folder in the path.
Try deleting the code folder in the path.
Roberto.
Re: Help Getting started again.
I can't.
It is too large...
Your message contains 137874 characters. The maximum number of allowed characters is 100000.
It is too large...
Your message contains 137874 characters. The maximum number of allowed characters is 100000.
Re: Help Getting started again.
The sketch is in /Users/Steves-iMac/Documents/Arduino and the only other error besides the attached is the "error compiling" in the orange bar between the sketch and the error log.
Re: Help Getting started again.
Do you have RA Plus selected as board?
In the log you sent it says this "-mmcu=atmega328p ", which is the wrong chip. Standard RA used 328, but RA+ uses 2560.
Can you also post your code?
In the log you sent it says this "-mmcu=atmega328p ", which is the wrong chip. Standard RA used 328, but RA+ uses 2560.
Can you also post your code?
Roberto.
Re: Help Getting started again.
That did it.
I was stupid enough to follow the instructions for setting up the software for the MAC which said to set the controller to Reef Angel Controller w/ optiboot.
It's working fine now and the BlueTooth connection worked fine 1st shot.
I was stupid enough to follow the instructions for setting up the software for the MAC which said to set the controller to Reef Angel Controller w/ optiboot.
It's working fine now and the BlueTooth connection worked fine 1st shot.
Re: Help Getting started again.
Yep.
Stupid mistake on my part.
Thanks for your help Lnevo and Rimai.
Sorry about the wasted time.☹
Sent from my SM-G928P using Tapatalk
Stupid mistake on my part.
Thanks for your help Lnevo and Rimai.
Sorry about the wasted time.☹
Sent from my SM-G928P using Tapatalk