Start unit without ph probe attached?

New members questions
Post Reply
scootscomputes
Posts: 12
Joined: Tue Sep 25, 2012 2:57 pm

Start unit without ph probe attached?

Post by scootscomputes »

Hello, Bran Newbe. Quick question. Just rcvd My RA. Want to start it up. Can I start the unit without the Ph probe plugged in? Just want to start it up. Look at temp. Play around for a while...... I have no Ph buffer. Or should I plug it in but not remove from shipping solution? Thanks
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Start unit without ph probe attached?

Post by rimai »

You can use it with or without...
Roberto.
scootscomputes
Posts: 12
Joined: Tue Sep 25, 2012 2:57 pm

Re: Start unit without ph probe attached?

Post by scootscomputes »

wow thanks Roberto. I'm excited....
scootscomputes
Posts: 12
Joined: Tue Sep 25, 2012 2:57 pm

Re: Start unit without ph probe attached?

Post by scootscomputes »

Heres what I have.power to relay unit. cable fm relay to controller attached. Temp probe connected. Controller screen shows blank graph. T1 temp 76.5 Ph 8.51 T2 error DP17. T3 error ap18. shows 8 relay status lights red or green with various relays turning off and on. Joy stick has no effect on screen.
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Start unit without ph probe attached?

Post by rimai »

Everything looks good.
If you want to know more about the preloaded code, download the user manual.
Press the joystick to access the menu.
Roberto.
scootscomputes
Posts: 12
Joined: Tue Sep 25, 2012 2:57 pm

Re: Start unit without ph probe attached?

Post by scootscomputes »

The Joy stick doesn't move the screen...
Last edited by scootscomputes on Tue Oct 09, 2012 5:05 pm, edited 1 time in total.
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Start unit without ph probe attached?

Post by rimai »

There is nothing to move. There is only one screen.
If you press it, you can access the menu.
Roberto.
scootscomputes
Posts: 12
Joined: Tue Sep 25, 2012 2:57 pm

Re: Start unit without ph probe attached?

Post by scootscomputes »

Ok Press it down. I was moving it in the down direction. Sry
Post Reply