Code: Select all
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <PAR.h>
#include <ReefAngel.h>
////// Place global variable code below here
////// Place global variable code above here
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.Use2014Screen(); // Let's use 2014 Screen
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = Port5Bit | Port6Bit;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port5Bit | Port6Bit | Port7Bit | Port8Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = Port3Bit | Port4Bit;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port3Bit | Port4Bit | Port5Bit | Port6Bit | Port7Bit | Port8Bit;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Feeeding and Water Change mode speed
ReefAngel.DCPump.FeedingSpeed=0;
ReefAngel.DCPump.WaterChangeSpeed=0;
// Ports that are always on
ReefAngel.Relay.On( Port8 );
////// Place additional initialization code below here
// Password Protection username:xxx password:xxx
// ReefAngel.Network.WifiAuthentication("xxx:xxx");
////// Place additional initialization code above here
}
void loop()
{
ReefAngel.DosingPumpRepeat1( Port1 );
ReefAngel.MoonLights( Port2 );
ReefAngel.ActinicLights( Port3 );
ReefAngel.DayLights( Port4 );
ReefAngel.WavemakerRandom( Port5,120,1500 );
ReefAngel.WavemakerRandom( Port6,180,1000 );
ReefAngel.StandardHeater( Port7 );
ReefAngel.DCPump.ActinicChannel = Sync; // Now pump will be affected by the portal settings
// Remove next 2 lines for single dc pump
// ReefAngel.DCPump.DaylightChannel = AntiSync; // Now pump will be affected by the portal settings
// ReefAngel.DCPump.AntiSyncOffset=100;
////// Place your custom code below here
// Wavemaker Koralia night mode
if (hour()>=23 || hour()<8) ReefAngel.Relay.Off (Port6);
// DC pumps
// To run this code must choose Custom in portal
static int rmode;
static boolean changeMode=true;
// These are the modes we can cycle through. You can add more and even repeat...
byte modes[] = { ReefCrest, Lagoon, TidalSwell, ShortPulse, Sine, LongPulse, Else, Gyre, NutrientTransport };
if (now()%600==0 || changeMode==true) { // Change every 10 (600seconds) mins or controller reboot
rmode=random(100)%sizeof(modes); // Change the mode by picking from our array
changeMode=false;
}
// Set timer when in feeding mode
static unsigned long feeding;
if (ReefAngel.DisplayedMenu==FEEDING_MODE) feeding=now();
if (now()-feeding<1800) {
// Continue NutrientTranspot Mode for 30 minutes
ReefAngel.DCPump.UseMemory=false;
ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
ReefAngel.DCPump.Mode=NutrientTransport;
} else if (now()%SECS_PER_DAY<43200 || now()%SECS_PER_DAY>=79200) { // 12pm / 10pm
// Night mode (go to 30%)
ReefAngel.DCPump.UseMemory=false;
ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
ReefAngel.DCPump.Mode=Sine;
ReefAngel.DCPump.Speed=30;
} else if (InternalMemory.DCPumpMode_read()==11) {
// Custom Mode and nothing else going on
ReefAngel.DCPump.UseMemory=false;
ReefAngel.DCPump.Duration=InternalMemory.DCPumpDuration_read();
ReefAngel.DCPump.Mode=modes[rmode]; // Put the mode to the random mode :)
ReefAngel.DCPump.Speed=InternalMemory.DCPumpSpeed_read(); // Set speed from portal
} else {
ReefAngel.DCPump.UseMemory=true; // Will reset all values from memory
}
////// Place your custom code above here
// This should always be the last line
ReefAngel.Portal( "Reefology" );
ReefAngel.DDNS("xxx"); // Your DDNS is Reefology-xxx.myreefangel.com
ReefAngel.ShowInterface();
}