Need help with new code

Do you have a question on how to do something.
Ask in here.
Post Reply
AlanM
Posts: 263
Joined: Wed Jan 01, 2014 7:26 am

Re: Need help with new code

Post by AlanM »

Yes, I've tried a few. I know the hub works to some extent because I have the relay expansion on it and it is working, but I got that hub used from someone also around a year ago. It has some age on it. I'll try other ports on it.
AlanM
Posts: 263
Joined: Wed Jan 01, 2014 7:26 am

Re: Need help with new code

Post by AlanM »

OK. I found one source of bus lock, I think. It was the 16 channel dimmer. In all of my disconnecting and reconnecting of things I'd never dropped power to it and restarted it. Each time I plugged the USB connector back in to the expansion hub I would end up with flashing red status and bus error.

Now I'll let this run for a while to watch for more bus errors and will see if the pH expansion will work too when I go to plug it in.
Post Reply