Page 1 of 1

Internal Mem Coding on and off help

Posted: Mon Apr 10, 2017 2:18 pm
by skehole
Hi all....first off, here's my code

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <PAR.h>
#include <ReefAngel.h>

////// Place global variable code below here


////// Place global variable code above here


void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.Use2014Screen(); // Let's use 2014 Screen
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = 0;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port3Bit | Port5Bit | Port6Bit | Port7Bit;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = 0;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port1Bit;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;


// Ports that are always on
ReefAngel.Relay.On( Port2 );
ReefAngel.Relay.On( Port3 );
ReefAngel.Relay.On( Port5 );
ReefAngel.Relay.On( Port6 );
ReefAngel.Relay.On( Port7 );
ReefAngel.Relay.On( Port8 );

////// Place additional initialization code below here


////// Place additional initialization code above here
}

void loop()
{
ReefAngel.StandardHeater( Port1 );
////// Place your custom code below here


////// Place your custom code above here

// This should always be the last line
ReefAngel.Portal( "skehole" );
ReefAngel.DDNS( "fish tank" ); // Your DDNS is skehole-fish tank.myreefangel.com
ReefAngel.ShowInterface();
}



On my currently unused relay 4 I would like to program my reefbrite to come on at 11am and off at 9pm. No ramping or nothing. Simply on and then off. Can someone assist me? TIA!

Re: Internal Mem Coding on and off help

Posted: Mon Apr 10, 2017 3:29 pm
by rimai
Have you tried using the wizard?
Also, don't use a space on your DDNS.
It will mess up the communication with the portal.
Spaces are not part of the HTTP protocol.

Re: Internal Mem Coding on and off help

Posted: Mon Apr 10, 2017 4:09 pm
by skehole
rimai wrote:Have you tried using the wizard?
Also, don't use a space on your DDNS.
It will mess up the communication with the portal.
Spaces are not part of the HTTP protocol.
I have not used the wizard, I was already running this and was wondering if there was a way to add in a line or whatever of code.

Yeah, I fixed that on my actual code. That was cut and pasted from the thread where we came to the same conclusion about the Ddns.