RA portal charts does not have new data
Re: RA portal charts does not have new data
cant open the tera term file on my Mac and I don't see a file for Mac users???
Re: RA portal charts does not have new data
Sorry, tera term is for windows only.
If you want to do it on Mac, you need to use Coolterm and there is no macro option for it.
You will need to manually type it.
Open the serial connection at 57600 baud.
Then type $$$ and it should respond with CMD.
Then type the following commands:
If you want to do it on Mac, you need to use Coolterm and there is no macro option for it.
You will need to manually type it.
Open the serial connection at 57600 baud.
Then type $$$ and it should respond with CMD.
Then type the following commands:
Code: Select all
set i h 104.36.18.155
save
reboot
Roberto.
Re: RA portal charts does not have new data
what is coolterm? and, how do I Open the serial connection at 57600 baud?
im so confused
im so confused
Re: RA portal charts does not have new data
Click options and you should be able to change it.
There is a small tutorial here when I googled: https://learn.sparkfun.com/tutorials/te ... -mac-linux
There is a small tutorial here when I googled: https://learn.sparkfun.com/tutorials/te ... -mac-linux
Roberto.
Re: RA portal charts does not have new data
Ran the macro and mine is up and running now!! Thanks!!! I did have a bump in the road as I was trying to do the update with my pc connected to the Head Module - doesnt work that way - ha! The minute I plugged the USB cable into the WiFi module, the terminal program did its thing and all is well. Also, it took a couple of times hitting ok before i realized the macro was looping and then what you had said to someone else - that it only had to be ran once made sense. I hit cancel and I was golden!
Again thanks Roberto for the quick reply!
Again thanks Roberto for the quick reply!
Re: RA portal charts does not have new data
thanks Roberto, assume I'm wired to the head unit as I do this? don't believe it was stated here. don't want to have my RA shut down if it doesn't work.rimai wrote:Sorry, tera term is for windows only.
If you want to do it on Mac, you need to use Coolterm and there is no macro option for it.
You will need to manually type it.
Open the serial connection at 57600 baud.
Then type $$$ and it should respond with CMD.
Then type the following commands:Code: Select all
set i h 104.36.18.155 save reboot
thanks
Re: RA portal charts does not have new data
No. we are programming the wifi attachment, so you have to connect to the wifi attachment.
Roberto.
Re: RA portal charts does not have new data
this is bs!!!
first it won't let me type $$$ when I connect to 57600 so I copied and pasted and nothing happened......
first it won't let me type $$$ when I connect to 57600 so I copied and pasted and nothing happened......
Re: RA portal charts does not have new data
I have wifi attachment connected to serial port and baud 57600. your instructions say to "then type $$$ and it should respond with CMD" which I cannot do. what should I do now to get this working?
thanks
thanks
Re: RA portal charts does not have new data
Click Options
Choose the serial port connected to your wifi attachment
Choose 57600 baud rate
Click Ok
Click Connect
Type $$$
Choose the serial port connected to your wifi attachment
Choose 57600 baud rate
Click Ok
Click Connect
Type $$$
Roberto.
Re: RA portal charts does not have new data
this is what I got after following your steps
<4.41>
not sure how to upload screenshots or pics, I'm a computer knob
<4.41>
not sure how to upload screenshots or pics, I'm a computer knob
Re: RA portal charts does not have new data
There you go. you are in command mode.
Now type the other commands
Now type the other commands
Roberto.
Re: RA portal charts does not have new data
the following is what I got. now what?
Disconn from Joshua2001,LOST-AP
Auto-Assoc Joshua2001 chan=6 mode=MIXED SCAN OK
Joining Joshua2001 now..
Associated!
DHCP: Start
DHCP in 1798ms, lease=604800s
IF=UP
DHCP=ON
IP=192.168.0.34:2000
NM=255.255.255.0
GW=192.168.0.1
Disconn from Joshua2001,LOST-AP
Auto-Assoc Joshua2001 chan=6 mode=MIXED SCAN OK
Joining Joshua2001 now..
Associated!
DHCP: Start
DHCP in 1798ms, lease=604800s
IF=UP
DHCP=ON
IP=192.168.0.34:2000
NM=255.255.255.0
GW=192.168.0.1
Re: RA portal charts does not have new data
thanks Roberto but the portal still has dec 23rd as the last data for relays and web charts?
