RA* Unable to Update via Remote Upload
Re: RA* Unable to Update via Remote Upload
Let me check the server log and see what the request looked like.
Roberto.
Re: RA* Unable to Update via Remote Upload
I couldn't find any log.
Maybe the server doesn't log this type of error.
I don't know what to make out of this.
Does it get disconnected from the cloud server too?
Maybe the server doesn't log this type of error.
I don't know what to make out of this.
Does it get disconnected from the cloud server too?
Roberto.
-
- Posts: 54
- Joined: Tue Jul 23, 2013 5:56 pm
-
- Posts: 54
- Joined: Tue Jul 23, 2013 5:56 pm
Re: RA* Unable to Update via Remote Upload
Any further thoughts on this?
Re: RA* Unable to Update via Remote Upload
Not sure.
I don't understand how it stays connected when you are monitoring by itself and not when you bring downstairs.
I don't understand how it stays connected when you are monitoring by itself and not when you bring downstairs.
Roberto.
-
- Posts: 54
- Joined: Tue Jul 23, 2013 5:56 pm
Re: RA* Unable to Update via Remote Upload
The unit says connected and I can do things like turn on/off ports and clear alerts through my phone. The problem is that for some reason it stops connecting to the Portal after some time which prohibits me from sending remote uploads and receiving any email alerts or updates to the Portal. There is no difference on where it is located.
The reference to taking it downstairs had to do with troubleshooting. I originally thought the problem was where it was connected, thinking it was a networking issue. I proved that wrong by setting up the monitor and verifying that the device was logging a 400 error after some time. I left the monitor on for 24 hours and it never reconnected to the portal after the 400 errors started.
The reference to taking it downstairs had to do with troubleshooting. I originally thought the problem was where it was connected, thinking it was a networking issue. I proved that wrong by setting up the monitor and verifying that the device was logging a 400 error after some time. I left the monitor on for 24 hours and it never reconnected to the portal after the 400 errors started.
Re: RA* Unable to Update via Remote Upload
I am wondering if it does the same with a very basic code with just the cloudportal function.
Roberto.
-
- Posts: 54
- Joined: Tue Jul 23, 2013 5:56 pm
Re: RA* Unable to Update via Remote Upload
Let me know if you want me to test something
Re: RA* Unable to Update via Remote Upload
Try running a new code with just the cloudportal function and monitor.
Roberto.
-
- Posts: 54
- Joined: Tue Jul 23, 2013 5:56 pm
Re: RA* Unable to Update via Remote Upload
I uploaded the following to the RA*:
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.Star();
}
void loop()
{
ReefAngel.Network.Cloud();
// This should always be the last line
ReefAngel.ShowTouchInterface();
}
After leaving it on the monitor for nearly 24 hours it looks like everything is going through fine. Here's my first and last monitor logs.
Connecting...
Connected
HTTP/1.1 200 OK
Content-Type: text/html; charset=UTF-8
Server: Microsoft-IIS/8.5
X-Powered-By: PHP/5.6.24
Date: Mon, 22 Oct 2018 23:53:10 GMT
Connection: close
Content-Length: 0
Data: 0
Header: 0
Disconnected
Portal Call
Data Sent
HTTP/1.1 200 OK
Cache-Control: private
Content-Type: text/html; charset=utf-8
Server: Microsoft-IIS/8.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Date: Tue, 23 Oct 2018 06:58:08 GMT
Connection: close
Content-Length: 4
DoneDisconnected
--------------------------------------------------------------------
Portal Call
Data Sent
HTTP/1.1 200 OK
Cache-Control: private
Content-Type: text/html; charset=utf-8
Server: Microsoft-IIS/8.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Date: Wed, 24 Oct 2018 05:42:50 GMT
Connection: close
Content-Length: 4
DoneDisconnected
Connecting...
Connected
HTTP/1.1 200 OK
Content-Type: text/html; charset=UTF-8
Server: Microsoft-IIS/8.5
X-Powered-By: PHP/5.6.24
Date: Tue, 23 Oct 2018 22:42:53 GMT
Connection: close
Content-Length: 0
Data: 0
Header: 0
Disconnected
So it looks like something with the code is causing the problem. What should my next steps be?
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.Star();
}
void loop()
{
ReefAngel.Network.Cloud();
// This should always be the last line
ReefAngel.ShowTouchInterface();
}
After leaving it on the monitor for nearly 24 hours it looks like everything is going through fine. Here's my first and last monitor logs.
Connecting...
