Lights not turning off at night, aqua illumination

Do you have a question on how to do something.
Ask in here.

Posts: 11
Joined: Fri Dec 07, 2012 2:26 pm
PostPosted: Tue Dec 20, 2016 2:57 pm
I recently uploaded code generated from the wizard and now my Aqua Illumination lights will not shut off and my moon cycle is gone. The Aqua Illumination lights are connected to the Low ATO communication port. I have selected the AI cable attachment in the wizard. I chose the parabola setting for all three light colors, 9am-7pm.

But my lights do not shut off at night. They stay on 24/7.

Any suggestions on troubleshooting this? I previously had code that that followed the moon cycle well for several years but my backup file is missing so I've had to revisit this coding process. Seems like the wizard is capable of handling the AI LEDs. The code below is generated by the wizard and compiles, but is it the code? Why will my AI lights not shut off?

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <PAR.h>
#include <ReefAngel.h>

////// Place global variable code below here

////// Place global variable code above here

void setup()
    // This must be the first line
    ReefAngel.Init(); //Initialize controller
    ReefAngel.Use2014Screen(); // Let's use 2014 Screen
    // Ports toggled in Feeding Mode
    ReefAngel.FeedingModePorts = Port1Bit | Port5Bit | Port6Bit;
    // Ports toggled in Water Change Mode
    ReefAngel.WaterChangePorts = Port1Bit | Port3Bit | Port4Bit | Port5Bit | Port7Bit | Port8Bit;
    // Ports toggled when Lights On / Off menu entry selected
    ReefAngel.LightsOnPorts = 0;
    // Ports turned off when Overheat temperature exceeded
    ReefAngel.OverheatShutoffPorts = Port2Bit | Port4Bit | Port5Bit | Port6Bit | Port8Bit;
    // Use T1 probe as temperature and overheat functions
    ReefAngel.TempProbe = T1_PROBE;
    ReefAngel.OverheatProbe = T1_PROBE;

    // Setup ATO Port for AI communication
    ReefAngel.AI.SetPort( lowATOPin );

    // Ports that are always on
    ReefAngel.Relay.On( Port5 );
    ReefAngel.Relay.On( Port7 );
    ReefAngel.Relay.On( Port8 );

    ////// Place additional initialization code below here

    ////// Place additional initialization code above here

void loop()
    ReefAngel.StandardFan( Port1 );
    ReefAngel.DayLights( Port2 );
    ReefAngel.StandardHeater( Port3 );
    ReefAngel.CO2Control( Port4 );
    ReefAngel.Wavemaker1( Port6 );
    ////// Place your custom code below here

    ////// Place your custom code above here

    // This should always be the last line


Posts: 11970
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Tue Dec 20, 2016 3:12 pm
Try using hard codes settings.
We can't see what it is inside your internal memory.

Return to How do I code ...

Who is online

Users browsing this forum: No registered users and 1 guest