Page 2 of 3
Re: Ph cal
Posted: Mon Apr 02, 2012 7:13 pm
by rimai
Does not look right.
Is the glass bulb in the tip of the pH probe intact?
Re: Ph cal
Posted: Mon Apr 02, 2012 7:18 pm
by beaker77
OMG, There isn't a glass bulb on my probe.
Re: Ph cal
Posted: Mon Apr 02, 2012 7:22 pm
by rimai
You got PM
Re: Ph cal
Posted: Mon Apr 09, 2012 10:53 pm
by J_C
Calibrated to pH 4(244, adjusted to 544 via phone app) and pH 10(840, don't know what to adjust to since I can only go to 1024). Been playing with the numbers and I can't really find my sweet spot. It's read from 6.6 to 8.9. The only other way to check pH is a redsea kit, showing 7.8. What am I doing wrong? Adjusting all from the phone app.
I let the probe sit in the solutions roughly 10 min (I was worried about the temp variations so I cut it down a little), rinsed between solutions also.
Re: Ph cal
Posted: Tue Apr 10, 2012 7:44 am
by rimai
544 for pH7 and 840 for pH10 seem correct numbers.
Re: Ph cal
Posted: Tue Apr 10, 2012 9:21 am
by J_C
The issue is that those settings make my pH read ~6.6
Re: Ph cal
Posted: Tue Apr 10, 2012 9:42 am
by rimai
What were the numbers you got for pH4 and pH9?
Re: Ph cal
Posted: Tue Apr 10, 2012 10:48 am
by J_C
I calibrated to 4 and 10. I got 244 and 840, respectively.
Re: Ph cal
Posted: Tue Apr 10, 2012 10:52 am
by rimai
Oh, one other thing. Doing through the phone, Client or any app will require you to reboot the controller after you save the numbers.
Re: Ph cal
Posted: Tue Apr 10, 2012 11:08 am
by J_C
Thanks, rebooting now
Reading 7.6
RedSea is currently reading 7.8
Changed the pH10 to 740, the RA is reading 7.87 now...fixed
Re: Ph cal
Posted: Wed Apr 18, 2012 10:56 pm
by pilonstar
hi everyone!
I am a bit slow thinking and i don't get it
so i got Ph9 and PH 7 from Dupla because nobody sells 10, i was looking all around australia and nothing
with 10 calibration...
so if anyone knows how to setup with 9?
7 is all good but 9
sorry for the silly question and thanks heaps in advance.
cheers.
Re: Ph cal
Posted: Thu Apr 19, 2012 7:18 am
by rimai
Just go ahead and go through the calibration with 7 and 9.
Write down the numbers you are getting on the calibration process.
It's just simple interpolation.
Post those numbers and I'll help you with that.
Re: Ph cal
Posted: Sat Apr 21, 2012 2:25 am
by pilonstar
i haven't calibrated it but i did put in the water just for test and
it's giving me 7.9 at night 8.1 all morning.
i think is more or less accurate, so i will wait till receive the 10 ph from overseas.
thanks a lot.
cheers!
Erick
Re: Ph cal
Posted: Wed May 02, 2012 7:08 pm
by lucho84
hola gente necesito ayuda me estoy volviendo loco no puedo calibrar la zonda de ph
primero pongo la zonda en agua
entro al menu calibrar ph
pongo la zonda en el ph 7
lo dejo unos 3 o 4 minutos
luego enjuago la zonda en agua
la pongo en la zonda 10
espero unos 3 o 4 minutos
luego le doy ok
y mide cualquier cosa
las medidas que me da del ph
zona en liquido ph 7: 479
zonda en liquido ph 10: 500
Re: Ph cal
Posted: Thu May 03, 2012 3:19 am
by pilonstar
Si puedes tomar nota de los resultados cuando lo pones en Ph 7 y despues los resultados con Ph 10
una vez los tengas postealos por aqui.
Yo lo que no hice es no darle al okay, le di a cancelar y luego lo programe en la memoria via wifi.
De todos modos que resultados te da?
saludos.
Re: Ph cal
Posted: Thu May 03, 2012 6:10 pm
by lucho84
probe la zonda en otro medidor de ph y tira cualquier cosa, asi que supongo que el problema es la zonda... me voy a comprar otra zonda y probare a ver si con eso sale andando.
saludos
Re: Ph cal
Posted: Tue May 15, 2012 12:23 am
by J_C
Le puedes mandar un PM a Roberto, el te manda una zonda nueva.
Tus nĂºmeros no se miran bien, el pH 10 usualmente esta en los 8xx.
No te olvides de sacar el enchufe para acer un reset.