Re: RA portal charts does not have new data
Then something went wrong.
Connect to the module again and send "get e" command.
Paste the response
Connect to the module again and send "get e" command.
Paste the response
Roberto.
Re: RA portal charts does not have new data
I typed "get e" and this was the response
<h1>Bad Request</h1><h1>Bad Request (Invalid URL)</h1>
<h1>Bad Request</h1><h1>Bad Request (Invalid URL)</h1>
Re: RA portal charts does not have new data
You didn't enter cmd mode.
You need to type $$$ to enter command mode or no command will be accepted
You need to type $$$ to enter command mode or no command will be accepted
Roberto.
Re: RA portal charts does not have new data
heres what I got
CMD
get e
wifly-GSX Ver: 4.41 Build: r1057, Jan 17 2014 10:26:29 on RN-131
SSID=WiFly-GSX-db
Pass=
Linkmon=3600
Beacon=102
Reboot=0
IF=UP
DHCP=ON
IP=192.168.0.34:2000
NM=255.255.255.0
GW=192.168.0.1
HOST=198.171.134.6:80
PROTO=TCP,
MTU=1524
FLAGS=0x6
TCPMODE=0x0
BACKUP=0.0.0.0
OPEN=
CLOSE=
REMOTE=
FlushSize=1420
MatchChar=0
FlushTimer=5
IdleTimer=3
CmdChar=$
DNS=192.168.0.1
Name=www.reefangel.com
Backup=rn.microchip.com
Lease=86400
FTP=198.175.253.161:21
File=wifly-GSX.img
User=roving
Pass=Pass123
Dir=public
Timeout=200
FTP_mode=0x0
SSID=Joshua2001
Chan=0
ExtAnt=0
Join=1
Auth=OPEN
Mask=0x1fff
Rate=12, 24 Mb
Linkmon=5
Passphrase=Tes
EAP_Id=userid
EAP_User=peap-user
SleepTmr=0
WakeTmr=0
Trigger=0x10
Autoconn=0
IoFunc=0x0
IoMask=0x20f0
IoValu=0x0
DebugReg=0x0
PrintLvl=0x0
LaunchStr=web_app
TimeEna=0
TIMEADR=64.90.182.55:123
Zone=7
Baudrate=57600
Flow=0x0
Mode=0x2
Cmd_GPIO=0
JoinTmr=1000
Replace=0x24
DeviceId=ReefAngelWifi
Password=
Format=0x0
Signal=0
Average=5
BCAST=255.255.255.255:55555
Interval=0x7
Backup=0.0.0.0:0
Sensor=0x0
SensePwr=0x0
<4.41>
CMD
get e
wifly-GSX Ver: 4.41 Build: r1057, Jan 17 2014 10:26:29 on RN-131
SSID=WiFly-GSX-db
Pass=
Linkmon=3600
Beacon=102
Reboot=0
IF=UP
DHCP=ON
IP=192.168.0.34:2000
NM=255.255.255.0
GW=192.168.0.1
HOST=198.171.134.6:80
PROTO=TCP,
MTU=1524
FLAGS=0x6
TCPMODE=0x0
BACKUP=0.0.0.0
OPEN=
CLOSE=
REMOTE=
FlushSize=1420
MatchChar=0
FlushTimer=5
IdleTimer=3
CmdChar=$
DNS=192.168.0.1
Name=www.reefangel.com
Backup=rn.microchip.com
Lease=86400
FTP=198.175.253.161:21
File=wifly-GSX.img
User=roving
Pass=Pass123
Dir=public
Timeout=200
FTP_mode=0x0
SSID=Joshua2001
Chan=0
ExtAnt=0
Join=1
Auth=OPEN
Mask=0x1fff
Rate=12, 24 Mb
Linkmon=5
Passphrase=Tes
EAP_Id=userid
EAP_User=peap-user
SleepTmr=0
WakeTmr=0
Trigger=0x10
Autoconn=0
IoFunc=0x0
IoMask=0x20f0
IoValu=0x0
DebugReg=0x0
PrintLvl=0x0
LaunchStr=web_app
TimeEna=0
TIMEADR=64.90.182.55:123
Zone=7
Baudrate=57600
Flow=0x0
Mode=0x2
Cmd_GPIO=0
JoinTmr=1000
Replace=0x24
DeviceId=ReefAngelWifi
Password=
Format=0x0
Signal=0
Average=5
BCAST=255.255.255.255:55555
Interval=0x7
Backup=0.0.0.0:0
Sensor=0x0
SensePwr=0x0
<4.41>
Last edited by Reefology on Thu Dec 29, 2016 8:36 pm, edited 1 time in total.