Connected
HTTP/1.1 200 OK
Content-Type: text/html; charset=UTF-8
Server: Microsoft-IIS/8.5
X-Powered-By: PHP/5.6.24
Date: Mon, 22 Oct 2018 23:53:10 GMT
Connection: close
Content-Length: 0
Data: 0
Header: 0
Disconnected
Portal Call
Data Sent
HTTP/1.1 200 OK
Cache-Control: private
Content-Type: text/html; charset=utf-8
Server: Microsoft-IIS/8.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Date: Tue, 23 Oct 2018 06:58:08 GMT
Connection: close
Content-Length: 4
DoneDisconnected
--------------------------------------------------------------------
Portal Call
Data Sent
HTTP/1.1 200 OK
Cache-Control: private
Content-Type: text/html; charset=utf-8
Server: Microsoft-IIS/8.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Date: Wed, 24 Oct 2018 05:42:50 GMT
Connection: close
Content-Length: 4
DoneDisconnected
Connecting...
Connected
HTTP/1.1 200 OK
Content-Type: text/html; charset=UTF-8
Server: Microsoft-IIS/8.5
X-Powered-By: PHP/5.6.24
Date: Tue, 23 Oct 2018 22:42:53 GMT
Connection: close
Content-Length: 0
Data: 0
Header: 0
Disconnected
So it looks like something with the code is causing the problem. What should my next steps be?
Re: RA* Unable to Update via Remote Upload
Sorry for the delay.
Yeap, looks like something in your code.
Let's start by adding a few things and seeing if it holds up.
I removed the DCPump stuff.
See if this works now.
I noticed that you had both LED dimming and DCPump control using the same channels.
Yeap, looks like something in your code.
Let's start by adding a few things and seeing if it holds up.
Code: Select all
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
ReefAngel.Star();
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = 0;
ReefAngel.FeedingModePortsE[0] = Port2Bit | Port8Bit;
ReefAngel.FeedingModePortsE[1] = 0;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = 0;
ReefAngel.WaterChangePortsE[0] = Port1Bit | Port2Bit | Port4Bit | Port5Bit | Port8Bit;
ReefAngel.WaterChangePortsE[1] = 0;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = 0;
ReefAngel.OverheatShutoffPortsE[0] = Port4Bit | Port6Bit;
ReefAngel.OverheatShutoffPortsE[1] = 0;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = 0;
ReefAngel.LightsOnPortsE[0] = 0;
ReefAngel.LightsOnPortsE[1] = 0;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Set the Overheat temperature setting
InternalMemory.OverheatTemp_write( 830 );
// Feeeding and Water Change mode speed
// Ports that are always on
ReefAngel.Relay.On( Box1_Port5 );
ReefAngel.Relay.On( Box1_Port8 );
////// Place additional initialization code below here
////// Place additional initialization code above here
}
void loop()
{
ReefAngel.DosingPumpRepeat( Box1_Port1,0,60,83 );//Alk
ReefAngel.SingleATO( true,Box1_Port2,1000,0 );//ATO
ReefAngel.DosingPumpRepeat( Box1_Port3,30,60,82 );//Cal
ReefAngel.StandardHeater( T1_PROBE,Box1_Port4,780,785 );
ReefAngel.StandardLights( Box1_Port6,12,0,19,0 ); //T5
ReefAngel.StandardLights( Box1_Port7,23,0,6,0 ); //Refugium Lights
ReefAngel.PWM.SetDaylight( PWMSlope( 9,0,17,0,15,70,60,0 ) );
ReefAngel.PWM.SetActinic( PWMSlope( 9,0,17,0,15,70,60,0 ) );
ReefAngel.PWM.SetDaylight2( PWMSlope( 9,0,17,0,15,70,60,0 ) );
ReefAngel.PWM.SetActinic2( PWMSlope( 9,0,17,0,15,70,60,0 ) );
boolean buzzer=false;
if ( ReefAngel.isATOTimeOut() ) buzzer=true;
if ( ReefAngel.isOverheat() ) buzzer=true;
if ( buzzer ) ReefAngel.BuzzerOn(2); else ReefAngel.BuzzerOff();
////// Place your custom code below here
static unsigned long feeding;
if (ReefAngel.DisplayedMenu==FEEDING_MODE) feeding=now();
//vacation mode
if (hour()==17 && minute()==0 && second()==0)
{
ReefAngel.FeedingModeStart();
}
if (hour() >= 8 || ReefAngel.Params.PH > 860)
{
ReefAngel.Relay.Off (Box1_Port1);
ReefAngel.Relay.Off (Box1_Port3);
}
////// Place your custom code above here
ReefAngel.Network.Cloud();
// This should always be the last line
ReefAngel.ShowTouchInterface();
}
See if this works now.
I noticed that you had both LED dimming and DCPump control using the same channels.
Roberto.