Error Uploading

New members questions
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Error Uploading

Post by rimai »

Did you check if you have the correct board selected under menu Tools->Board and also the correct COM port under menu Tools->Serial Port?
Roberto.
mason dixon
Posts: 26
Joined: Mon May 14, 2012 6:19 am

Re: Error Uploading

Post by mason dixon »

Got it working, didn't know I had to upload the memory file.
dapg8gt
Posts: 104
Joined: Tue Apr 16, 2013 7:33 pm
Location: 650 Bay Area..

Re: Error Uploading

Post by dapg8gt »

smoothdog wrote:I am getting this error when trying to upload the InitialInternalMemory on my new RA+. I have selected the correct board, the correct COM port and Checked the cable at least 3 times to make sure it is plugged in properly (black wire to the outside right pin):

The following features were automatically added:
Watchdog Timer
Version Menu

The following features were detected:
Simple Menu
Binary sketch size: 7,420 bytes (of a 258,048 byte maximum)
C:\Program Files (x86)\Reef Angel Controller\hardware/tools/avr/bin/avrdude -CC:\Program Files (x86)\Reef Angel Controller\hardware/tools/avr/etc/avrdude.conf -v -v -v -v -patmega2560 -cstk500v2 -P\\.\COM5 -b115200 -D -Uflash:w:C:\Users\SMOOTH~1\AppData\Local\Temp\build9041109765076733720.tmp\InitialInternalMemory.cpp.hex:i

avrdude: Version 6.0, compiled on Apr 6 2012 at 19:29:19
Copyright (c) 2000-2005 Brian Dean,
Copyright (c) 2007-2009 Joerg Wunsch

System wide configuration file is "C:\Program Files (x86)\Reef Angel Controller\hardware/tools/avr/etc/avrdude.conf"

Using Port : \\.\COM5
Using Programmer : stk500v2
Overriding Baud Rate : 115200
Rebooting Reef Angel Controller
avrdude: Send: . [1b] . [01] . [00] . [01] . [0e] . [01] . [14]
avrdude: Recv:
avrdude: stk500v2_ReceiveMessage(): timeout
avrdude: stk500v2_getsync(): timeout communicating with programmer

avrdude done. Thank you.
This is exactly what I have been getting for the last few hours I have tried to reinstall the software,double checking com port and board, reverting back to default coding ETC.. all I get is the red code at the bottom similar to this all I .. this is my first time trying to use it and have been combing the forum to find a fix without posting but I am at witts end LOL.. Not sure whats going on but the pin is def in the right area and the wizard code verifies and the screen blinks on reboot I will keep trying and hoping I figure it out.
My other hobby has 450rwhp and eats tires instead of mysis!
dapg8gt
Posts: 104
Joined: Tue Apr 16, 2013 7:33 pm
Location: 650 Bay Area..

Re: Error Uploading

Post by dapg8gt »

Here is the screen shot. please tell me what the issue is thanks.. I know im new but ive been trying everything I can find to fix this issue and get my RA online unsuccessfully..

Dang I don't know why that IS sooo big. should I be doing it as a jpeg instead? I can change it if needed..sorry
Attachments
reef angel issue
reef angel issue
Capture.PNG (113.33 KiB) Viewed 4738 times
My other hobby has 450rwhp and eats tires instead of mysis!
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Error Uploading

Post by rimai »

Do you have RA+?
Roberto.
dapg8gt
Posts: 104
Joined: Tue Apr 16, 2013 7:33 pm
Location: 650 Bay Area..

Re: Error Uploading

Post by dapg8gt »

Yes I have the plus. I made sure it was checked in the box along with the right com port.
My other hobby has 450rwhp and eats tires instead of mysis!
Post Reply