Re: RA portal charts does not have new data
You didn't do it correctly.
The host is still the old one:
HOST=198.171.134.6:80
After entering command mode you need to enter these three commands:
Copy and paste the whole log when you do it just so we can see what went wrong.
The host is still the old one:
HOST=198.171.134.6:80
After entering command mode you need to enter these three commands:
Code: Select all
set i h 104.36.18.155
save
reboot
Roberto.
Re: RA portal charts does not have new data
sure I did something wrong but heres what I got.
‰ñúã6‘;öÇfiûÊÊ9ßã˝ª+
î˝¥lú>i.‘fi.¥—∆ãn˝ÏˆúãN‘;9&)Ê.»˝ßɲ{+.¨ˇ.|ú$$$
ERR: ?-Cmd
<4.41>
set i h 104.36.18.155
AOK
<4.41>
save
Storing in config
<4.41>
reboot
*Reboot*.HTTP/1.1 400 Bad Request
Content-Type: text/html; charset=us-ascii
Server: Microsoft-HTTPAPI/2.0
Date: Fri, 30 Dec 2016 03:06:32 GMT
Connection: close
Content-Length: 311
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN""http://www.w3.org/TR/html4/strict.dtd">
<HTML><HEAD><TITLE>Bad Request</TITLE>
<META HTTP-EQUIV="Content-Type" Content="text/html; charset=us-ascii"></HEAD>
<BODY><h2>Bad Request</h2>
<hr><p>HTTP Error 400. The request is badly formed.</p>
</BODY></HTML>
‰ñúã6‘;öÇfiûÊÊ9ßã˝ª+
î˝¥lú>i.‘fi.¥—∆ãn˝ÏˆúãN‘;9&)Ê.»˝ßɲ{+.¨ˇ.|ú$$$
ERR: ?-Cmd
<4.41>
set i h 104.36.18.155
AOK
<4.41>
save
Storing in config
<4.41>
reboot
*Reboot*.HTTP/1.1 400 Bad Request
Content-Type: text/html; charset=us-ascii
Server: Microsoft-HTTPAPI/2.0
Date: Fri, 30 Dec 2016 03:06:32 GMT
Connection: close
Content-Length: 311
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN""http://www.w3.org/TR/html4/strict.dtd">
<HTML><HEAD><TITLE>Bad Request</TITLE>
<META HTTP-EQUIV="Content-Type" Content="text/html; charset=us-ascii"></HEAD>
<BODY><h2>Bad Request</h2>
<hr><p>HTTP Error 400. The request is badly formed.</p>
</BODY></HTML>
Re: RA portal charts does not have new data
CMD
set i h 104.36.18.155
AOK
<4.41>
save
Storing in config
<4.41>
reboot
*Reboot*.
I tried it again and now got this which looks right to me...which means absolutely nothing
set i h 104.36.18.155
AOK
<4.41>
save
Storing in config
<4.41>
reboot
*Reboot*.
