Main Menu features

Do you have a question on how to do something.
Ask in here.
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Re: Main Menu features

Post by lnevo »

That's pretty much it... just not sure why you should have full voltage on the dimming channels at midnight...
bigHUN
Posts: 97
Joined: Sat Dec 03, 2011 9:41 pm

Re: Main Menu features

Post by bigHUN »

does the number of digits for zero's have anything to do with it?
{0 -or- 00 -or- 000}
right now is 3.40 pm in my PC and the RA+ is late 3 minutes (last time they were synced 3 days ago), today I am running the slope from the same program above

ch0 = 00
ch1 = 000
ch2 = 800
ch3 = 77
ch4 = 0
ch5 = 980
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Main Menu features

Post by rimai »

The 0s are the remaining of the 100 that was previously drawn in the screen.
Your custom screen is not clearing the zeros. If you click the joystick to enter menu and exit it out, it will force a full refresh in the screen, which clears the zeros.
Roberto.
bigHUN
Posts: 97
Joined: Sat Dec 03, 2011 9:41 pm

Re: Main Menu features

Post by bigHUN »

any work around possible with 0 Volts to ram up to 10V and back to 0 Volts on the dimming module?
bigHUN
Posts: 97
Joined: Sat Dec 03, 2011 9:41 pm

Re: Main Menu features

Post by bigHUN »

So I can assume the dimming expansion module is "as is" ?
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Re: Main Menu features

Post by lnevo »

There should be no issue going 0V-10V-0V. Try loading the controller test code.
bigHUN
Posts: 97
Joined: Sat Dec 03, 2011 9:41 pm

Re: Main Menu features

Post by bigHUN »

"controller test code"

Where can I find it, what and how to do it to post back?
Post Reply