Temp display problem

New members questions
Post Reply
Ridwaan
Posts: 32
Joined: Thu Apr 03, 2014 11:37 pm

Temp display problem

Post by Ridwaan »

Hi..

I am new to Reef Angel and spent last night trying to figure it out...
I have managed to upload the code using the wizard but got an error so deleted the lines int he code that gave the error.

Anyways, I loaded the code and when I go ontot he controller itself and go to the temp readings that Ive setttup, its showing totally different values...
Example, I have set the temperature for the heater to switch on at 24.5 but ont he controller is shows 775???

I am now afraid to use this controller.
Yes, I did set it to celcius

please help
binder
Posts: 2871
Joined: Fri Mar 18, 2011 6:20 pm
Location: Illinois
Contact:

Re: Temp display problem

Post by binder »

Can you please post your code that you uploaded so we can look at it?
Ridwaan
Posts: 32
Joined: Thu Apr 03, 2014 11:37 pm

Re: Temp display problem

Post by Ridwaan »

Hi..

Here is my code

Code: Select all

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>

////// Place global variable code below here


////// Place global variable code above here


void setup()
{
    // This must be the first line
    ReefAngel.Init();  //Initialize controller
    ReefAngel.SetTemperatureUnit( Celsius );  // set to Celsius Temperature

    ReefAngel.AddStandardMenu();  // Add Standard Menu

    ReefAngel.Use2014Screen();  // Let's use 2014 Screen 
    ReefAngel.AddPHExpansion();  // pH Expansion Module
    ReefAngel.AddWaterLevelExpansion();  // Water Level Expansion Module
    // Ports toggled in Feeding Mode
    ReefAngel.FeedingModePorts = 0;
    ReefAngel.FeedingModePortsE[0] = 0;
    // Ports toggled in Water Change Mode
    ReefAngel.WaterChangePorts = 0;
    ReefAngel.WaterChangePortsE[0] = 0;
    // Ports toggled when Lights On / Off menu entry selected
    ReefAngel.LightsOnPorts = Port1Bit | Port2Bit | Port3Bit;
    ReefAngel.LightsOnPortsE[0] = 0;
    // Ports turned off when Overheat temperature exceeded
    ReefAngel.OverheatShutoffPorts = Port4Bit | Port5Bit;
    ReefAngel.OverheatShutoffPortsE[0] = 0;
    // Use T1 probe as temperature and overheat functions
    ReefAngel.TempProbe = T1_PROBE;
    ReefAngel.OverheatProbe = T1_PROBE;
    // Set the Overheat temperature setting
    InternalMemory.OverheatTemp_write( 280 );

    // Feeeding and Water Change mode speed
    ReefAngel.DCPump.FeedingSpeed=0;
    ReefAngel.DCPump.WaterChangeSpeed=0;


    // Ports that are always on

    ////// Place additional initialization code below here
    

    ////// Place additional initialization code above here
}

void loop()
{
    ReefAngel.StandardLights( Port1,9,0,19,0 );
    ReefAngel.StandardLights( Port2,9,30,18,15 );
    ReefAngel.StandardLights( Port3,11,0,18,0 );
    ReefAngel.StandardHeater( Port4,245,255 );
    ReefAngel.StandardHeater( Port5,245,255 );
    ReefAngel.StandardFan( Port6,245,265 );
    ReefAngel.StandardATO( Port7,40 );
    ReefAngel.PHControl( Port8,670,650 );
    ReefAngel.DCPump.UseMemory = false;
    ReefAngel.DCPump.SetMode( ReefCrest,100,10 );
    ReefAngel.DCPump.DaylightChannel = None;
    ReefAngel.DCPump.ActinicChannel = None;
    ReefAngel.DCPump.ExpansionChannel[0] = None;
    ReefAngel.DCPump.ExpansionChannel[1] = None;
    ReefAngel.DCPump.ExpansionChannel[2] = None;
    ReefAngel.DCPump.ExpansionChannel[3] = None;
    ReefAngel.DCPump.ExpansionChannel[4] = None;
    ReefAngel.DCPump.ExpansionChannel[5] = None;
    ////// Place your custom code below here
    

    ////// Place your custom code above here

    // This should always be the last line
    ReefAngel.ShowInterface();
}

rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Temp display problem

Post by rimai »

Can you post a photo of the controller screen?
I think your code upload didn't happen.
Roberto.
Post Reply