RA portal charts does not have new data

New members questions

Posts: 12245
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Thu Dec 29, 2016 6:55 pm
Click Options
Choose the serial port connected to your wifi attachment
Choose 57600 baud rate
Click Ok
Click Connect
Type $$$
Roberto.

Posts: 12245
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Thu Dec 29, 2016 6:55 pm
Can you send screenshot of what you get?
Roberto.

Posts: 173
Joined: Fri Dec 26, 2014 6:38 pm
PostPosted: Thu Dec 29, 2016 7:02 pm
this is what I got after following your steps

<4.41>

not sure how to upload screenshots or pics, I'm a computer knob :)
Image

Posts: 12245
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Thu Dec 29, 2016 7:03 pm
There you go. you are in command mode.
Now type the other commands
Roberto.

Posts: 173
Joined: Fri Dec 26, 2014 6:38 pm
PostPosted: Thu Dec 29, 2016 7:15 pm
the following is what I got. now what?

Disconn from Joshua2001,LOST-AP
Auto-Assoc Joshua2001 chan=6 mode=MIXED SCAN OK
Joining Joshua2001 now..
Associated!
DHCP: Start
DHCP in 1798ms, lease=604800s
IF=UP
DHCP=ON
IP=192.168.0.34:2000
NM=255.255.255.0
GW=192.168.0.1
Image

Posts: 12245
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Thu Dec 29, 2016 7:16 pm
That's it
Roberto.

Posts: 173
Joined: Fri Dec 26, 2014 6:38 pm
PostPosted: Thu Dec 29, 2016 7:21 pm
thanks Roberto but the portal still has dec 23rd as the last data for relays and web charts?
Image

Posts: 12245
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Thu Dec 29, 2016 7:39 pm
Then something went wrong.
Connect to the module again and send "get e" command.
Paste the response
Roberto.

Posts: 173
Joined: Fri Dec 26, 2014 6:38 pm
PostPosted: Thu Dec 29, 2016 7:48 pm
I typed "get e" and this was the response

<h1>Bad Request</h1><h1>Bad Request (Invalid URL)</h1>
Image

Posts: 12245
Joined: Fri Mar 18, 2011 6:47 pm
PostPosted: Thu Dec 29, 2016 7:49 pm
You didn't enter cmd mode.
You need to type $$$ to enter command mode or no command will be accepted
Roberto.
PreviousNext

Return to For New Members

Who is online

Users browsing this forum: No registered users and 2 guests

cron