DC Pump PWM coding and modes

Do you have a question on how to do something.
Ask in here.
Post Reply
01M5PWR
Posts: 3
Joined: Thu May 28, 2015 2:34 pm
Location: Fort Collins, CO USA

DC Pump PWM coding and modes

Post by 01M5PWR »

I have recently installed my RA with a wifi attachment and 2 jebao cables connected to both of the PWM connections on my controller.

I am able to do some basic functionality through the portal and internal memory to control my pumps.

I have several questions about the coding and control of the pumps. I've been searching and have not really found and concise information about the pumps/setting and programming.

Is there an explanation somewhere about what the actual pump modes are and what their behavior is?

Do I need to adjust the light schedule and dimming settings in the memory to make sure the PWM light channels don't effect the DC pump operation?

Is there somewhere I can go with more in depth documentation?
120g High Mixed Reef
60g Cube Mixed Reef
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: DC Pump PWM coding and modes

Post by rimai »

Roberto.
01M5PWR
Posts: 3
Joined: Thu May 28, 2015 2:34 pm
Location: Fort Collins, CO USA

Re: DC Pump PWM coding and modes

Post by 01M5PWR »

Thank you, but I was actually looking for something to explain the actual pattern and what they are simulating.
120g High Mixed Reef
60g Cube Mixed Reef
Post Reply