So i finally got around to building my led strip and it's working great. I have it on a timer to turn on at 10am and off at 11pm. I've recently noticed I'm loosing the color I obtained by switching to t5. So I need to change led schedule. I want leds to come on from 10am to 12pm then back on again at 8pm to 11pm.
Is this doable and if so how.
Led strip program
Re: Led strip program
Add a line to turn off the relay between those hours
if (hour()>=12 && hour()<23) ReefAngel.Relay.Off(Port1);
if (hour()>=12 && hour()<23) ReefAngel.Relay.Off(Port1);
Re: Led strip program
Just add under the coinciding port?
Re: Led strip program
Put in custom section so you can reuse easier later but yeah as long as its after the line that turns the port on. Make sure to replace Port1 with what you need to turn off
Re: Led strip program
so input code now head unit keeps reseting. wont stay loaded. I removed line and still. Only after i removed custome lables did it act right any ideas?
Code: Select all
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <PAR.h>
#include <ReefAngel.h>
////// Place global variable code below here
////// Place global variable code above here
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.Use2014Screen(); // Let's use 2014 Screen
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = Port3Bit | Port4Bit | Port8Bit;
ReefAngel.FeedingModePortsE[0] = Port1Bit;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit | Port8Bit;
ReefAngel.WaterChangePortsE[0] = Port1Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = 0;
ReefAngel.LightsOnPortsE[0] = 0;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit | Port3Bit;
ReefAngel.OverheatShutoffPortsE[0] = Port1Bit;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Set the Overheat temperature setting
InternalMemory.OverheatTemp_write( 820 );
// Ports that are always on
ReefAngel.Relay.On( Port1 );
ReefAngel.Relay.On( Box1_Port2 );
////// Place additional initialization code below here
ReefAngel.CustomLabels[0]="RETURN";
ReefAngel.CustomLabels[1]="HEATER";
ReefAngel.CustomLabels[2]="SKIMMER";
ReefAngel.CustomLabels[3]="POWER HEADS";
ReefAngel.CustomLabels[4]="ACTINICS";
ReefAngel.CustomLabels[5]="DAY LIGHTS";
ReefAngel.CustomLabels[6]="FAN";
ReefAngel.CustomLabels[7]="ATO";
ReefAngel.CustomLabels[8]="UV";
ReefAngel.CustomLabels[9]="CABINET LT";
ReefAngel.CustomLabels[10]="FUGE LIGHT";
ReefAngel.CustomLabels[11]= "LED STRIP";
ReefAngel.CustomLabels[12]="UNUSED";
ReefAngel.CustomLabels[13]="UNUSED";
ReefAngel.CustomLabels[14]="UNUSED";
ReefAngel.CustomLabels[15]="UNUSED";
////// Place additional initialization code above here
}
void loop()
{
ReefAngel.StandardHeater( Port2,780,790 );
ReefAngel.Relay.DelayedOn( Port3,5 );
ReefAngel.PHControl( Port4,818,822 );
ReefAngel.StandardLights( Port5,10,0,22,0 );
ReefAngel.StandardLights( Port6,12,0,20,0 );
ReefAngel.StandardFan( Port7,790,800 );
ReefAngel.StandardATO( Port8,60 );
ReefAngel.StandardLights( Box1_Port1,22,0,8,0 );
ReefAngel.StandardLights( Box1_Port3,21,0,10,0 );
ReefAngel.StandardLights( Box1_Port4,8,0,23,0 );
ReefAngel.PWM.SetDaylight( PWMParabola(9,0,20,0,0,100,0) );
ReefAngel.PWM.SetActinic( PWMParabola(9,0,20,0,0,100,0) );
////// Place your custom code below here
if (hour()>=12 && hour()<23) ReefAngel.Relay.Off( Box1_Port4 );
////// Place your custom code above here
// This should always be the last line
}
Re: Led strip program
So back end of led code not working. The 7p to 11pm on off function doest work. The am part is ok tho...hmmm
Re: Led strip program
that did it thanks!
also got custom lables to work.
also got custom lables to work.