Ph cal

Would you like to help?
Share your walkthrough tutorial with others
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Ph cal

Post by rimai »

Does not look right.
Is the glass bulb in the tip of the pH probe intact?
Roberto.
beaker77
Posts: 6
Joined: Tue Mar 20, 2012 6:16 pm
Location: Columbia, IL

Re: Ph cal

Post by beaker77 »

OMG, There isn't a glass bulb on my probe.
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Ph cal

Post by rimai »

You got PM
Roberto.
User avatar
J_C
Posts: 49
Joined: Thu Feb 16, 2012 12:07 am

Re: Ph cal

Post by J_C »

Calibrated to pH 4(244, adjusted to 544 via phone app) and pH 10(840, don't know what to adjust to since I can only go to 1024). Been playing with the numbers and I can't really find my sweet spot. It's read from 6.6 to 8.9. The only other way to check pH is a redsea kit, showing 7.8. What am I doing wrong? Adjusting all from the phone app.

I let the probe sit in the solutions roughly 10 min (I was worried about the temp variations so I cut it down a little), rinsed between solutions also.
Last edited by J_C on Tue Apr 10, 2012 9:22 am, edited 1 time in total.
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Ph cal

Post by rimai »

544 for pH7 and 840 for pH10 seem correct numbers.
Roberto.
User avatar
J_C
Posts: 49
Joined: Thu Feb 16, 2012 12:07 am

Re: Ph cal

Post by J_C »

The issue is that those settings make my pH read ~6.6
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Ph cal

Post by rimai »

What were the numbers you got for pH4 and pH9?
Roberto.
User avatar
J_C
Posts: 49
Joined: Thu Feb 16, 2012 12:07 am

Re: Ph cal

Post by J_C »

I calibrated to 4 and 10. I got 244 and 840, respectively.
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Ph cal

Post by rimai »

Oh, one other thing. Doing through the phone, Client or any app will require you to reboot the controller after you save the numbers.
Roberto.
User avatar
J_C
Posts: 49
Joined: Thu Feb 16, 2012 12:07 am

Re: Ph cal

Post by J_C »

Thanks, rebooting now

Reading 7.6
RedSea is currently reading 7.8

Changed the pH10 to 740, the RA is reading 7.87 now...fixed
Image
pilonstar
Posts: 64
Joined: Tue Mar 20, 2012 2:56 am

Re: Ph cal

Post by pilonstar »

hi everyone!
I am a bit slow thinking and i don't get it :(
so i got Ph9 and PH 7 from Dupla because nobody sells 10, i was looking all around australia and nothing
with 10 calibration...
so if anyone knows how to setup with 9?
7 is all good but 9 :?

sorry for the silly question and thanks heaps in advance.

cheers.
Slow down to speed up
Image
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Ph cal

Post by rimai »

Just go ahead and go through the calibration with 7 and 9.
Write down the numbers you are getting on the calibration process.
It's just simple interpolation.
Post those numbers and I'll help you with that.
Roberto.
pilonstar
Posts: 64
Joined: Tue Mar 20, 2012 2:56 am

Re: Ph cal

Post by pilonstar »

i haven't calibrated it but i did put in the water just for test and :shock: it's giving me 7.9 at night 8.1 all morning.
i think is more or less accurate, so i will wait till receive the 10 ph from overseas.
thanks a lot.
:)

cheers!

Erick
Slow down to speed up
Image
Image
lucho84
Posts: 3
Joined: Fri Apr 27, 2012 3:53 pm

Re: Ph cal

Post by lucho84 »

hola gente necesito ayuda me estoy volviendo loco no puedo calibrar la zonda de ph
primero pongo la zonda en agua
entro al menu calibrar ph
pongo la zonda en el ph 7

lo dejo unos 3 o 4 minutos

luego enjuago la zonda en agua
la pongo en la zonda 10
espero unos 3 o 4 minutos

luego le doy ok

y mide cualquier cosa


las medidas que me da del ph

zona en liquido ph 7: 479

zonda en liquido ph 10: 500
pilonstar
Posts: 64
Joined: Tue Mar 20, 2012 2:56 am

Re: Ph cal

Post by pilonstar »

Si puedes tomar nota de los resultados cuando lo pones en Ph 7 y despues los resultados con Ph 10
una vez los tengas postealos por aqui.
Yo lo que no hice es no darle al okay, le di a cancelar y luego lo programe en la memoria via wifi.
De todos modos que resultados te da?
saludos.
Slow down to speed up
Image
Image
lucho84
Posts: 3
Joined: Fri Apr 27, 2012 3:53 pm

Re: Ph cal

Post by lucho84 »

probe la zonda en otro medidor de ph y tira cualquier cosa, asi que supongo que el problema es la zonda... me voy a comprar otra zonda y probare a ver si con eso sale andando.

saludos
User avatar
J_C
Posts: 49
Joined: Thu Feb 16, 2012 12:07 am

Re: Ph cal

Post by J_C »

Le puedes mandar un PM a Roberto, el te manda una zonda nueva.
Tus números no se miran bien, el pH 10 usualmente esta en los 8xx.
No te olvides de sacar el enchufe para acer un reset.
Image
Post Reply