shorten feeding mode

Do you have a question on how to do something.
Ask in here.

Posts: 243
Joined: Thu Sep 01, 2011 8:44 pm
PostPosted: Thu Oct 27, 2016 6:50 pm
How do I shorten feeding mode? It's too long with the code generated from the wizard for me. Sorry if this is obvious, but not for me..

Code: Select all
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <PAR.h>
#include <ReefAngel.h>

////// Place global variable code below here

////// Place global variable code above here

void setup()
    // This must be the first line
    ReefAngel.Init();  //Initialize controller
    ReefAngel.Use2014Screen();  // Let's use 2014 Screen
    ReefAngel.AddHumidityExpansion();  // Humidity Expanion Module
    // Ports toggled in Feeding Mode
    ReefAngel.FeedingModePorts = Port1Bit;
    // Ports toggled in Water Change Mode
    ReefAngel.WaterChangePorts = Port1Bit;
    // Ports toggled when Lights On / Off menu entry selected
    ReefAngel.LightsOnPorts = Port2Bit | Port3Bit | Port4Bit;
    // Ports turned off when Overheat temperature exceeded
    ReefAngel.OverheatShutoffPorts = Port2Bit | Port3Bit | Port4Bit | Port7Bit;
    // Use T1 probe as temperature and overheat functions
    ReefAngel.TempProbe = T1_PROBE;
    ReefAngel.OverheatProbe = T1_PROBE;

    // Feeeding and Water Change mode speed

    // Ports that are always on
    ReefAngel.Relay.On( Port1 );
    ReefAngel.Relay.On( Port6 );

    ////// Place additional initialization code below here

    ////// Place additional initialization code above here

void loop()
    ReefAngel.ActinicLights( Port2 );
    ReefAngel.DayLights( Port3 );
    ReefAngel.DayLights( Port4 );
    ReefAngel.SingleATOLow( Port5 );
    ReefAngel.StandardHeater( Port7 );
    ReefAngel.StandardFan( Port8 );
    ReefAngel.PWM.SetDaylight( MoonPhase() );
    ReefAngel.DCPump.UseMemory = true;
    ReefAngel.DCPump.DaylightChannel = None;
    ReefAngel.DCPump.ActinicChannel = Sync;
    ////// Place your custom code below here

    ////// Place your custom code above here

    // This should always be the last line
    ReefAngel.Portal( "psyrob" );
    ReefAngel.DDNS( "" ); // Your DDNS is


Posts: 12459
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Thu Oct 27, 2016 10:55 pm
Do you use the android app?
If so, you can change it in the internal memory section.
If not, add this after ReefAngel.Init();
Code: Select all

60 is the number of seconds you want.

Posts: 243
Joined: Thu Sep 01, 2011 8:44 pm
PostPosted: Thu Nov 03, 2016 8:17 pm
I use the UApp. thanks I will enter that into my code

Return to How do I code ...

Who is online

Users browsing this forum: Bing [Bot] and 3 guests