Page 1 of 1

Restore RA+

Posted: Mon Aug 12, 2019 6:40 am
by Paul_Velasco
So my RA+ took a dump, got a new board.
Is there anything I need to know before I reload everything from a backup?

Also, if I decide a new cloud controller is in the works do I have to recode everything when switching from an RA+?

Re: Restore RA+

Posted: Mon Aug 12, 2019 7:04 pm
by binder
Paul_Velasco wrote:So my RA+ took a dump, got a new board.
Is there anything I need to know before I reload everything from a backup?

Also, if I decide a new cloud controller is in the works do I have to recode everything when switching from an RA+?
if you jump up to the RA Star, there's a few things that you have to change to make it work. it's not bad though, pretty straight forward.

Sent from my Pixel 2 using Tapatalk

Re: Restore RA+

Posted: Tue Aug 13, 2019 7:46 am
by Paul_Velasco
Well that did not work? Board is not lighting up. Think something shorted out. Is there are replaceable fuse somewhere on the board? Or Relay Modules?

When I plug in the Relay module to the controller I get a clicking but no power to the RA+

Re: Restore RA+

Posted: Tue Aug 13, 2019 8:59 am
by rimai
There is no fuse.

Re: Restore RA+

Posted: Tue Aug 13, 2019 12:13 pm
by Paul_Velasco
Any suggestions on a fix? Or did I blow another board up?

Re: Restore RA+

Posted: Tue Aug 13, 2019 7:30 pm
by rimai
It could be the relay box.
Do you have a universal relay box or a relay expansion module+relay box as Box1?

Re: Restore RA+

Posted: Thu Aug 15, 2019 10:23 am
by Paul_Velasco
Have this:

relay expansion module+relay box as Box1

So two boxes

Re: Restore RA+

Posted: Thu Aug 15, 2019 10:25 am
by rimai
Ok, so swap relay boxes and see if the head unit turns on.