Upload PDE/INO via wifi?

New members questions
Post Reply
sf340flier
Posts: 11
Joined: Sat Jan 12, 2013 7:17 pm

Upload PDE/INO via wifi?

Post by sf340flier »

Quick question: When I need to upload a new sketch or change something on my RA, is there any way I can do this via the wifi? It's a little inconvenient to unscrew and remove the relay box and controller so that I can bring the unit next to my desktop.

In the alternative, is there a way to power the RA without the relay box attached?

Anyone have any ideas? Thanks!
Image
Sebyte

Re: Upload PDE/INO via wifi?

Post by Sebyte »

It is not possible to upload code via the wifi unit due to limitations.

The alternative is to use a long USB cable to extend the TTL cable. You can find cables that have a booster built in and I think they go up to 50ft.

As for powering the head unit, you can buy a lead from the RA store, see http://www.reefangel.com/QuickViewUSBPower.html
sf340flier
Posts: 11
Joined: Sat Jan 12, 2013 7:17 pm

Re: Upload PDE/INO via wifi?

Post by sf340flier »

Thanks for the info...exactly what I needed to know!
Image
00Warpig00
Posts: 289
Joined: Wed May 16, 2012 9:52 pm

Re: Upload PDE/INO via wifi?

Post by 00Warpig00 »

If you purchased your RA from Roberto as a new item I believe it ships with the cable needed to power the RA from a USB port (power only via that cable, programming is via TTL USB cable)

Nick
180G FOWLR
20GH QT#1
29G QT#2

Image
sf340flier
Posts: 11
Joined: Sat Jan 12, 2013 7:17 pm

Re: Upload PDE/INO via wifi?

Post by sf340flier »

I did purchase an RA+ from this site. Darn! I already ordered a new power cable, didn't realize they were the same:(

Probably not the last mistake I make!
Image
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Re: Upload PDE/INO via wifi?

Post by lnevo »

It's always good to have a spare.. the cables are a little sensitive... actually the ports are just extra secure :)
User avatar
Sacohen
Posts: 1833
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL

Re: Upload PDE/INO via wifi?

Post by Sacohen »

I had the same question. Found the answer here. Thanks.
One additional part to my question is if use a long USB extension or bring my laptop to the head unit, do I need to power off the Reef Angel to unplug the Wifi adapter and plug in the computer or is it hot swappable?
User avatar
lnevo
Posts: 5430
Joined: Fri Jul 20, 2012 9:42 am

Upload PDE/INO via wifi?

Post by lnevo »

Hot swap
User avatar
Sacohen
Posts: 1833
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL

Re: Upload PDE/INO via wifi?

Post by Sacohen »

Thanks Lee.
User avatar
cosmith71
Posts: 1437
Joined: Fri Mar 29, 2013 3:51 pm
Location: Oklahoma City

Re: Upload PDE/INO via wifi?

Post by cosmith71 »

00Warpig00 wrote:If you purchased your RA from Roberto as a new item I believe it ships with the cable needed to power the RA from a USB port (power only via that cable, programming is via TTL USB cable)

Nick
Edit: RA does not, RA+ apparently does.

I got the RA and upgraded to the RA+. The more I learn, the more I wish I would have started out with the RA+. :cry:
User avatar
DrewPalmer04
Posts: 818
Joined: Tue May 29, 2012 2:12 pm
Location: Christopher, IL

Re: Upload PDE/INO via wifi?

Post by DrewPalmer04 »

Ditto lol
Out for now...but not over.

VISIT: Ethernet Module/Wifi Alternative
Post Reply