Web Banners

Would you like to help?
Share your walkthrough tutorial with others
User avatar
Xender
Posts: 105
Joined: Sun Mar 20, 2011 12:38 am
Location: France

Re: Web Banners

Post by Xender »

I've got a little pb.

When one off my relay is OFF, the web banner is displaying the green LED on the relay.
The portal is OK with "OFF" on this relay.

Other question :
The time seems to be little different on the web banner than the last update of the portal. Normal?
Off course I try to refresh the image after the next update of the banner but it didn't change.

The web banner is taking the portal information or the direct live RA?

Thx
Fresh Water Aquarium 180*60*80
Salt Water Aquarium 60*60*60
Click Here to see the Video of my Fresh Water Aquarium
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Web Banners

Post by rimai »

The webbanner will always get the stored value that was sent to the server.
If you are running the Portal on live mode, you will see the difference in time and momentary differences on the relays if they just happened.
The Portal on live mode refreshes every 10 seconds, while the webbanner refreshes every 5 minutes.
Roberto.
User avatar
Xender
Posts: 105
Joined: Sun Mar 20, 2011 12:38 am
Location: France

Re: Web Banners

Post by Xender »

The relay didn't change last hour.

Pb with the Heater
Banner ON
Portal OFF
Iphone OFF

sometimes it say "AUTO" but rare.

Image
Image
Image
Fresh Water Aquarium 180*60*80
Salt Water Aquarium 60*60*60
Click Here to see the Video of my Fresh Water Aquarium
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Web Banners

Post by rimai »

Is it only on the portal or your banner on your signature also doesn't update?
It seems the banner on your signature is updating just fine.
I think it may be that the portal is caching the image.
If you click the link the portal is showing below the banner, it should open up a new page with the banner.
Does this new page also show wrong data?
Roberto.
User avatar
Xender
Posts: 105
Joined: Sun Mar 20, 2011 12:38 am
Location: France

Re: Web Banners

Post by Xender »

Since 2 days my Heater relay is "OFF"

But as you can see the heater relay is showing "ON" on the banner and on the link :

http://forum.reefangel.com/status/banne ... Xender&t=1
Image

Dash Borad is showing Heater "OFF"
Fresh Water Aquarium 180*60*80
Salt Water Aquarium 60*60*60
Click Here to see the Video of my Fresh Water Aquarium
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Web Banners

Post by rimai »

I do see now what the problem is.
The reason is that the web banner is not handling the override on nor off properly.
It only shows the auto status.
I have to implement the override on the webbanner code.
Thanks for finding the bug :)
Roberto.
User avatar
Xender
Posts: 105
Joined: Sun Mar 20, 2011 12:38 am
Location: France

Web Banners

Post by Xender »

You're welcome ;-)

By the way, can you prefer ajax than java for the portal module? Java slow down browser.

Like jgraph or other.

Thx
Fresh Water Aquarium 180*60*80
Salt Water Aquarium 60*60*60
Click Here to see the Video of my Fresh Water Aquarium
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Web Banners

Post by rimai »

The whole portal is ajax based.
Roberto.
User avatar
Xender
Posts: 105
Joined: Sun Mar 20, 2011 12:38 am
Location: France

Re: Web Banners

Post by Xender »

ok

Can you add PH on all banner style please?

thx
Fresh Water Aquarium 180*60*80
Salt Water Aquarium 60*60*60
Click Here to see the Video of my Fresh Water Aquarium
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Web Banners

Post by rimai »

They should be there. Which one does not have?
Roberto.
User avatar
Xender
Posts: 105
Joined: Sun Mar 20, 2011 12:38 am
Location: France

Re: Web Banners

Post by Xender »

Fresh Water Aquarium 180*60*80
Salt Water Aquarium 60*60*60
Click Here to see the Video of my Fresh Water Aquarium
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Web Banners

Post by rimai »

Wow...
Thanks for letting me know.
Never realized it was missing.
That was Lukeluke request of miniature banner and he's never said anything to me either :(
Roberto.
User avatar
Xender
Posts: 105
Joined: Sun Mar 20, 2011 12:38 am
Location: France

