Custom Variable based on I/O value

Do you have a question on how to do something.
Ask in here.
Post Reply
ucez
Posts: 89
Joined: Mon Jun 22, 2015 5:58 am

Custom Variable based on I/O value

Post by ucez »

Using a float switch on the I/O, would like to get an email when the switch is activated. Thought it would be easiest to set a custom variable, then report via portal using;

ReefAngel.CustomVar[0]= ReefAngel.IO.GetChannel(0);

However, not getting any response from portal. Tried setting the portal value to 0 and 1. Thoughts?
ucez
Posts: 89
Joined: Mon Jun 22, 2015 5:58 am

Re: Custom Variable based on I/O value

Post by ucez »

NVM working fine, guess I didn't give it long enough...
Post Reply