wave pump started by hour and minutes instead wavemaker func

Would you like to help?
Share your walkthrough tutorial with others

Posts: 14
Joined: Tue Mar 22, 2011 12:56 pm
PostPosted: Tue Mar 22, 2011 1:08 pm
hi! i would like to share a great roberto contribution.
since i don't like wavemaker function ( i prefer use 2 pumps alterating every 6 hours) here is a simple workaround:


roberto wrote:
Just because it says standardlight doesn't mean it should only be used for lights.
You could use it like this:
ReefAngel.StandardLights(Relay4,6,0,12,0);
if (bitRead(ReefAngel.Relay.RelayData,Relay4)==0) ReefAngel.StandardLights(Relay4,18,0,0,0);
Try it and let me know if it works.
Roberto.

this will power up relay4 from 6:00 am to 12:00am and from 6:00pm to 12:00pm
doing the same with another relay will alternate 2 pumps every 6 hours...
it works well!
thanks!
Last edited by mantu on Wed Mar 23, 2011 1:16 am, edited 1 time in total.

Posts: 327
Joined: Tue Mar 22, 2011 12:45 am
Location: San Diego, CA
PostPosted: Tue Mar 22, 2011 2:04 pm
should that read StandardLights?

Posts: 14
Joined: Tue Mar 22, 2011 12:56 pm
PostPosted: Tue Mar 22, 2011 3:51 pm
alexwbush wrote:should that read StandardLights?


i don't understand you.. sorry...

Posts: 12327
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Tue Mar 22, 2011 5:17 pm
mantu wrote:i don't understand you.. sorry...

There was a typo on your post. That's all.
You typed StandarLights and he was saying it should've been StandardLights.
Roberto.

Posts: 327
Joined: Tue Mar 22, 2011 12:45 am
Location: San Diego, CA
PostPosted: Tue Mar 22, 2011 5:21 pm
I was just trying to clear it up in case someone copied and pasted and then was wondering why it might not work.

Thanks for posting!

Posts: 14
Joined: Tue Mar 22, 2011 12:56 pm
PostPosted: Wed Mar 23, 2011 1:16 am
alexwbush wrote:I was just trying to clear it up in case someone copied and pasted and then was wondering why it might not work.

Thanks for posting!



i'm sorry! i just edited original post!
tnx!

Lorenzo

Return to Tutorials

Who is online

Users browsing this forum: Google [Bot] and 1 guest

cron