Re: Web Banners

Post by Xender »

lol!
This miniature is simply and nice (small size) for me and should be the default signature forum I think, but without PH it's too bad ;-)

thx
Fresh Water Aquarium 180*60*80
Salt Water Aquarium 60*60*60
Click Here to see the Video of my Fresh Water Aquarium
Image
User avatar
Xender
Posts: 105
Joined: Sun Mar 20, 2011 12:38 am
Location: France

Re: Web Banners

Post by Xender »

Yes ! It's Working for relay and PH! Thx !
http://forum.reefangel.com/status/banne ... Xender&t=1
Fresh Water Aquarium 180*60*80
Salt Water Aquarium 60*60*60
Click Here to see the Video of my Fresh Water Aquarium
Image
User avatar
J_C
Posts: 49
Joined: Thu Feb 16, 2012 12:07 am

Re: Web Banners

Post by J_C »

Is there a way to turn off unused temps? I guess I could always get more temp probes, but even then I'll only use 2.
Image
binder
Posts: 2871
Joined: Fri Mar 18, 2011 6:20 pm
Location: Illinois
Contact:

Re: Web Banners

Post by binder »

J_C wrote:Is there a way to turn off unused temps? I guess I could always get more temp probes, but even then I'll only use 2.
On the banners, no. You would just put an N/A or something for the label to ignore them.
alexwbush
Posts: 327
Joined: Tue Mar 22, 2011 12:45 am
Location: San Diego, CA

Re: Web Banners

Post by alexwbush »

J_C wrote:Is there a way to turn off unused temps? I guess I could always get more temp probes, but even then I'll only use 2.
Or just monitor other things. Why not? The RA comes with 3 temp probes, might as well know what your room temperature and cabinet or sump temperature is. Then if your main temp ever failed, you'd know right away seeing the display and sump (or HOB filter, etc) temperatures drastically different.
Paulturner911
Posts: 288
Joined: Wed Jan 23, 2013 12:36 pm

Re: Web Banners

Post by Paulturner911 »

Quick question about time on banner 4. Ive seen people mentioning +14 within the code for time adjustments. I have done nothing to my RA+ for the web banner, just cut and pasted the code as image and changed Robertos name to my own...But my time is 5hrs off. Is there something within my RA+ code I would have to do to correct this? I guess its not a huge deal, I only see it on here, but I would be nice to fix it.
Image
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Web Banners

Post by lnevo »

I think it's an http flag you have to add when your using the banner...not sure what the exact code is..
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Web Banners

Post by lnevo »

&t=

Then add -5 or whatever your offset from UTC

http://forum.reefangel.com/viewtopic.php?p=550#p550

Edited for correctness to avoid confusion
Paulturner911
Posts: 288
Joined: Wed Jan 23, 2013 12:36 pm

Re: Web Banners

Post by Paulturner911 »

Lets check. I have the following
http://forum.reefangel.com/status/banne ... 11&time=-5


Edit...Thas not right
Again
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Web Banners

Post by rimai »

Roberto.
Paulturner911
Posts: 288
Joined: Wed Jan 23, 2013 12:36 pm

Re: Web Banners

Post by Paulturner911 »

I had time spelled out, I think it was on the first page to the thread.

Thanks
Image
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Web Banners

Post by rimai »

Thanks :)
I fixed that post.
Roberto.
brettb
Posts: 17
Joined: Tue Apr 02, 2013 6:48 am

Re: Web Banners

Post by brettb »

What are the chances of having the water level displayed on the web banners? For those who have water level sensors.
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Web Banners

Post by rimai »

Yeah, I can work on that...
Roberto.
brettb
Posts: 17
Joined: Tue Apr 02, 2013 6:48 am

Re: Web Banners

Post by brettb »

Great stuff, Would be great to have. Water level is always a good indication of something gone wrong in a tank. My level expansion is on the way =)
Thanks!
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Web Banners

Post by rimai »

Done
Roberto.
brettb
Posts: 17
Joined: Tue Apr 02, 2013 6:48 am

Re: Web Banners

Post by brettb »

That is great! Thanks Roberto!
paulvisco
Posts: 53
Joined: Fri May 17, 2013 2:27 am

Re: Web Banners

Post by paulvisco »

Do you have a temlplate that one could work from (code) to generate a diffrent banner. i have a few ideas that i would like ot play with but...

having the backend code that generates the image is needed.. is it open or closed source..
Image
Post Reply