Walk Through to get you started with RAGen

New members questions
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Walk Through to get you started with RAGen

Post by rimai »

Oh, you are using the correct version of Arduino...
Arduino 1.0 is the most updated one and the one that gets installed using the latest Installer.
Roberto.
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Walk Through to get you started with RAGen

Post by rimai »

Original post has been updated with new videos.
Roberto.
ejn76
Posts: 7
Joined: Sun May 10, 2015 12:18 am

Re: Walk Through to get you started with RAGen

Post by ejn76 »

I imagine that this must have been mentioned before but the link to download the software is wrong. It reads www_reefangel_com/Download.ashx
but should be
www_reefangel_com/Download.asxp
Snowmansnow
Posts: 4
Joined: Thu May 21, 2015 2:50 pm

Re: Walk Through to get you started with RAGen

Post by Snowmansnow »

Does this work on iOS
binder
Posts: 2871
Joined: Fri Mar 18, 2011 6:20 pm
Location: Illinois
Contact:

Re: Walk Through to get you started with RAGen

Post by binder »

Snowmansnow wrote:Does this work on iOS
you cannot run ragen or arduino with the customized ra code on ios.


Sent from my iPad mini
rimai
Posts: 12881
Joined: Fri Mar 18, 2011 6:47 pm

Re: Walk Through to get you started with RAGen

Post by rimai »

Yeah, we have something better now.
It's called Reef Angel Wizard and it will run on Windows, MacOSX and linux.
Roberto.
SMG2383
Posts: 1
Joined: Thu Mar 04, 2021 1:06 am

Re: Walk Through to get you started with RAGen

Post by SMG2383 »

I am in China, because the freight is too much, so I made a pcb board myself, but I can’t upload the files correctly. I power the board separately with 5V, and the three jumpers have been connected. Do I need to connect the jumpers under the screen? Whether to upload the boot file
Post Reply