T1,T2 and T3 Error

New members questions
Post Reply
cjrudy
Posts: 135
Joined: Sat Nov 10, 2012 2:47 pm

T1,T2 and T3 Error

Post by cjrudy »

Setting up my Reef angel for the first time (Xmas present from the wife) and I am getting errors on T1, T2 and T3. I tried plugging the temperature probe into each with the same result.
rossbryant1956
Posts: 471
Joined: Sat Jan 14, 2012 2:08 pm
Location: Montgomery Village, MD

Re: T1,T2 and T3 Error

Post by rossbryant1956 »

plug them in and then reset the RA. (unplug and plug back in)
Roscoe's Reefs - Starting Over Again:

Building new 29g Nano after landlord went berserk over my 4 75 gallon tanks, Multiple RA's, Water mixing stations, etc. Your help welcomed in remembering all I've forgotten.
rossbryant1956
Posts: 471
Joined: Sat Jan 14, 2012 2:08 pm
Location: Montgomery Village, MD

Re: T1,T2 and T3 Error

Post by rossbryant1956 »

be very careful with those temp probe plug ends, they are very fragile!
Roscoe's Reefs - Starting Over Again:

Building new 29g Nano after landlord went berserk over my 4 75 gallon tanks, Multiple RA's, Water mixing stations, etc. Your help welcomed in remembering all I've forgotten.
cjrudy
Posts: 135
Joined: Sat Nov 10, 2012 2:47 pm

Re: T1,T2 and T3 Error

Post by cjrudy »

That did it thanks, connection is kind of touchy though.
cjrudy
Posts: 135
Joined: Sat Nov 10, 2012 2:47 pm

Re: T1,T2 and T3 Error

Post by cjrudy »

The temp probe constantly errors out, it will stay on for a bit, then go off. Sometimes the only way to get it back on is to constantly reset. This is a pain
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: T1,T2 and T3 Error

Post by rimai »

Do the wires inside the white connector look ok or they look stripped?
How many probes do you have?
Roberto.
cjrudy
Posts: 135
Joined: Sat Nov 10, 2012 2:47 pm

Re: T1,T2 and T3 Error

Post by cjrudy »

I have a single temp probe, the wires look fine.
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: T1,T2 and T3 Error

Post by rimai »

Maybe you got a bad one.
Try moving it to a different port or see if the problem is a bad connection inside the white plug.
If that doesn't work, PM me for RMA number
Roberto.
Post Reply