I tried it again and now got this which looks right to me...which means absolutely nothing
Re: RA portal charts does not have new data
ok, got the new host
ERR: ?-Cmd
<4.41>
get e
wifly-GSX Ver: 4.41 Build: r1057, Jan 17 2014 10:26:29 on RN-131
SSID=WiFly-GSX-db
Pass=
Linkmon=3600
Beacon=102
Reboot=0
IF=UP
DHCP=ON
IP=192.168.0.34:2000
NM=255.255.255.0
GW=192.168.0.1
HOST=104.36.18.155:80
PROTO=TCP,
MTU=1524
FLAGS=0x6
TCPMODE=0x0
BACKUP=0.0.0.0
OPEN=
CLOSE=
REMOTE=
FlushSize=1420
MatchChar=0
FlushTimer=5
IdleTimer=3
CmdChar=$
DNS=192.168.0.1
Name=www.reefangel.com
Backup=rn.microchip.com
Lease=86400
FTP=198.175.253.161:21
File=wifly-GSX.img
User=roving
Pass=Pass123
Dir=public
Timeout=200
FTP_mode=0x0
SSID=Joshua2001
Chan=0
ExtAnt=0
Join=1
Auth=OPEN
Mask=0x1fff
Rate=12, 24 Mb
Linkmon=5
Passphrase=Tes
EAP_Id=userid
EAP_User=peap-user
SleepTmr=0
WakeTmr=0
Trigger=0x10
Autoconn=0
IoFunc=0x0
IoMask=0x20f0
IoValu=0x0
DebugReg=0x0
PrintLvl=0x0
LaunchStr=web_app
TimeEna=0
TIMEADR=64.90.182.55:123
Zone=7
Baudrate=57600
Flow=0x0
Mode=0x2
Cmd_GPIO=0
JoinTmr=1000
Replace=0x24
DeviceId=ReefAngelWifi
Password=
Format=0x0
Signal=0
Average=5
BCAST=255.255.255.255:55555
Interval=0x7
Backup=0.0.0.0:0
Sensor=0x0
SensePwr=0x0
<4.41>
ERR: ?-Cmd
<4.41>
get e
wifly-GSX Ver: 4.41 Build: r1057, Jan 17 2014 10:26:29 on RN-131
SSID=WiFly-GSX-db
Pass=
Linkmon=3600
Beacon=102
Reboot=0
IF=UP
DHCP=ON
IP=192.168.0.34:2000
NM=255.255.255.0
GW=192.168.0.1
HOST=104.36.18.155:80
PROTO=TCP,
MTU=1524
FLAGS=0x6
TCPMODE=0x0
BACKUP=0.0.0.0
OPEN=
CLOSE=
REMOTE=
FlushSize=1420
MatchChar=0
FlushTimer=5
IdleTimer=3
CmdChar=$
DNS=192.168.0.1
Name=www.reefangel.com
Backup=rn.microchip.com
Lease=86400
FTP=198.175.253.161:21
File=wifly-GSX.img
User=roving
Pass=Pass123
Dir=public
Timeout=200
FTP_mode=0x0
SSID=Joshua2001
Chan=0
ExtAnt=0
Join=1
Auth=OPEN
Mask=0x1fff
Rate=12, 24 Mb
Linkmon=5
Passphrase=Tes
EAP_Id=userid
EAP_User=peap-user
SleepTmr=0
WakeTmr=0
Trigger=0x10
Autoconn=0
IoFunc=0x0
IoMask=0x20f0
IoValu=0x0
DebugReg=0x0
PrintLvl=0x0
LaunchStr=web_app
TimeEna=0
TIMEADR=64.90.182.55:123
Zone=7
Baudrate=57600
Flow=0x0
Mode=0x2
Cmd_GPIO=0
JoinTmr=1000
Replace=0x24
DeviceId=ReefAngelWifi
Password=
Format=0x0
Signal=0
Average=5
BCAST=255.255.255.255:55555
Interval=0x7
Backup=0.0.0.0:0
Sensor=0x0
SensePwr=0x0
<4.41>
Last edited by Reefology on Thu Dec 29, 2016 8:35 pm, edited 1 time in total.
Re: RA portal charts does not have new data
charts still showing data from 12/23
Re: RA portal charts does not have new data
It shows data to me.
The controller only sends data every 5 minutes. You just needed to wait.
The controller only sends data every 5 minutes. You just needed to wait.
Roberto.
Re: RA portal charts does not have new data
ok, thanks Roberto for putting up with my ignorance.
Re: RA portal charts does not have new data
The macro that Rimai directs everyone to try was posted in 2014. If the servers were changed would something need to be changed to point to the new servers?
Re: RA portal charts does not have new data
No.
Although the post is old. The attachment is new and updated.
Although the post is old. The attachment is new and updated.
Roberto.