How to connect your Jebao pump to your Reef Angel

Would you like to help?
Share your walkthrough tutorial with others
User avatar
Posts: 1833
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL
PostPosted: Fri Mar 14, 2014 5:41 am
This end goes to the Power supply that came with the Jebao and the power supply can plug into any outlet, It doesn't need to plug into a relay.

Image

This end connects to the pump.

Image

This end connects to one of your dimming ports.

Image

Posts: 9
Joined: Sun May 25, 2014 5:09 pm
Location: Rio de Janeiro, Brasil
PostPosted: Sun Jun 22, 2014 4:50 pm
Is the Jebao connector an ordinary female circular connector aka MIKE connector?
User avatar
Posts: 1833
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL
PostPosted: Sun Jun 22, 2014 4:54 pm
No. It's a waterproof connection and it screws together.

A Mic or XLR connection snaps together and has a little button to release it.

Sent from my HTC One VX using Tapatalk

Posts: 9
Joined: Sun May 25, 2014 5:09 pm
Location: Rio de Janeiro, Brasil
PostPosted: Sun Jun 22, 2014 8:27 pm
Oh, didn't know that. Thanks for the explanation. Now tell men will this connector fit?

http://www.ebay.com/itm/171352441384
or
http://www.ebay.com/itm/171344249805

They look like the same, but the first is 0.3mm2 and the second is 0.75mm2.
User avatar
Posts: 1833
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL
PostPosted: Mon Jun 23, 2014 6:11 am
The 2nd one looks correct.
There is a link to it on here somewhere.
I definitely know there is one on Reef Central in this 100+ page thread somewhere.
http://www.reefcentral.com/forums/showt ... t=2259644&

Posts: 98
Joined: Sun Jul 21, 2013 8:18 am
PostPosted: Mon Jun 23, 2014 7:39 am
The correct one is here.

http://www.ebay.com/itm/5pcsX-3x0-75-SQ ... 2ed24cddd8
Image
User avatar
Posts: 1833
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL
PostPosted: Mon Jun 23, 2014 7:43 am
Yes, that's it.
Thank davaraj

Posts: 9
Joined: Sun May 25, 2014 5:09 pm
Location: Rio de Janeiro, Brasil
PostPosted: Mon Jun 23, 2014 9:45 am
Thank you very much, people!

Posts: 7
Joined: Mon Jun 30, 2014 10:02 am
PostPosted: Mon Jun 30, 2014 10:08 am
Hi, I was wondering if you could give a little more detail here or perhaps a wiring diagram?

It would be helpful to see a shot of the entire setup in a connected state.

Much thanks,
Rob
User avatar
Posts: 1833
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL
PostPosted: Mon Jun 30, 2014 10:48 am
Are looking to understand how to connect i to the RA and the pump or are you trying to figure out how to make one?

This is the schematic that Roberto put up for the boards when he first made them.

Image

It's kind of hard to get a shot of it in it's connected state with all the gear under my cabinet.

It's pretty simple to connect.
Next

Return to Tutorials

Who is online

Users browsing this forum: No registered users and 2 guests

cron